Bharat Heavy Electricals Limited - Chhattisgarh

38664011 tender for pkg a and b:balance main civil package including fgd and lhp and ghp system excluding rmc supply, shop fabrication and ercetion at 2x250 mw nspcl bhilai fgd project 100 earth work earth work: earth work in excavation, backfilling and disposal including necessary men/women, materials, equipment, loading, transportation, unloading, dewatering etc as per specification, drawing and as directed by engineer in charge for the following: a101 earth work in excavation in all types of soil/ash which can be excavated by any means including setting out, levelling, dewatering (but excluding special type of dewatering viz. well point method), shoring & strutting (wherever required), dressing the sides & bottom, all lifts, ramming/compacting the excavated bottom, stacking, disposal of surplus excavated materials within a lead upto 1 km, spreading/levelling of disposed materials etc all complete for following depths below ground level. a depth from ground level but not exceeding 2 m cum 9730.0 1.9839634022 b depth exceeding 2 m but not exceeding 4 m cum 7710.0 1.9651950577 c depth exceeding 4 m but not exceeding 6 m cum 1822.5 0.5806699628 d depth exceeding 6 m but not exceeding 8 m cum e depth exceeding 8 m but not exceeding 10 m cum 103 earth work in excavation in soft rock (rock without any recovery of exacavated materials in the form of hard stone/boulder) including weathered rock which can be excavated by means of crow bar, pick axe, pneumatic rock breaker attachment with excavator machine etc but does not require chiselling or blasting including setting out, levelling, dewatering (wherever required), shoring & strutting, (wherever required), dressing the sides & bottom, all lifts, ramming/compacting the excavated bottom, stacking, disposal of surplus excavated materials within a lead upto 1 km, spreading / levelling of disposed materials etc all complete for following depths below ground level. a depth from ground level but not exceeding 2 m cum b depth exceeding 2 m but not exceeding 4 m cum c depth exceeding 4 m but not exceeding 6 m cum d depth exceeding 6 m but not exceeding 8 m cum e depth exceeding 8 m but not exceeding 10 m cum 104 earth work in excavation upto any depth below ground level in hard rock requiring blasting (but excluding controlled blasting) including wedging, line drilling, pre shearing etc as required for grading, setting out, levelling, dewatering (wherever required), dressing the sides & bottom, all lifts, necessary licenses/statuatory clearances for blasting, supply, storage & handling of blasting materials, stacking/disposal of surplus excavated material within a lead upto 1 km, spreading / levelling of disposed materials etc all complete as per specification, drawing and as directed by the engineer in charge. b depth exceeding 2 m but not exceeding 4 m cum c depth exceeding 4 m but not exceeding 6 m cum d depth exceeding 6 m but not exceeding 8 m cum e depth exceeding 8 m but not exceeding 10 m cum a107 earthwork in back filling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 300 mm thickness using/with selected materials from compulsorily excavated earth available within a lead upto 1 km and compacted as specified including re excavation of stacked earth, watering, ramming/compaction by manual/mechanical means, dressing etc all complete.for the following. a each layer compacted so as to achieve at least 90% maximum dry density as per is 2720 (part vii) cum 27737.8 5.4207431393 b each layer compacted so as to achieve at least 95% maximum dry density as per is 2720 (part vii) cum 100.0 0.0216636339 a108 earthwork in back filling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 300 mm thickness using/with selected materials earth directly from excavation within a lead upto 1km and compacted as specified including re excavation of stacked earth, watering, ramming/compaction by manual/mechanical means, dressing etc all complete.for the following: a each layer compacted so as to achieve at least 90% maximum dry density as per is 2720 (part vii) cum 20000.0 1.9539557616 b each layer compacted so as to achieve at least 95% maximum dry density as per is 2720 (part vii) cum 100.0 0.0102574577 a109 extra over st no. 101 and 103 to a108 for carriage of material/earth for every 500m or part thereof beyond an initial lead of 1km. cum a110 earth work in backfilling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 300 mm thickness so as to achieve required compaction with approved borrowed soil (borrowed soil to be arranged by the bidder) and compacted as specified including supplying borrowed soil, royalty/seignorage fee (if any), sorting, spreading, breaking clods, watering, ramming/compaction by manual/mechanical means, dressing, finishing to required lines, grades and slopes, testing, all lead and lifts etc all complete as per specification, drawing and as directed by the engineer for the following: a each layer compacted so as to achieve at least 95% maximum dry density as per is 2720 (part vii) cum 100.0 0.1063075069 b each layer compacted so as to achieve at least 90% maximum dry density as per is 2720 (part vii) cum 10.0 0.0095672544 a111 supplying and filling sand upto any depth under floors, around foundations, plinths, paving, passages, etc. in layers not exceeding 300 mm thickness and compacted so as to achieve at least 80% relative density as per is 2720 (part xiv) including spreading, watering, ramming/compaction by manual / mechanical means, dressing, royalty (if any) etc. all complete. cum 633.8 1.4686634669 a112 supplying and filling clean and well graded sand (conforming to is 383 with grading zone i to iii) upto any depth under floors, around foundations, plinths, paving, tank foundations, etc. in layers not exceeding 300 mm thickness and compacted so as to achieve at least 80% relative density as per is 2720 (part xiv) including spreading, watering, ramming/compaction by manual / mechanical means, dressing, royalty (if any) etc. all complete. cum 1651.5 3.8597998180 a113 earth work in stripping of top soil upto a minimum depth of 0.30m below ground level so as to exclude all debris, grass, vegetation, bushes, trees having girth upto 300mm including roots and organic materials etc for leveling and grading including dressing to specified levels & grades and compacting the graded/stripped surface by manual/mechanical means, disposal of stripped materials within a lead upto 1km etc all complete as per specification, drawing and as directed by the engineer in charge. sqm 200 concrete works concrete work: providing and placing concrete work including cost of labour, materials (unless otherwise specified in boq/contract specification) and equipment for handling, transportation, batching, mixing, placing, vibrating and curing (excluding cost of centering, shuttering and reinforcement) with mechanised equipments like batching plant, transit mixer, concrete pump etc. complete as per drawing, specifications and as per direction of engineer in charge for the following:( bhel will supply ready mix as per scope of matrix). (scope of transportation of concrete through transit mixer from batching plant to pouring point & concrete pouring through concrete pump/suitable boom pressure as per site requirement is in bhels rmc agency scope) 201 concrete of grade m7.5 (1 part cement, 4 part sand, 8 parts of 40 mm graded aggregate by volume) as mass filling course, lean concrete, levelling course, mud mat under and around foundations/ floors, at any depth below finished floor level etc. cum 905.4 1.3732631160 202 concrete of grade m10 (1 part cement, 3 part sand, 6 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors at any depth below finished floor level etc. cum 81.0 0.1228594240 203 concrete of grade m15 (1 part cement, 2 part sand, 4 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors at any depth below finished floor level etc. cum 10.0 0.0151682702 204 concrete of grade m20 (1 part cement, 1.5 part sand, 3 parts of 20 mm graded aggregate by volume) under floors, paving, plinth protection, pipe encasing etc complete. cum 20.0 0.0303349202 a204 concrete of grade m20 (1 part cement, 1.5 part sand, 3 parts of 12 mm graded aggregate by volume) under floors, paving, plinth protection, pipe encasing etc complete. cum 38.3 0.0581115517 205 providing and laying design mix cement concrete conforming to is:456 & is 10262 2009 for reinforced concrete works with coarse sand and graded hard stone aggregate of 20mm nominal size in foundations/substructure, grade slab, paving, drains, under floors etc at all level below finished floor level, any shape, position or thickness etc complete including use of plasticizer/ superplasticizer conforming to is:9103 (latest) to achieve required slump in concrete all complete as per specification & drawing for the following. a m 25 grade cum 3400.0 5.1570466020 b m 30 grade cum 100.0 0.1516778412 ac m 35 grade cum 190.0 0.2881874123 206 providing and laying design mix cement concrete of grade conforming to is:456 & is 10262 2009 for reinforced concrete works with coarse sand and graded hard stone aggregate of 20mm nominal size in superstructure at upto 9 mtr above finished floor level, any shape, position or thickness etc complete including use of plasticizer/ superplasticizer conforming to is:9103 (latest) to achieve required slump in concrete all complete as per specification & drawing for the following. a m25 grade cum 880.0 1.3347656510 b m 30 grade cum 10.0 0.0151682702 a207 providing and laying design mix cement concrete confirming to is:456 & is 10262 2009 for reinforced concrete works of grade mentioned below in machine foundations for tg, gas turbine, id/fd/pa fans, bfp, coal mills, booster fans, ball mills, etc. at all elevations below/above finished floor level except tg deck and top decks supported over vibration isolation system but including tg foundation columns with addition of suitable plasticizer conforming to is 9103(latest) to achieve a slump more than 125mm in concrete as per manufacturers recommendation with 20 mm nominal size graded aggregate in concrete all complete as per specification & drawing a m 30 grade cum b m 35 grade cum 10.0 0.0151682702 211 providing and encasing of structural steel member with concrete using nominial aggregate size of 12.5mm down. encased member shall be wrapped with welded wire mesh/chicken wire mesh with proper lap etc. complete as per specification for the following grades. (payment of welded wire mesh, chicken wire mesh shall be made separately) a m20 grade cum 35.0 0.0530873254 b m25 grade cum 212 screed concrete conforming to is 456 with coarse sand and graded hard stone aggregate 12.5mm/6 mm nominal size on the roof at any level or thickness, drains etc complete as per following. a 1:2:4 (1 part cement, 2 part sand, 4 parts of aggregate by volume) (m15) cum 27.1 0.0410282104 b 1:1.5:3 (1 part cement, 1.5 part sand, 3 parts of aggregate by volume) (m20) cum 213 providing and laying design mix cement concrete as per is:456 & is 10262 2009 for reinforced concrete works using graded aggregate for concrete in precast works like roof slabs/trench covers, fins, lintels, chajas, beams, columns, wall panels, facias etc.at all levels in all kinds of work including formwork/moulds, curing, rendering the top exposed surface with cement sand mortar (1:3), handling, storing, transpoting, all leads, erection without damage, setting in position with cement sand mortar (1:3), filling the gaps between adjacent preacast units with m30 grade concrete or cement sand mortar (1:3) and including making of holes for bolts for fixing, welding etc.complete with graded aggregate (20/12.5/10 mm) and as per specification and drawing for following grades. a m 25 grade cum 22.0 0.0333695463 b m 30 grade cum 10.0 0.0151682702 214 providing and laying design mix cement concrete as per is:456, is 3370 & is 10262 2009 for reinforced concrete works using graded aggregate for concrete in water retaining/conveying structures including addition of suitable plastisizer cum waterproofing cement additives confirming to is 9103 latest to achieve a slump more than 125 mm in concrete as per manufacturers recommendation and conforming to limits of permeability as per is 2545 and specification with 20 mm nominal size graded aggregate for following grades. watertightness is to be ensured including structural grouting if required. a m 25 grade cum 5.0 0.0075841351 b m 30 grade cum 5.0 0.0075841351 215 dismantling concrete work for all types of structures at all levels including stacking of servicable material to a lead of 500 m and disposal of unservicable material upto a lead of 2 km, cutting of reinforcement, labour, equipment, safety precautions etc all complete as per drawings, specification and instructions of engineer in charge. a plain cement concrete of all grades cum 10.0 0.0215161961 b reinforced cement concrete of all grades cum 10.0 0.0310105417 216 chipping of concrete in reinforced concrete work, cutting pockets, making openings at all levels and according to shapes, disposal of waste materials upto a lead of 2 km as directed by engineer including equipment, safety precautions, making good the broken surface etc all complete as per specification, drawing, instructions of engineer in charge but excluding cutting of reinforcement . cudm 10.0 0.0009559153 217 extra over and above st no 216 for cutting of reinforcement, all sizes and types including labour, equipment, return of cut reinforcement to store etc all complete as per specification, drawings and instructions of engineer in charge. measurement shall be on the cross sectional area of reinforcement cut. sqcm 2.0 0.0000129616 218 cutting reinforced concrete with mechanised tools like core drilling machine etc. for cutting pockets, holes, cores in slab, beam, column or foundation as per direction of engineer in charge. cudm 10.0 0.0045025233 219 providing and applying curing compound (water based) of approved make where ever required as per manufacturers specification. sqm 5.0 0.0009672567 223 cutting of existing concrete/ rcc slab (total thickness upto 250mm including floor finsih & deck sheet if any) inside control room/ pump house or anywhere inside boundary using power tools of (dd2e of hilti/ bosch make or equivalent) with low noise and dust including cutting reinforcements, removing the rubbish within a lead of 1 km, including making good the broken edges/ surface with cement mortar, painting, finishing to match with existing finishing, scaffolding/ supporting at all level, all complete and as directed by engineer (measurements shall be taken as per cutting surface area). sqm 224 extra for rcc work above 9 mtr above ffl for each 5 mtr lift or part thereof cum 110.0 0.0165502969 300 form works formwork: providing, fixing and removing formwork at all elevations for all structures, as per specifications and including all labour, material, scaffoldings and centereing etc. complete as per drawing, specifications and as per direction of engineer in charge for the following: 301 fairface form work with good quality water proof ply wood of minimum 12mm thickness and smooth surface below finished ground floor level for foundations, footings, base of columns, walls, columns, pilasters, beams, mass concrete, trenches etc.including chamfering of edges as per drawing, specification and instruction of engineer in charge.. sqm 7349.4 7.0247950019 a302 fairface form work with good quality water proof ply wood of minimum 12mm thickness and smooth surface above finished ground floor level for columns, beams, suspended floors, roofs, lintels, cantilevers, staircases, landings, balconies, etc. including chamfering of edges as per drawing.for all heights as per specification, drawing and instruction of engineer in charge. sqm 2560.0 2.9091549746 b302 ordinary form work above finished ground floor level for columns, beams, suspended floors, roofs, lintels, cantilevers, staircases, landings, balconies, etc. including chamfering of edges as per drawing.for all heights as per specification, drawing and instruction of engineer in charge. sqm 500.0 0.4501146102 304 providing, fixing and removing formwork in block outs/pockets and openings (below 0.1 sqm plan area) at all elevations including cutting, formation of all shapes and all other operations required for making the required shape and size all complete as per specification, drawing and instruction of engineer in charge. a upto 150 mm depth each 162.0 0.0701933494 b pockets of depths more than 150mm and upto 300 mm depth each 37.0 0.0282140843 c pockets of depths more than 300mm and upto 600 mm depth each 34.0 0.0478087285 d pockets of depths more than 600mm and upto 1000 mm depth each 54.0 0.1212376084 e pockets of depths more than 1000mm and upto 1500 mm depth each 10.0 0.0327959971 f pockets of depths more than 1500mm and upto 2000 mm depth each 10.0 0.0434374411 400 reinforcement reinforcement work: reinforcement work including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling etc at all level as per specification, drawings and as directed by engineer in charge for the following:. 401 providing, straightening, cutting, bending, placing in position at all level, binding of mild steel reinforcements conforming to grade 1 of is:432 part 1 in concrete including cost of reinforcement steel, binding wire, labour, scaffolding, transportation to & from stores etc. all complete as per specifications & drawings. mt a402 providing, straightening, cutting, bending, placing in position at all level, binding in position of steel reinforcements of high yield strength deformed tmt steel bars of grade fe 500 having minimum elongation of 14.5 % or fe 500d conforming to is:1786 including cost of reinforcement steel, binding wire, labour, scaffolding, transportation to & from stores etc complete all as per specifications, drawings and as directed by engineer.(bhel will supply tmt free of cost as per tcc) mt 338.0 6.7873537326 a402 a taking delivery from bhel store, unloading the same at contractor’s yard straightening, cutting, bending, of steel reinforcements of high yield strength deformed tmt steel bars of grade fe 500 having minimum elongation of 14.5 % or fe 500d conforming to is:1786 including all labours and t&p all complete. mt 10.0 0.0913044967 a402 b placing in position, binding in position the cut and bend reinforcement steel using binding wires the steel reinforcements of high yield strength deformed tmt steel bars of grade fe 500 having minimum elongation of 14.5 % or fe 500d conforming to is:1786 including all labours and t&p all complete mt 10.0 0.1095057728 405 providing & fixing of rebar in existing concrete surface by inserting reinforcemnet bar with epoxy based suitable bonding compound of hilti or equivalent make (hit re 500 of hilti or equivalent make) for interconnection of new r.c. structure with existing r.c. structure. depth of drilled hole should be suitable to develop maximum recommended strength as per approved manufacturers recommendation. this item includes supply of all materials including bonding chemicals, t&p required to execute the work, cost of all labour, transportation of chemical, staging to reach work place etc. all complete as directed by engineer in charge. random pull out non destructive test as directed by engineer shall beconducted to ensure strength of bond and same is included in this item. reinforcement bar shall be paid separately under item no. 402, 403, 405 as applicable. a 12mm reinforcement bar nos. 1.0 0.0006318762 b 16mm reinforcement bar nos. 1.0 0.0009996606 c 20mm reinforcement bar nos. 1.0 0.0014095701 406 supply and fixing reinforcement bar couplers (of approved manufacturers as per the relevant is code) in position for steel reinforcements of tmt steel of grade fe 500d or 500eqr confirming to is:1786 including , labour, scaffolding, transportation to & from stores etc complete all as per specifications, drawings and as directed by engineer.(agency has to supply reinforcement bar couplers). a 12mm dia nos. 1.0 0.0000696684 b 16mm dia nos. 1.0 0.0000891108 c 20mm dia nos. 1.0 0.0001117935 d 25mm dia nos. 1.0 0.0001830821 e 28mm dia nos. 1.0 0.0002284476 f 32mm dia nos. 1.0 0.0002981160 500 water prooofing works roof treatment works: roof treatment works including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, curing, sampling, testing etc at all level as per specification, drawings and as directed by engineer in charge for the following: a502 providing and laying topping plaster with cement mortar 1:4 (1 cement : 4 sand) and thickness of 25 mm including preparation of surface, batching, mixing, leveling etc. all complete. sqm 1301.8 0.2792633755 a506 providing and applying pu based water proofing treatment with one coat of polymerised mastic over the rcc roof to achieve smooth surface as primer with an application rate of minimum 6 sq.m per litre and two successive liquid coatings of high solids content urethane pre polymers or equivalent material based finish coats as per relevant is/astm standards(astm c 836 and astm c 898), to form an elastomeric membrane with overall dry film thickness 1.5 mm subject to minimum 500 gm/sqm/coat application rate. item includes surface preparation, polyscrim cloth /fabric, polymerised mortar base preparation, etc all complete as per specifications and directions of engineer in charge. sqm 1301.8 2.3670051595 507 providing and laying wearing course consisting of 25mm thick plain cement concrete of grade m15 (1:2:4) with graded aggregate of 12.5mm size cast in panels of maximum size 1.2mx1.2m and reinforced with 0.56 mm dia. galvanised chicken wire mesh and sealing of joints (in grooves of 6mm x 6mm) using silicon /elastomeric compound etc all complete. (bhel will supply rmc as per scope of work) sqm 1301.8 1.0010005193 510 providing and laying cement concrete chequered flooring tiles of 22 mm thickness and size 300x300 mm conforming to is 13801 with 8 mm thick 1:4 cement mortar over the top most layer of roofing treatment in pathway or entire area with fine joints including sealing of joints (silicon/elastomeric sealant) and providing expansion gap in both directions filled up with (silicon/elastomeric) joint sealant, including underbed(as per drawings) filled up with (silicon/elastomeric) joint sealant etc all complete. (water proofing paid elsewhere)(including cost of cement for tiles making) sqm 373.5 0.4553883465 b511 providing and applying min two coats of bitumen grade 85/25 as per is 702 ( @ 1.7kg/sqm)with 1% antistripping compound conforming to is 6241 in foundation, wall, column etc on concrete surfaces exposed to soil / ash including surface preparation etc. all complete. sqm 3550.0 0.9199259370 513 providing and mixing water proofing compound conforming to is:2645 in concrete or cement mortar all complete. kg 50.0 0.0124268994 a518 providing and applying waterproofing treatment (two component transparent polyamide cured epoxy sealer coating, having solid by volume minimum 40%+ 2%, of minimum 50 micron dft & sealer coat shall be followed with the application of epoxy phenolic coating, solid by volume minimum 63%, of minimum 400 micron dft for the concrete surfaces of underground water retaining structure including surface preparation etc. all complete as per specification. sqm 10.0 0.0040342868 a519 providing and applying waterproofing treatment with minimum 400 micron food grade epoxy coating complying to fda title 21, part 175.300 for the internal concrete surfaces of water retaining structure including surface preparation etc. all complete as per specification. sqm a520 providing and fixing lining on internal surfaces of sumps with replaceable chlorobuty/bromobutyl rubber lining of minimum 5 mm thickness or with vinly ester based flake glass lining of minimum 3 mm thickness etc. all complete as per specification. sqm a521 providing and fixing acrylic based polymer modified cementitious composite coating system etc. all complete as per specification. sqm 10.0 0.0054762608 a522 providing and fixing minimum two coats acrylic based polymer modified cementitious composite coating system including mixing of fine silica/quartz sand of 0.6 mm nominal size for better abrasion resistance and total nominal thickness of such coating shall be minimum 1.5 mm etc. all complete as per specification. sqm 10.0 0.0057500738 b522 providing and fixing waterproofing treatment to be provided on sunken portion of all vertical and horizontal surfaces of depressed portions of false floor, toilets, w.c., kitchen, pantry and the like consisting of : (i) ist course of applying cement slurry @ 4.4 kg/sq.m mixed with water proofing compound conforming to is 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) iind course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) iiird course of applying blown or residual bitumen applied hot at 1.7 kg. per sq.m of area. (iv) ivth course of 400 micron thick pvc sheet. (overlaps at joints of pvc sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sq.m) etc. all complete. sqm 10.0 0.0099771638 600 joints and fillers joints and fillers: joints & fillers including all labour, material, equipment, transportation, handling etc at all level as per specification, drawings and as directed by engineer in charge for the following: 601 supplying & installation of bitumen impregnated fibre board confirming to is 1838 as joint filler at joints in concrete including nailing, coating of both faces with coal tar pitch/bitumin etc. all complete. a 12 mm wide joints. sqm 10.0 0.0104502609 b 20 mm wide joints. sqm 10.0 0.0164822487 c 25 mm wide joints sqm 10.0 0.0202637850 d 50 mm wide joints sqm 10.0 0.0391261009 603 providing and applying polysulphide based sealant conforming to is:12118 in joints in concrete including cleaning of joints, raking out groove, application of primer, scaffolding etc. all complete for following size grooves: a 25mmx25mm rm 10.0 0.0118096049 b 50mmx25mm rm 10.0 0.0227491649 604 supplying and filling in position hot applied bitumin sealing compund (grade a) confirming to is 1834 including cleaning, mixing, heating, pouring/injecting sealing compound in gaps in joints including application of primer etc. all complete. a 10mm x 40mm rm 10.0 0.0007015446 b 12mm x 25mm rm 10.0 0.0006367368 c 20mmx25mm rm 10.0 0.0007647323 ae 100 mm wide joints with polystyrene board of type 1 conforming to is: 4671 with density 20 kg/cum sqm 10.0 0.0051165774 606 providing and installing pvc joint sealing strips of minimum 3mm thickness and minimum width 100 mm at the construction, expansion and isolation joints from reputed manufacturers as a continuous diaphragm to contain the filler material and/ or to exclude passage of water or any other material into or out of the structure, without any longitudinal joint; and shall be procured and installed in largest practicable lengths having a minimum number of transverse joints with jointing procedure as per the manufacturer’s recommendations including the material and tools required for jointing, testing, protection, etc all complete. the joints in rubber seals shall be vulcanished as needed. rm 10.0 0.0020398261 607 providing and installing strong and tough alkathene sheet or equivalent of about 1 mm in thickness in isolation joints and shall be fixed by an approved adhesive compound on the cleaned surface of the already set concrete as per the manufacturer’s recommendations, to cover it fully including the material and tools required for jointing, testing, protection, etc all complete. sqm 10.0 0.0016995851 608 supplying and filling in position hot applied bitumin sealing compund (grade b) confirming to is 1834 including cleaning, mixing, heating, pouring/injecting sealing compound in gaps in joints including application of primer etc. all complete. a 10mm x 40mm rm 10.0 0.0011892235 b 12mm x 25mm rm 10.0 0.0009980404 c 20mmx25mm rm 10.0 0.0013593440 609 providing and sealing of joints with premium grade silicon sealant ( silpruf of ge silicons or approved equivalent) including cleaning of joints, raking out groove, joint filler tapes, application of primer, curing, scaffolding etc. all complete as per manufacturers recommendation for following size groove: a 25mmx25mm rm 10.0 0.0041849650 b 50mmx25mm rm 10.0 0.0074772022 610 providing and fixing pvc water stops in joints conforming to is 12200 & is 15058 all complete for the following: (bulb or kicker type) d 230 mm wide and 6 mm thick rm 10.0 0.0040780320 612 providing and applying approved fire retardant sealant in joints/openings including cleaning of joints/openings, raking out groove, application of primer, scaffolding etc. all complete. a 25mmx25mm rm 10.0 0.0144440428 b 50mmx25mm rm 10.0 0.0279953579 613 providing and fixing g.i strips minimum 1.5mm thk and 150mm wide including fixing accessories etc. all complete. kg 10.0 0.0024221923 614 providing and fixing aluminium strips minimum 18 swg thk and 300mm wide over expansion joints with minimum lap of 50mm length including brass / aluminium screws, rawl plugs etc. all complete. kg 10.0 0.0075825149 615 providing and fixing 300 mm wide stainless steel strips over expansion joints with minimum lap of 50mm length including stainless steel screws, rawl plugs etc. all complete. kg 10.0 0.0069879032 700 ms embedments ms embedments: embedments including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling etc. at all level as per specification, drawings and as directed by engineer in charge for the following: 701 supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting etc. all complete. mt 1.0 0.1524490543 a701 supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting, manual cleaning and providing with primer coat of chlorinated rubber based zinc phosphate primer of minimum 50 micron dry film thickness (dft). etc. all complete. mt 4.0 0.7611305769 702 supply, fabrication, transportation, delivery at site and erection, installation and alignment of mild steel foundation bolt assembly conforming to is:2062 and grade 1 of is:432 in concrete along with nuts, lock nuts (as per is:1363, 1364 and is:3138), washers, anchor plates, stiffner plates, protective tape, pipe sleeves, templates etc. including welding, cutting, grinding, threading, drilling etc. all complete. mt a703 same as above items 701, a701 & 702 with bhel supplied material free of cost including loading, transportation, unloading etc. all complete from bhel store to plant site. a mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. mt 9.9 0.3427604570 b mild steel foundation bolt assembly conforming to is:2062 and grade 1 of is:432 in concrete along with nuts, lock nuts (as per is:1363, 1364 and is:3138), washers, anchor plates, stiffner plates, protective tape, pipe sleeves, templates etc. mt 18.0 0.6188045041 704 supplying, fabricating, erecting and installing following items in concrete/brickwall for all kind of works, including setting material in concrete, layout, scaffoling, cutting, forming, grinding, drilling, bolting, welding, jointing, testing etc. all complete. a ms pipes of all diameters kg 10.0 0.0015294645 b pvc pipes / conduits of all diameters kg 10.0 0.0054163135 c upvc pipes / conduits of all diameters kg 10.0 0.0056496217 d expansion anchor fasteners (galvanised) of hilti make(hud 1 universal fastners) or equivalent of safe tensile capacity as specified below for brick work with expansion sleeve of a6 polyamide: i 8mm dia each 5.0 0.0004568951 ii 10mm dia each 5.0 0.0005314241 iii 12mm dia each 5.0 0.0005946117 iv 14mm dia each 5.0 0.0007744534 e expansion fasteners (mechanical galvanised) of hilti make or equivalent of safe tensile capacity as specified below for concrete work with expansion sleeve of stainless steel: i hst m8 each 5.0 0.0010839108 ii hst m10 each 5.0 0.0015505271 iii hst m12 each 5.0 0.0024740385 iv hst m16 each 5.0 0.0044393356 v hst m20 each 5.0 0.0090698544 vi hst m24 each 5.0 0.0119376004 f chemical expansion fasteners (galvanised)of hilti make or equivalent of safe tensile capacity as specified below for concrete work with anchoring rod,nuts,washers,chemicals all complete,etc: i has e5.8 m8 each 5.0 0.0025275050 ii has e5.8 m10 each 5.0 0.0029957415 iii has e5.8 m12 each 5.0 0.0036859447 iv has e5.8 m16 each 5.0 0.0058618673 v has e5.8 m20 each 5.0 0.0094522205 vi has e5.8 m24 each 5.0 0.0127023326 706 supply and installation of approved 25mm thick vibration damping resilient pads on/around foundation of vibrating equipment and at other locations all complete. sqm 5.0 0.0130846988 707 providing, laying and fixing rails(52kg/rm) and guide rails in concrete for transformer, rail track including cutting of rails, joining of rails, anchoring lugs etc all complete. mt 1.0 0.1268499655 800 grouting grouting: grouting including all labour, material (unless otherwise specified in boq/contract specification), equipment, roughening surface, cleaning, ramming, curing etc. at all level , drawings and as directed by engineer in charge for the following: 801 providing & grouting with cement slurry mix of approved ratio using pressure pump for water retaining concrete structures as per approved procedure including cost of nipples/ nozzles, cement, admixture, curing, pressure pumps, slurry agitator etc. all complete. cost shall include fixing of nipples at maximum 500 mm centre to centre spacing, cutting of nipples after completing of grouting, making good of the nipple hole with appropriate non shrink cement paste, water tightness test etc. all complete wherever specified in the drawing. sqm 1.0 0.0011114541 802 providing & grouting of pocket holes, pipe sleeves under base plates, machinery, pipe supporting structures etc. with mix 1:1 (1 cement :1 sand ) using non shrink admixture etc. all complete. cum 1.0 0.0437760620 803 providing & grouting of pocket holes, pipe sleeves and under base plate of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing etc. all complete with mix 1:1:2 (1 cement : 1 coarse sand : 2 aggregate of 6 mm down graded stonechips ) using non shrink admixture as per specification, drawing and direction of engineer in charge. (cost of all material and cleaning the pocket by compressed air shall be in the scope of the contractor). cum 1.0 0.0332690942 804 providing & grouting of pocket holes, pipe sleeves and under base plates of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing etc. all complete with conbextragp 1 or equivalent as per specification, drawing and direction of engineer in charge. (cost of all material and cleaning of the pockets by compressed air shall be in the scope of the contractor). cum 1.0 0.1356006414 805 providing & grouting of pocket holes, pipe sleeves and under base plates of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing, etc. all complete with conbextra gp 2 or equivalent as per specification, drawing and direction of engineer in charge.(cost of all material and cleaning of the pockets by compressed air shall be in the scope of the contractor). cum 1.0 0.1602357138 806 providing chemical (epoxy) injection grouting with pressure pump for water retaining concrete structures conforming to is:6494, including fixing nozzles, cost of approved chemical, admixture, curing etc. all complete . payment shall be made as per the consumption of chemical grout. kg 1.0 0.0039419356 807 providing on the outer surface of walls, frames, rafts and roof slabs coming in contact with earth, polymer modified cementitious coating in two layers as specified and as per manufacturer’s specifications shall be provided directly on the concrete surface : 50 mm thick p. c. c. (1 : 2 : 4 with 10 mm nominal size stone aggregates) shall be provided under the raft i.e. over the lean concrete, followed by polymer modified cementitious coating in two layers ( slurry mix application ) as per manufacturer’s specification. 50 mm thick p. c. c. ( 1 : 2 : 4 ) with 10 mm nominal size stone aggregates shall then be laid over the polymer modified cementitious coating before laying the raft. sqm 1.0 0.0017157870 808 providing chemical injection grouting with minimum, 12 mm dia (nb) threaded nozzle of suitable length over the surface and along the construction joint line in a grid pattern at a spacing not exceeding 1.5m c/c before concreting operation after the nozzles are fully set, neat cement slurry admixed with water soluble non shrink polymer / monomer based chemical shall be injected through the net work of nozzles with low pressure grout pumps at a pressure of about 2.0 kg/sqcm. cement slurry shall be prepared by mixing cement with non shrink polymer/monomer @ 500 gm/50 kg bag of cement and water, ensuring that water: cement ratio does not exceed 2 (by weight). wetter the structure, lesser should be the water cement ratio. the property of the polymer/monomer should be such that when it is mixed with water @ 0.5% by weight of water, the viscosity of the resultant solution (water and polymer/monomer) should not be more than 1.2 centipoises. plasticizing agent shall be added wherever required. the grouting shall be started at very low pressure and increased gradually to a required pressure. the grouting shall continue, till the hole refuses to take any further grout, even at an increased pressure. applied pressure shall not be more than the designed strength of the concrete. after completion of grouting operation, the nozzles shall be sealed properly to the satisfaction of the engineer sqm 1.0 0.0011438580 900 doors, windows, ventilators, louvers doors & windows: doors, windows, ventilators, louvers, roof ventilators, rolling shutters, partitions including all labour, material (unless otherwise specified in boq/contract specification), equipments, transportation, handling, preparation of working drawings etc. at all level as per specification, drawings and as directed by engineer in charge for the following: a903 providing, fitting and fixing factory made pre laminated solid core flush door shutter as per is 2202 part ii, 35mm thick homogenous particle board bonded with bwp type phenolformaldihyde synthetic resin, partical board core conforming to is 3087 type i, 35x12 mm thick teakwood beading all around including preparation of working drawings. godrej or equivalent make mortice lock with handels on both sides,approved isi mark anodised fittings like door stopper,300mm long tower bolts,16x300mm long aldrops ,125mm long handles on both sides etc. butt hinges, sliding bolt, knobs, (all fittings shall be anoidised aluminium color dyed), finish synthetic paint over primer, screws etc. all complete as per drawing, specification and instruction of engineer in charge. with commercial faces and teak wood edges. (finish painting paid separately) sqm 35.0 0.3108652886 a904 providing and fixing single or double steel door shutters with 45mm thk flush design shutter comprising of two outer sheets of 18 gauge steel sheets rigidly connected and reinforced inside with continuous vertical 20 gauge stiffeners, spot welded in position at not more than 150mm on centres including void filled with mineral wool (density as per specification), all fittings, godrej or equivalent make mortice lock with handle on both sides, shop and final painting etc all complete. side , top sqm 25.0 0.2725022997 and bottom edges of shutters shall be reinforced by continuous pressed steel channel with minimum 18g. a906 providing and fixing anodized extruded aluminium doors (single or double shutter) conforming to is:1948, is:1949 fabricated from extruded sections of hindalco/jindal/indal or equivalent make having minimum 2mm wall thickness as per is:1285, is:733 and anodized and electro color coating of required shade as per is 1868 ( minimum anodized coating of grade ac15 ). fixed with rawl plugs, expansion fasteners,ss screws / fixing clips necessary filling of gaps at junctions, at top, bottom & sides with required pvc / neoprene felt for bi metallic protection etc. glazing shall be clear float/toughened glass of 6mm thickness including snap fit type beading, concealed screws, fixtures, godrej or equivalent make mortice lock with handle on both sides, etc all complete. aluminium section shall be smooth, free of stains, straight, mitred & jointed mechanically wherever required. (glazing shall be paid separately) kg 210.0 0.2033993419 a907 providing and fixing fire proof steel doors (single or double shutter) with panic devices shall be 45mm thk flush design comprising of two outer sheets of 18 gauge steel sheets rigidly connected and reinforced inside with continuous vertical 20 gauge stiffeners, spot welded in position at not more than 150mm on centers including all fittings, vision panel of minimum 11mm thick inter layered fire resistant glass, shop painting with approved post office/signal red color fire resistant paint and mineral wool insulation (64 kg/cum density) complete and shall be fire proof as per is:3614, tac requirements and as per specification. minimum ratings shall be 2 hrs. sqm 25.0 0.4585331460 908 providing and fixing steel windows/ventilator with steel sections as per is:1038, is:1361 & is:7452 latest revision including all fittings, metal beadings, hold fasts, shop and final painting ,glazing etc. all complete. (glazing shall be paid separately) a openable type sqm 210.0 0.8983514138 b fixed type sqm 40.0 0.1125744231 a909 providing and fixing anodised aluminium work of indal, jindal, hindalco or other equivalent approved make for door frames, windows, ventillators, partitions, railing etc with extruded standard tubular and other sections(of minimum 2mm wall thickness) including all fittings & fixtures and accessories of approved make conforming to is733 and is1285, anodised and electro color dyed to required shade according to is 1868 (minimum anodic coating of grade ac15), fixed with rawl plugs, expansion fasteners, ss screws or with fixing clips, including necessary filling of gaps at junctions, at top, bottom and sides with required pvc/neoprene felt for bi metalic protection etc. including preperation of working drawings, aluminium cleat angle, aluminium snap on beading for glazing/panelling, stair case tread nosing, with all fittings and fixtures (like tower bolts, handles, door stopper with rubber shoes, l drops, stays, floor springs, hydraulic door closures etc.), cp brass/stailess steel screws, providing and fixing hinges/pivots, and making provision for fixing of fitting wherever required including cost of pvc/neoprene gasket, all complete as per drawing, specification and instructions of engineer in charge (glazing and panelling shall be paid seperately).weight of aluminium section only shall be measured. kg 1250.0 1.1283851494 911 providing and fixing of door closers as per specification ,of approved make & quality all complete of following type : a over head hydraulic door closures as per is 3564 each 25.0 0.0735455339 b floor mounted hydraulic door closers as per is 6315 each 1.0 0.0050533897 912 providing and fixing pressed steel frames fabricated from 16 gauge m.s sheet mortised, reinforced drilled and tapped for hinges and locks bolts strikes, hold fasts adjustable floor anchors, floor tiles/weather bars ,paintings etc all complete as per specifications. kg 1.0 0.0002446495 913 providing and fixing in position rolling shutter of hot rolled double dipped galvanised steel lath section of 18 swg tested mild steel strips at 75mm rolling centres interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation including wire springs, top cover, primer & shop coats of approved enamel paint etc, all complete as per is 6248 and specification of approved make of following types: the bottom lath shall be coupled to a lock plate fabricated from 3mm thick galvanised steel plate and securely rivetted with stiffening angles.(partly coiled and lath/full lath). a hand operated sqm 1.0 0.0046143168 b mechanically operated sqm 53.0 0.3504482846 c electrically operated sqm 1.0 0.0071158986 915 providing, fixing and fitting of glazing of first grade class in steel/aluminium/wooden frames, where ever required, cleaning after fixing including hardware, gaskets, clips, beadings etc. all complete. aa 6 mm thick ground glass sqm 10.0 0.0427634398 ad 6 mm thick laminated glass sqm 10.0 0.0319470147 ae 3mm thick polycarbonate sheet fire retardant and ultra violet resistant sqm 10.0 0.0323617847 ah 6 mm thick clear toughened glass sqm 318.0 1.2245955980 aah 6 mm thick wired glass sqm 10.0 0.0236305512 i two nos. 6 mm thick clear toughened float glass hermetically sealed and separated by 12 mm thick air gap for thermal insulation (only single elevation area to be measured) sqm 10.0 0.0596993432 ai two nos. 6 mm thick clear toughened float glass hermetically sealed and separated by 24 mm thick air gap for thermal insulation (only single elevation area to be measured) sqm 5.0 0.0358630272 e 6mm thick polycarbonate sheet multi (twin) wall fire retardant and ultra violet resistant with sealed open edges. sqm 5.0 0.0235981473 916 supplying and fixing weather stripping of approved make and quality to doors as per instructions of engineer in charge and specification complete. rm 5.0 0.0021354177 917 providing and fixing 12 mm thick bwp particle board, decorative veneer (prelaminated) on both sides, as panels in aluminium framed door shutter, fixed with necessary snap on beading etc. all complete (excluding aluminium works). sqm 5.0 0.0141880519 918 providing and fixing steel louvered window with ismc 100 frame all round including verticals with 18g pressed steel louvers, painting etc. all complete. sqm 5.0 0.0285899696 919 providing and fixing 1 mm thk. ms sheet sliding shutters with frame and diagonal braces of 50x50x6 angle iron, 3 mm ms gusset plates at junction and corners, 25 mm dia pulley, 50x50x6 angle and t iron guide at the top and bottom respectively including painting etc. all complete. sqm 5.0 0.0397093713 a920 providing and fixing of welded wire fabric of 1.6mm thick wire as per is: 4948 and 12mm x 30mm mesh size. in conveyor gallery windows. sqm 5.0 0.0245459617 a923 providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. (only weight of grill to be measured for payment). kg 5.0 0.0045138646 1000 brickwork brickwork: brickwork masonry including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, scaffolding etc. at all levels as per specification, drawings and as directed by engineer in charge for the following: 1001 providing brick work in cement mortar 1:6 (1 part cement 6 parts coarse sand) in walls, chambers etc. in thickness varying from 230mm to 460mm at all depths, places and positions below plinth including raking out joints, curing, scaffolding etc. complete excluding plastering and painting. a using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2 (including cost of cement for brick making) cum 125.0 0.8697128383 c using burnt clay bricks of class designation 7.5 of nominal dimension cum 1002 providing brick work in cement mortar 1:6 (1 cement 6 coarse sand) in walls, chambers etc. in thickness 230mm at all heights, places and position above plinth including raking out joints, curing, scaffolding etc complete excluding plastering and painting. a using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2 (including cost of cement for brick making) cum 450.0 3.8557088244 c using burnt clay bricks of class designation 7.5 of nominal dimension cum a1002 providing brick work in cement mortar 1:6 (1 cement 6 coarse sand) in walls, chambers etc. in thickness 345mm at all heights, places and position above plinth including raking out joints, curing, scaffolding etc complete excluding plastering and painting. d using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2(including cost of cement for brick making) cum 50.0 0.4284120916 1003 providing brick work in cement mortar 1:4 (1 cement 4 coarse sand) in partition walls, chambers etc. in thickness 115mm at all heights, places and position above or below plinth/graded level including providing two nos. 6 mm diameter ms bars at every third layer, raking out joints, curing, scaffolding etc complete excluding plastering and painting as per specification. a using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2(including cost of cement for brick making) sqm 23.0 0.0250449819 c using burnt clay bricks of class designation 7.5 of nominal dimension sqm 1005 breaking of existing brick work at all levels including plastering, removing the rubbish up to a distance of 500 m including transportation, loading, unloading etc. all complete as directed by the engineer. cum 10.0 0.0204258045 1006 providing and encasing of structural steel member with masonary work around flanges, webs etc. and filling the gap between steel and masonry by minimum 12mm thick mortar of 1:6. encased member shall be wrapped with chicken wire mesh with 50mm lap etc. complete as per specification. (chicken wire mesh to paid separately) cum 10.0 0.0744949685 1007 providing and laying 75 mm thick bed of dry brick aggregate including of excavation, disposal of surplus earth spreading of earth, ramming, watering etc. complete in all respects as directed by the engineer. sqm 10.0 0.0023897883 1008 making openings in existing brick wall or partition wall including making good the broken edges/surface with cement mortar 1:6 etc. complete. cum 20.0 0.0463051871 1009 supply and placing in position mild steel wire fabric of square mesh 25 mm size and wire diameter of 2 mm for encasing of steel sections in concrete including cutting, bending, fixing etc. complete. sqm 20.0 0.0116265228 1010 filling existing brick wall/ partition wall opening at all level including making good the broken edges/surface with cement mortar 1:6, painting, finishing to match with existing finishing, scaffolding/supporting at all level, removal of debris upto a lead of 1 km including loading, unloading, transportation etc. all complete. sqm 20.0 0.0247258034 1011 providing and filling brick bats in soak pits all complete. cum 25.0 0.0422044723 1100 damp proof course damp proof course: damp proof course including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, shuttering, centering, curing etc at all level as per specification, drawings and as directed by engineer in charge for the following: a1101 providing damp proof course of following thickness with m20 concrete (10mm and down graded aggregate) with 2% of approved admixture of water proofing compound all complete. two layers of hot bitumen coating 85/25 grade as per is:702 @ 1.7kg./sqm shall be applied one before & one after the dpc etc. all complete as per specification. b 50mm thick sqm 90.5 0.0705028068 1200 cement mortar plaster plastering: cement mortar plaster including making grooves wherever required including all labour, material (unless otherwise specified in boq/contract specification), scaffolding, curing etc at all level as per specification, drawings and as directed by engineer in charge for the following: a1201 providing 18mm thick plaster consisting first (base) layer of 12mm thick plaster in cement sand mortar 1:6 and second (finish) layer of 6mm thick plaster in cement sand mortar 1:4 including providing 3mmx3mm size grooves at junctions of two dissimilar materials all complete as per specification. sqm 1820.6 0.8358345506 1202 providing 12mm thick plaster inside the building/boundary wall in cement mortar 1:6 on walls finished to a smooth finish as per specification all complete. sqm 1770.6 0.5619534645 a1202 providing 12mm thick plaster inside the building/boundary wall in cement mortar 1:4 on walls finished to a smooth finish as per specification all complete. sqm 400.0 0.1264919023 1203 providing 12mm thick plaster in cement mortar 1:6 on walls with rough finish all complete. sqm 100.0 0.0302522902 1204 providing 6mm thick plaster on ceiling in cement mortar 1:4 finished to a smooth all complete. sqm 20.0 0.0061697044 1205 providing 12mm thick plaster in walls, drains/culverts with a paste of neat cement @ 1kg/sqm and rubbed smooth with trowel etc. all complete. sqm 10.0 0.0028612652 1207 forming groove of uniform size from 12x12 mm upto 25x15 mm in plastered surface as per approved pattern, using wooden battens nailed to the under layer, including removal of wooden battons, repair of the edges of plaster panel and finishing the groove etc. complete as per specification, drawing and the instructions of engineer in charge. rm 100.0 0.0059477376 1208 providing and laying encasement to box type steel beams at all levels with lath plaster 50 mm nominal thickness with cement plaster (1:4) over chicken wire mesh including all labour, materials, equipment, handling, transporting, mixing, placing, leveling, curing and cleaning, finishing the exposed surfaces etc including centering and shuttering all complete as per specification, drawing and instructions of enginner in charge (chicken wire mesh to be paid separately) sqm 20.0 0.0167803647 1209 ruled pointing in masonry in cement mortar 1:3 (1 cement and 3 fine sand) including raking out joints, curing etc. complete. sqm 10.0 0.0020900522 a1210 providing drip course in cement mortar (1:3) in parapet, chajjas, window/door heads, architectural facias, fins etc. all complete. rm 315.0 0.0210933251 1300 finishes to concrete / plastered surfaces finishes to concrete / plastered surfaces: finishes, painting to concrete, plastered surfaces including all labour, material (unless otherwise specified in boq/contract specification), equipment, surface preparation, scaffolding etc. at all level as per specification, drawings and as directed by engineer in charge for the following: 1301 two or more coats of white wash/ colour wash as per is 627 of approved brand and manufacture to give an even shade including a priming coat as per specifications. sqm 10.0 0.0006091935 1304 two or more coats of acrylic distemper of approved brand and manufacture to give an even shade including a priming coat with distemper primer complete. sqm 2000.0 0.2744287122 1305 providing and applying two or more coats of acrylic emulsion paint as per is 5411 of approved brand, shade and manufacture to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guideline. sqm 260.0 0.0527908297 1306 providing and applying 2 or more coats of acid/alkali resistant paint of approved brand and colour to floors, walls and ceiling including preparation of surface to receive paint, providing and applying bitumen primer confirming to is 158 complete all as per manufacturers recommendations and as approved by engineer, at all heights above or below grade level, complete as per specifications. sqm 100.0 0.0642747753 1307 providing and applying two coats of epoxy coating with suitable pigments of approved shade as per specification and direction of engineer. the epoxy paint shall be a two pack material and shall be resistant to water, oil, splash, spillage & acidic environment. the epoxy paint coating shall be of minimum 150 micron thickness over epoxy primer. sqm 10.0 0.0038512047 1308 providing and applying 2 or more coats of chlorinated rubber paint of approved brand and colour to floors, walls and ceiling including preparation of surface to receive paint, providing and applying chlorinated rubber zinc phosphate primer confirming to is 158 complete all as per manufacturers recommendations and as approved by engineer, at all heights above or below grade level, inclusive of intermediate coat of titanium dioxide / micaceous iron oxide complete as per specifications. sqm 120.0 0.0398892130 1309 two or more coats of fire resistant transparent paint (@3.5 litre per sqm per coat) as per is 162 on all woodwork over french polish as per is 348 or flat oil paint as per is 137 of approved grade and manufacture to give an even shade as per specifications. french polish payment will be made seperately. sqm 5.0 0.0024837597 1314 providing and applying resin bonded granular textured finish, for external applications shall consist of crushed stone/quartz chips of .5 mm to 2.5 mm size and of approved natural color/shade and bonded with synthetic resins, adhesives and additives altogether in a single pack mix, applied on cured and dried plaster surface with a dry film nominal thickness of 2.5 mm. the final finish shall have uv resistance, fungus, bacterial resistance properties all complete with grooves filled with poly sulfide sealant of matching color and shade as per specification/drawing/approval of engineer in charge. sqm 153.0 0.1761735769 1316 providing and applying 2 mm thick plaster of paris punning on walls including preparation of surface, staging, etc. to achieve a smooth even surface all complete as per specification and as directed by engineer. sqm 10.0 0.0015035414 1317 providing and applying 2 mm thick white cement punning on walls including preparation of surface, staging, etc to achieve a smooth even surface all complete as per specification and as directed by engineer. sqm 10.0 0.0016266763 a1317 providing and applying 2 mm thick polymer based water resistant putty on walls including preparation of surface, staging, etc to achieve a smooth even surface all complete as per specification and as directed by engineer. sqm 10.0 0.0018356815 1319 providing and applying two or more coats of acrylic based weather coat paint of approved brand and manufacture and required shade over one coat of primer after necessary cleaning/ washing, preparing the surface using coir brush/ wire brush, sand paper, including filling of cracks with putty wherever required etc. all complete to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guidelines. the final finished coating shall be fungus resistant, uv resistant, water repellant and extremely durable with color fastness as per specification. sqm 10.0 0.0028061786 a1319 providing and applying two or more coats of acrylic smooth exterior paint with silicon additives of approved brand and manufacture and required shade over suitable primer after necessary cleaning/ washing, preparing the surface using coir brush/ wire brush, sand paper, including filling of cracks with putty wherever required etc. all complete to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guidelines. the final finished coating shall be fungus resistant, uv resistant, water repellant and extremely durable with color fastness as per specification. sqm 2000.0 0.5892002921 1320 providing and applying acid alkali and oil resistant high build, solvent free, self smoothing, seamless epoxy based amine cured floor finish 150 microns over primer on c.c. flooring. sqm 10.0 0.0064078732 1400 flooring and skirting flooring and skirting: flooring and skirting at all level including base layer, labour, material (unless otherwise specified in boq/contract specification), equipments, transportation, handling, curing, polishing etc. at all level as per specification, drawings and as directed by engineer in charge for the following: (bhel will not supply rmc for this item) 1401 providing and laying 50 mm thick heavy duty cement concrete in flooring with metallic hardener pigmented topping 12mm thick uniform graded treated iron particles in flooring. under layer of 38mm thick cement concrete mix 1:2:4 (1 cement: 2 sand : 4 stone aggregates 12.5 mm well graded) and top layer of 12mm thick metallic concrete of mix 1:2 (1 cement hardner mix with approved quality metallic hardening compound :2 stone aggregate 6mm nominal size) by volume including cement slurry, rounding off edges, aluminium strips etc. all complete for following (quoted item rate shall be inclusive of providing glass joint strips): sqm 505.0 0.4248168778 a1401 providing and laying 50 mm thick heavy duty cement concrete in flooring with metallic hardener pigmented topping 12mm thick uniform graded treated iron paricles in flooring. under layer of 38mm thick m20 grade cement concrete mix (with stone chips of size 12.5mm well graded) and top layer of 12mm thick metallic concrete of mix 1:2 (1 cement hardner mix with approved quality metallic hardening compound :2 stone aggregate 6mm nominal size) by volume including cement slurry, rounding off edges, aluminium strips etc. all complete for following (quoted item rate shall be inclusive of providing glass joint strips): sqm 1350.0 1.4467875874 1402 providing and laying 25 mm thick heavy duty cement concrete mix 1:2:4 (1 cement: 2 sand : 4 stone aggregates ) flooring with metallic hardener pigmented topping of 10 mm thick uniform graded treated iron particles in skirting and dado. under layer of 15mm thick cement concrete mix 1:2:4 (1 cement: 2 sand : 4 stone aggregates 12.5 mm well graded) and top layer of 10mm thick metallic concrete of mix 1:2 (1 cement hardner mix with approved quality metallic hardening compound :2 stone aggregate 6mm nominal size) by volume including cement slurry, rounding off edges, aluminium strips etc. all complete as per specification. (quoted item rate shall be inclusive of providing glass joint strips). sqm 150.0 0.1203610826 a1404 providing and laying interlocking m35 grade concrete blocks in paving with approved colour and pattern and should be laid on the subbase and bedding of sand minimum 50mm thick as per specifications and recommendations of manufacturer.(inclusive of cost of cement for paver manufacturing). b 80mm sqm 10.0 0.0156705308 1406 providing and laying polished kota stone 18mm to 20mm thk in flooring. under bed shall average 30mm thk of 1 cement : 2 sand : 4 stone aggregates by volume and brought to proper level. the kota stone slabs/tiles laid over under bed, pressed and tapped down with wooden mallet to the proper level, lifted and pressed again with thick cement slurry @4.4kg/sqm spread over the surface with fine joint finished including pigments, curing, grinding, granite polishing etc. all complete. sqm 5.0 0.0128238473 1412 providing and laying 18 20mm thick polished granite stone of approved color and texture in flooring with brass/ stainless steel strips. under bed shall average 30 mm thick of 1 cement : 2 sand : 4 stone aggregate by volume and brought to proper level. the granite stone slabs/tiles laid over under bed, pressed and tapped down with wooden mallet to the proper level, lifted and pressed again with thick cement slurry @3.3kg/sqm spread over the surface with fine joint finished including pigments, curing, grinding, granite polishing etc. all complete. sqm 220.0 2.2619662657 a1416 providing and laying vitrified ceramic tiles of mirror polished variety of size 600x600 from reputed / approved manufacturer, complete including underbed of cement mortar 1:3 minimum 18mm thick underbed for flooring and 12mm thick underbed for dado/skirting with neat cement slurry @3.3kg/sqm , 3 mm groove joint pointed neatly with 3x4mm stainless epoxy grout sp 100 of laticrete or approved equivalent etc. all complete for following b 10mm thick tiles in flooring sqm 200.0 0.5835036847 1417 providing and laying vitrified ceramic tiles of matt finish of size 600x600mm from reputed / approved manufacturercomplete including underbed of cement mortar 1:3 minimum 20mm thick underbed for flooring and 12mm thick underbed for dado/skirting with neat cement slurry @3.3kg/sqm etc. all complete for following b 10mm thick tiles in flooring sqm 10.0 0.0254613721 d 10mm thick tiles in skirting and dado upto specific height sqm 50.0 0.1280067851 a1419 providing and laying granite stone slab of 18mm thickness single piece for wash basin / sink slab /facia of black or approved colour with cutting,making corners,moulding and opening etc. all complete. sqm 5.0 0.0580013784 a1421 providing and laying heavy duty dust pressed (grade 5) ceramic tiles (matt finish) of size 300x300mm(approved size) and 7mm thick of reputed / approved manufacturer (kajaria,jhonson,spartek or equivalent) of approved finish, shade and colour. the tiles shall be scratch resistance of minimum 5 on mohrs scale and shall have a bending strength of 350 kg./sqm,with under bed shall average 43mm thk of 1 cement : 2 sand : 4 stone aggregates by volume and brought to proper level including cement mortar with neat cement slurry @3.3kg/sqm all complete. sqm 20.0 0.0534939945 a1422 providing & fixing 12mm thick acid / alkali resistant (chemical resistant) tiles confirming to is:4457 in flooring/dado and shall be laid over bitumastic lining of min 12mm thick (to be laid in layers of 6mm each). the tiles shall be applied with 6mm thick potassium silicate bedding mortar as per is:4441, 4443 & 4832, 6mm ythick pointing of joints of tiles with acid/alkali resistant epoxt/furane mortar up to a depth of 20mm and bituminastic end sealing and including preparation of surface, application of bitumen primer, curing etc. all complete as per specification. the tiles should be abrasion resistant & durable. sqm 120.0 0.3149190177 a1422 providing & fixing acid / alkali resistant (chemical resistant) tiles confirming to is:4457 in flooring/dado and shall be laid over bitumastic lining of min 12mm thick (to be laid in layers of 6mm each). the tiles shall be applied with 6mm thick potassium silicate bedding mortar as per is:4441, 4443 & 4832, 6mm thick pointing of joints of tiles with acid/alkali resistant epoxy/furane mortar up to a depth of 20mm and bituminastic end sealing and including preparation of surface, application of bitumen primer, curing etc. all complete as per specification. the tiles should be abrasion resistant & durable. a 12mm thick acid / alkali resistant (chemical resistant) tiles in dado sqm 70.0 0.1837026253 b 20mm thick acid / alkali resistant (chemical resistant) tiles in flooring sqm 5.0 0.0273375585 1428 providing and laying 3mm thick antistatic pvc flooring / skirting of approved shade,as per is:3462 and laying as per is:5318 all complete. sqm 5.0 0.0030589291 1429 providing and fixing removable type flooring system consisting of fire resistant particle board of size 600x600x35 mm with 0.05 mm thick aluminium foil lining at bottom and with 2 mm thick anti static pvc topping including proprietary floor supporting system complete as per specification. sqm 5.0 0.0345231255 1600 false ceiling false ceiling: false ceiling including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, suspension system etc at all level as per specification, drawings and as directed by engineer in charge for the following: a1602 providing, fixing and laying light weight mineral fibre tile false ceiling of minimum thickness 15 mm and exposed surface semi perforated with depth of perforation as 4 mm and humid resistance of 95% rh and fire performance of class 0/1 as per bs 476 with metal suspension grid system with galvanized tees of section 24 x 38 mm for main runners of approved colour and make as per specification including 50mm thick mineral wool insulation (density48kg/cum) as per is:8183 backed with 0.05 mm thick aluminium foil & 24 g x 25 mm mesh wire netting and shall be fixed to ceiling with 24 g wire ties and suitable fixing arrangements. additional hangers and height adjustment clips shall be provided for return air grills, light fixtures. a.c. ducts etc. suitable m.s. channel (minimum mc 75 @ 1.2m) grid shall also be provided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, ac ducts etc. complete with cut outs etc. the size of tiles shall be 600 x 600 mm or 600 x 1200 mm. required ms channel shall be measured & paid extra under respective item unit rate. sqm 250.0 0.7625417672 a1603 providing and fixing permanently colour coated aluminium false ceiling of approved colour and luxalon 84 c or approved equivalent with corrosion resistant aluminium alloy panels of minimum thickness 0.5mm including 50mm thick mineral wool insulation(density 48 kg/cum) conforming to is:8183 backed with 0.05 mm thick aluminium foil & 24 g x 25 mm mesh wire netting and shall be fixed to ceiling with 24 g wire ties and suitable fixing arrangements. additional hangers and height adjustment clips shall be provided for return air grills, light fixtures, a.c. ducts etc all complete. suitable m.s. channel grid with minimum mc 75 shall also be provided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, ac ducts etc. ( materials for structural platform grid made up of ms channels/ beams / angles shall be supplied by bhel and shall be paid under st no a2301) sqm 10.0 0.0391682260 a1604 providing, fixing and laying permanently colour coated aluminium false ceiling of approved colour with stove enamel finsih of approved make in linear and square type with corrosion resistance aluminium alloys panels of minimum thickness 0.5mm including 50mm thick mineral wool insulation (as per is:8183)backed with 0.05 mm thick aluminium foil & 24 g x 25 mm mesh wire netting and shall be fixed to ceiling with 24 g wire ties and suitable fixing arrangements.. additional hangers and height adjustment clips shall be provided for return air grills, light fixtures etc. suitable m.s. channel (minimum mc 75) grid 1200 mm c/c maximum shall also be provided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, ac ducts etc. the work to be complete as per specifications, drawings and direction of engineer. (structural steel works for platform for movement is separately payable under relevant items of boq) sqm 10.0 0.0366828461 1700 rain water down take pipes rain water down take pipes: rain water down take pipes at all level including all labour, material (unless otherwise specified in boq/contract specification), transportation, 2 coats of approved paint over one primary coat, fixtures, accessories etc as per specification, drawings and as directed by engineer in charge for the following: a1704 providing and fixing galvanised ms down take pipes conforming to is: 1239/is: 3589 of 150 mm dia medium quality as per is:1239(part i) all complete as per specification. (galvanising shall be as per is: 4736. the minimum mass of zinc coating shall not be less than 400 gms/sq.m. as per is:6745. the zinc coating shall be smooth and shall be subjected to testing as per is: 2633, for uniformity of coating. the zinc coating shall be free from all defects as per is: 2629. all rain water down comers shall be provided with roof drain heads and complete with shoes bends, junctions, sockets, adapters, brackets and finished with anticorrosive painting over a coat or primer. downcomers shall be provided with 45 x 45 cm size khurras having minimum thickness of 30 mm with m 15 concrete over pvc sheet of 1mx1mx400micron and finished with 12 mm thick cement sand plaster 1:3.the rainwater down comers shall be provided with suitable c.i. grating at inlet point etc. all complete as specification. rm 260.0 0.9570656782 1705 providing and fixing upvc down take pipes of 110mm diameter class 3 as per is:4985 all complete. rm 10.0 0.0076651449 1706 providing and fixing upvc down take pipes of 160mm diameter class 3 as per is:4985 all complete. rm 10.0 0.0117658597 1710 providing and fixing galvanised erw steel down take pipes of medium duty as per specification of following diameters. c 273mm od and 4mm thick rm 10.0 0.0677646764 1800 miscellaneous works miscellaneous: miscellaneous works including all labour, material (unless otherwise specified in boq/contract specification), equipment etc. at all level unless otherwise specified as per specification, drawings and as directed by engineer in charge for the following: a1801 providing and filling in trenches, plinths, area paving and other underground structures with graded stone aggregate of size range 63 mm to 45 mm (complying irc specification) in layers not exceeding 200 mm compacted thickness including breaking of stone boulders to required sizes, filling the interstices with selected moorum/non expansive soil sand and compacting to 85 % of original volume of stone stack for all lifts etc. all complete. payment shall be made for the measurement of the volume of the compacted fill. cum 2375.6 6.7817494764 b1801 providing and filling in trenches, plinths, area paving and other underground structures with graded stone aggregate of size range 63 mm to 45 mm in layers not exceeding 200 mm compacted thickness including breaking of stone boulders to required sizes, filling the interstices with selected moorum and compacting to 90 % of original volume of stone stack for all lifts etc. all complete. payment shall be made for the measurement of the volume of the compacted fill. cum 5.0 0.0149868083 1802 supply and laying approved quality stone aggregate 40mm size in transformer yards. cum 10.0 0.0412923023 1804 providing and fixing weep holes in retaining wall, drains, etc consisting of 100 mm dia hdpe pipe sleeves with single side covering for the pipe mouth with galvanised welded wire fabric of 20 mm sq. opening all complete. each 10.0 0.0036114157 1807 anti termite chemical treatment of soil with chlorpyriphos/lindane e.c. 20% with 1% concentration conforming to is:8944 and as per is 6313 all complete. (plinth area of building at ground floor only shall be measured for payment). sqm 1298.0 0.3859662101 1808 laying of earthing mats/rods including risers, transportation from yard stores, loading, unloading, cutting to length, welding, protective painting of joints etc. all complete. (excavation & back filling shall be paid separately under respective item of earth work. earthing mats/rods shall be supplied by bhel free of cost) mt 10.0 0.1613860526 1809 construction of below ground earthing system test pits as per drawing / sketches including concreting, reinforcement, formwork, providing & fixing gi strip etc as per drawing and specification (excavation & backfilling only will be paid under applicable boq items). each 10.0 0.1761492739 1810 construction of below ground earthing system test links as per drawing/ sketches including concreting, reinforcement, formwork, providing & fixing gi strip etc as per drawing & specification (excavation & backfilling only will be paid under applicable boq items. each 20.0 0.2639800715 1811 construction of below ground earthing system earth electrodes as per drawing and specification. ( excavation and backfilling only will be paid under applicable boq items) each 20.0 0.0202637850 1812 construction of below ground earthing system earth connection and riser pig tails as per drawing and specification. ( excavation and backfilling only will be paid under applicable boq items& steel shall be supplied by bhel free of cost.) each 20.0 0.0135091900 1813 providing earthing pit as per drawing with charcoal & salt, gi pipes, gi earth electrodes, gi wire, gi strips, brick chamber with covers including associated earthwork etc. all complete. each 20.0 1.1049830457 1814 construction of below ground earthing system test pits as per drawing/ sketches including brickwork, plaster, concreting, reinforcement, formwork, providing & fixing gi strips/pipes, gi wires, covers etc as per drawing & specification including associated earthwork. each 20.0 0.6441864866 1815 providing and fixing gi rungs in concrete/brick walls having zinc coating of minimum 900 g/sqm etc. all complete. kg 100.0 0.0161420077 1818 fire proofing of steel structures with vermiculite cementious coating including supply of all materials for vermiculite materials, reinforcement mesh (3mm thick wire, 50x50 size mesh) , nuts, tie wires, weldings, suface preparation, curing, staging, compatible paintings etc. all complete. cum 5.0 0.8008156453 1819 supply & fixing expanded metal steel sheet conforming to is:412. size of mesh shall be 10mmx40mm with strands of 2.5mm width and 1mm thickness to the structural steel for facilitating fireproofing works. sqm 10.0 0.0054584386 1821 sprinkling of water by water tanker fitted with perforated gi pipe (portable tanker minimum 3000 litre capacity) for roads and miscellaneous area within plant boundary, for dust supression and reduction of suspended material at site for day to day work, as directed by bhel site engineer (water for this purpose shall be provided by bhel free of cost and utilisation of machine will be in terms of tank hour put in actual use for water sprinkling). tank hr 1822 providing & filling bentonite powder (sodium base) mixed with water in electronic earthing pit as per drawing & direction below ground level including all materials, transportation, labour, incidental etc all complete as per specification. cum 2.0 0.0320312648 1823 providing and laying cinder filling in the toilets,roads,etc complete as directed by engineer in charge. cum 1.0 0.0038042190 1824 disposal of scrap steel, scrap wood, broken packing crates, cable scrap, debris and other civil waste, electrical waste materials etc. from project site to a designated place within 5 km range, with all manpower t & p etc. including loading and unloading as and when directed by bhel. a steel scrap / metal scrap mt 2.0 0.0022893362 b debris & other waste materials. cum 2.0 0.0004325922 1832 providing and fixing sliding layer of bitumen paper or craft paper over the screed layer for water retaining structures to destroy the bond between the screed and the base slab concrete of the water retaining structure etc all complete. sqm a1839 providing bore wells in ground with perforated/non perforated pvc pipe of standard approved make for rain water harvesting by means of mechanical equipment including pipe, drilling inside earth, weathered rock, sandstone, shale etc. upto required depth at locations shown in drawing etc all complete. depth of borewell shall vary from 6m to 15m. payment shall be made cumulative diamterwise as per actual length of bore well and diameter as mentioned below. (a) 200 mm diamter rm 1.0 0.0007436697 (b) 300 mm diamter rm 1.0 0.0009299922 a1840 supply & packing uniformly 6mm to 3mm size gravel in the bore hole surrounding the perforated pvc pipe. cum 1.0 0.0052332314 a1841 supply & packing uniformly downgraded 40mm size gravel at all depth in the pit/well dug for rain water harvesting. cum 1.0 0.0052332314 a1842 supply & packing uniformly downgraded 40mm size pebbles at all depth in the pit/well dug for rain water harvesting. cum 1.0 0.0052332314 a1843 supply & laying coarse sand layer at all depth in the pit/well dug for rain water harvesting. cum 1.0 0.0043210614 a1844 supply and fixing of bar screen of 5 mm square m. s. bar at inlet point of rain water collecting tanks with 50 mm x 50 mm opening etc all complete sqm 1.0 0.0002171062 a1845 supply & fixing 150mm dia perforated pvc pipe isi mark 6 kg/ cm2 with air vent at top as per the drawing & specification complete. rm 1.0 0.0014338730 a1846 providing & fixing 150 dia pvc pipe isi mark 6 kg/cm2 as per specification. rm 1.0 0.0014338730 a1847 supply & fixing netlon jali/ pvt net in the well dug for rain water sqm 1.0 0.0002511303 a1849 providing 50mm thick premix carpet surfacing laid to slope in two layers 30mm and 20mm respectively with 12mm downgraded stone chips mixed with 80/100 grade bitumen @ 52 kg/cu.m including compaction etc. all complete as per specification. sqm 400.0 0.5594535029 a1850 providing 50mm thick anti corrosive layer laid to required slope consisting of clean & well graded coarse sand mixed with a90 grade bitumen for softening point upto 45 degree celcius or a65 grade bitumen for softening point above 45 degree celcius as per is: 73 or its equivalent quality 8 to 10% by volume and rolled or compacted all complete as per specification. sqm 400.0 0.4763958013 2000 fencing and gates fencing and gates: fencing and gates including all labour, material (unless otherwise specified in boq/contract specification), equipment etc at all level as per specification, drawings and as directed by engineer in charge for the following: 2001 supplying and erecting in position 2.4 m high pvc coated gavanised chain linked fencing of minimum 8 gauge (including pvc coating ) of mesh size 75mm x 75mm. the diameter of the hot dip galvanised steel wire for chain link fencing excluding pvc coating shall not be less than 12 gauge. gi barbed wire fencing of height of 600 mm confirming to is 298 at top of chain link fencing shall be provided with 4 strands of barbed wire hot dip galvanised wire of 12g comprising of 2 ply of wires with barbs of 16g spaced at 100mm. cost to include for gi hook bolts, rings & washers, hot dip galvanised tension wires, 25x6 mm gi flat stretcher bar at end posts, rm 10.0 0.0418658515 accessories etc. all complete. (structural post shall be paid separately under item 2007) 2003 supplying and erecting in position 2.4 m high pvc coated gavanised chain linked fencing of minimum 8 gauge (including pvc coating ) of mesh size 75mm x 75mm. the diameter of the hot dip galvanised steel wire for chain link fencing excluding pvc coating shall not be less than 12 gauge. concertina of height of 600 mm at top of chain link fencing shall be provided with all accessories. concertinal shall be from tensile serrated galvanised wire (htsw) made with wire diameter of 2.5 mm which will be stretched to 6m and attached on two strands of galvanised htssw (high tensile spring steel wire) of 2.5mm dia by means of clips at 1m interval. these two htssw strands will be attached to the fence posts/ angles with 12 mm security fasteners. cost to include for gi hook bolts, rings & washers, hot dip galvanised tension wires, 25x6 mm gi flat stretcher bar at end posts etc. all complete. (structural post shall be paid separately under st no. 2007) rm 10.0 0.0390386103 2004 supplying and erecting in position 2.4 m high gavanised chain linked fencing conforming to is 2761 of 10g hot dip galvanised steel wires woven in the form of zigzag mesh giving an opening size of 50 mm square. concertina of height of 600 mm at top of chain link fencing shall be provided with all accessories. concertinal shall be from tensile serrated galvanised wire (htsw) made with wire diameter of 2.5 mm which will be stretched to 6m and attached on two strands of galvanised htssw (high tensile spring steel wire) of 2.5mm dia by means of clips at 1m interval. these two htssw strands will be attached to the fence posts/ angles with 12 mm security fasteners. cost to include for gi hook bolts, rings & washers, hot dip galvanised tension wires, 25x6 mm gi flat stretcher bar at end posts etc. all complete. (structural post shall be paid separately under st no. 2007) rm 1.0 0.0051376399 2005 supplying and fixing 600mm high g.i. barbed wire fencing on top of boundary wall consisting of min. 6 nos. strands of barbed wire hot dip galvanised wire of 12g comprising of 2 ply with barbs of 16g spaced at 100mm including gi clips, anchors, accessories etc. all complete. (structural post shall be paid separately under st no. 2007/ 2008 as the case may be) measurement shall be for per running meter of fencing. rm 1.0 0.0001134137 2006 supplying and fixing 600mm high concertina on top of boundary wall including gi tension wires, clips, anchors, accessories etc. all complete. concertinal shall be from tensile serrated galvanised wire (htsw) made with wire diameter of 2.5 mm which will be stretched to 6m and attached on two strands of galvanised htssw (high tensile spring steel wire) of 2.5mm dia by means of clips at 1m interval. these two htssw strands will be attached to the fence posts/ angles with 12 mm security fasteners. (structural post shall be separately under st no. 2007) rm 1.0 0.0004001883 2007 supply and fixing of hot dip galvanised mild steel posts for fencing. rate of zinc coating shall not be less than 710 g/m2 on steel posts. mt 1.0 0.1434764117 2008 supply, fabrication and fixing of mild steel posts for fencing including painting etc all complete. mt 1.0 0.1353284485 a2008 supply, fabrication and fixing of pre cast rcc of minimum m20 grade 3m high fence post including making arrangements for fixing of chain link fencing (covered in item no. 2001 above), painting etc. all complete as per specification. each 1.0 0.0017514313 2009 supply, fabrication and installing in position and testing galvanised ms gates out of channels, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, ms aldrops with locking arrangement, tempered steel pivot, guide track of ms tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete. mt 1.0 0.1603944930 a2009 supply, fabrication and installing in position and testing steel gates, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, aldrops with locking arrangement, tempered steel pivot, guide track tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete as per specification. mt 1.0 0.1603944930 2010 supply, fabrication and installing in position and testing ms gates out of channels, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, ms aldrops with locking arrangement, tempered steel pivot, guide track of ms tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete. mt 1.0 0.1531700413 2100 water supply water supply: water supply work including men, material (unless otherwise specified in boq/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer in charge for the following: 2101 providing and fixing in position tested heavy duty type chromium plated (cp) brass long neck bib cocks including sockets, union, nuts etc all complete 15mm nominal bore. each 20.0 0.0227281023 2103 providing and fixing in position heavy duty brass full way valve with wheel of approved quality including all specials etc all complete for following sizes: a 25mm nominal bore. each 20.0 0.0184783296 b 50mm nominal bore. each 20.0 0.0327522518 2104 providing and fixing gi pipes class b medium class conforming to is:1239 pipes shall be concealed and painted with anticorrsive paint, complete for internal works with gi sockets, unions, elbows, tees, nipples etc and clamps including cutting and making good the walls etc all complete for following sizes: a 15 mm nominal bore. rm 150.0 0.0968569066 b 20 mm nominal bore. rm 75.0 0.0548014923 c 25 mm nominal bore. rm 55.0 0.0484811097 d 50 mm nominal bore. rm 10.0 0.0129567033 2105 providing and fixing gi pipes class b complete for external work with gi sockets, unions, elbows, tees, nipples etc including trenching & refilling, anti corrosive paint etc all complete for following sizes: a 15 mm nominal bore. rm 20.0 0.0101100199 b 20 mm nominal bore. rm 40.0 0.0236192099 c 25 mm nominal bore. rm 80.0 0.0593023953 d 50 mm nominal bore. rm 50.0 0.0577745510 a2106 providing and fixing wall to wall mirror of height 450mm & 6 mm thk float glass from reputed mirror manufacturer. mirror shall be mounted with glass adjustable revolving cp brackets with cp screws etc all complete. each 4.0 0.0089126954 a2108 providing and fixing 20 mm diameter stainless steel towel rails (600mm x 20mm) all complete. each 4.0 0.0053093806 2110 providing and fixing c.p. soap holder mounted with c.p. screws etc all complete. each 4.0 0.0031610014 2111 providing and fixing stainless steel / c.p. liquid soap dispenser. dispenser shall be round and easily revolving with removable threaded nozzle and mounted on c.p. brackets etc all complete. each 4.0 0.0047487930 2112 providing and fixing glazed vitreous wall mounted paper holder with suitable cover cum cutter fitted with cp screws etc. sll complete. each 2.0 0.0010920118 2113 providing and fixing chromium plated brass shower rose 100mm dia with 15 or 20 mm inlet dia all complete. each a2114 providing & fixing in position high density polyethylene (cylindrical/vertical) molded seamless type tank of syntex or approved equivalent including making all necessary inlet & outlet pipes, fixture, ball cocks, valves etc all complete for following capacities. gi pipes shall be paid separately under st no. 2105. a 500 litres capacity each 2.0 0.0115471333 b 1000 litres capacity each 4.0 0.0461950138 2116 providing and fixing glass shelves 600mmx127mmx4 mm with chromium plated brackets all complete. each 1.0 0.0002527505 2117 providing and fixing metal storing cabinets all complete. each 1.0 0.0037604737 2118 providing minimum 600 mm long porcelain tray etc all complete.. each 1.0 0.0020058020 2119 providing and fixing recessed porcelain soap tray in shower area etc all complete. each 6.0 0.0037604737 2120 providing and fixing grab bars, barrier free access and appropriate fittings and fixtures for toilets for handicapped etc. all complete. each 6.0 0.0150467555 a2121 providing and fixing electric operated hand dryer with photo voltaic control including fittings, cutting and making good the wall where required etc. all complete. each 1.0 0.0362113692 2200 sanitary works sanitary: sanitary work including all labour, material (unless otherwise specified in boq/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer in charge for the following: a2201 supply and fixing glazed vitreous china wash basin of (oval shape) approved make (with photovoltaic control) conforming to is:2556 part 4 of oval shape with r.s. or c.i. brackets painted white, 15mm chromium plated brass hot & cold faucets with nylon washers, chromium plated brass chain with rubber plug, 32mm chromium plated brass bottle trap and waste of standard pattern, 32mm dia chromium plated brass trap unions, plastic connection pipe with chromium plated nuts, fittings, cutting and making good the walls where required etc all complete. a white each 4.0 0.0869607526 b colored each 1.0 0.0223554574 2202 providing and fixing approved vitreous china laboratory sink of size 600x400x200mm conforming to is:2556 (part 5) with r.s. or c.i. brackets, chromium plated brass chain with rubber plug 40mm, 40mm cp brass waste and 40mm cp brass trap with necessaary union complete including painting the fittings, cutting and making good the wall where required etc. all complete. each 1.0 0.0099593417 a2203 providing and fixing stainless steel kitchen sink of size 600x400x200mm conforming to is: 13983 including all fittings etc. all complete. each 1.0 0.0099755436 2204 providing and fixing colour glazed vitreous china european type water closet conforming to is:2556 with siphon, open front solid plastic seat and plastic cover, low level 12.5 litre pvc flushing cistern (same colour as wc) with valveless fittings, necessary c.p connections etc all complete. b wall mounted each 3.0 0.0654639988 a2204 providing and fixing colour glazed vitreous china european type water closet conforming to is:2556 with siphon, open front solid plastic seat, flush valve and plastic cover, low level 12.5 litre pvc flushing cistern (same colour as wc) with valveless fittings, necessary c.p connections etc all complete. b wall mounted each 3.0 0.0654639988 2205 providing and fixing colour glazed vitreous indian type orissa pattern (580x440mm) water closet conforming to is:2556 part 3 with all fittings including foot rests, low level 12.5 litre pvc flushing cistern with valveless fittings, necessary c.p connections etc all complete. each 3.0 0.0322904961 a2206 providing and fixing white flat back glazed vitreous china lipped urinals of size 440x265x355 mm with photo voltaic control flushing system as per is:2556 (part 6, section 1) with flush pipes, lead pipes, gratings, traps and necessary c.p. fittings,with provision of squatting urinal for ladies toilet etc. all complete. each 3.0 0.0408597101 2207 supply, laying and jointing upvc pipes of class 3 as per is:4985 including bends, branches and all other necessary fittings, m.s holder bats/clamps, cutting and making good the walls and floors, jointing, testing etc all complete for following. a 75mm dia pipes rm 20.0 0.0098556492 b 110mm dia pipes rm 20.0 0.0140616767 c 160mm dia pipes rm 20.0 0.0192009368 d 200mm dia pipes rm 20.0 0.0233227141 a2207 supply, laying and jointing cpvc pipes as per is:15778 including bends, branches and all other necessary fittings, m.s holder bats/clamps, cutting and making good the walls and floors, jointing, testing etc all complete for following. a 75mm dia pipes rm 400.0 0.2069702527 b 110mm dia pipes rm 40.0 0.0295280628 c 160mm dia pipes rm 40.0 0.0403234254 d 200mm dia pipes rm 60.0 0.0734645241 2208 providing, laying light duty non pressure np3 class rcc pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc all complete for following. a 200mm dia rm 20.0 0.032455756 b 300mm dia rm 200.0 0.466988946 c 450mm dia rm 45.0 0.187834124 d 600mm dia rm 65.0 0.352321231 2209 providing, laying light duty non pressure np2 class rcc pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc complete for following. a 150mm dia rm 90.0 0.087662297 b 250mm dia rm 70.0 0.103164328 c 300mm dia rm 10.0 0.016624826 d 450mm dia rm 10.0 0.023219022 2210 providing, laying light duty non pressure np3 class rcc pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc complete for following. a 150mm dia rm 20.0 0.023381041 b 250mm dia rm 80.0 0.142804031 c 400mm dia rm 40.0 0.130576415 2211 providing and fixing c.i manhole heavy duty cover of size 600mmx450mm including frame from reputed manufacture etc. all complete. each 2.0 0.044785444 2212 providing and fixing circular heavy duty c.i. manhole cover of 600 mm dia with frame etc. all complete. each 2.0 0.046846332 2213 providing and fixing square mouth s.w gully trap grade a complete with ci grating, brick masonry chamber(clay brickwork in 1:6 mortar, 12mm plaster in 1:6 mortar & 1:2:4 cement concrete) and water tight ci cover with 300x300mm (inside). the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72 kg etc all complete for following sizes: a 100x100mm p or s type. each 10.0 0.030608733 b 150x100mm p or s type. each 10.0 0.031754211 c 150x150mm p or s type. each 10.0 0.034155341 2214 providing and fixing c.i. floor traps size 100 mm inlet and 100 mm outlet sand cast iron s&s as per is: 1729 with c.p jalli all complete. each 10.0 0.020694757 2215 providing and fixing 100mm heavy duty upvc floor traps with 100 mm inlet and 100 mm outlet & c.p jalli all complete. each 10.0 0.019986732 2216 providing and installing approved brand single tap water cooler of 80 l cooling capacity all complete. each 5.0 0.350769083 2217 providing and installing approved brand single tap water cooler of 150 l cooling capacity all complete. each 5.0 0.43751597 2218 providing and fixing white viterous urinal partitions of size 675x325x85mm all complete. each 10.0 0.026125652 2219 providing and fixing eye and face drinking water fountain (combined unit with receptacle conforming to is: 10592) all complete as per specification. each 4.0 0.20023186 2221 providing, laying spun ci pipes with conforming to is 1536 complete for following.(excavation,backfilling,concrete to be paid seperately) c 150mm dia rm 150.0 0.996293851 d 200mm dia rm 100.0 1.018066038 f 300mm dia rm 70.0 1.081088403 2400 road works road works: road works including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation etc. as per specification drawing, relevant irc & is codes and as directed by the engineer in charge for the following: 2401 preparation of sub grade by excavating earth to required depth for all types of soil/ rock, dressing to camber and consolidating the base including making good the undulation etc and disposal of surplus earth within a lead upto 1 km etc. all complete. cum 2325.0 0.325954169 2402 supplying and filling with selected good earth of approved quality in layers not exceeding 300 mm loose thickness using borrowed soil (borrowed soil to be arranged by the bidder) and compacted so as to achieve at least 95 % maximum dry density as per is 2720 (part vii) including royalty/seignorage fee (if any), sorting, spreading, breaking clods, watering, ramming/compaction by manual/mechanical means, dressing, finishing to required lines, grades and slopes, tesing etc all complete. cum 10.0 0.005947738 2403 providing, stacking & laying granular morrum for shoulder including watering, compaction with road roller to required camber etc all complete. cum 2405 providing & laying water bound macadam base course in layers of required thickness with stone aggregate 63mm to 40mm size(irc 19 grading 1), stone screening and blinding material including screening sorting, spreading to template and consolidation with road roller including carriage, spreading and consolidation of blinding material moorum etc all complete. cum 1500.0 5.467357784 a2405 construction of granular sub base by providing close graded material conforming to specification,mixing in a mechanical mix plant at omc,carriage of mixed material to work site,for all leads and lifts,spreading in uniform layers of specified thickness on prepared surface and compacting with vibratory power roller to achieve the desired density,complete as per specifications and directions of engineer in charge. cum 160 cum 2406 providing & laying water bound macadam base course with stone aggregate 50mm to 20mm size stone(irc 19 grading 1) screening & binding material including screening, sorting, spreading to template & consolidation with road roller including carriage spreading & consolidation of blinding material moorum etc all complete. cum 2413 supplying and laying 400mmx150mmx350mm deep precast concrete kerb stone of grade m 20 with 20 mm nominal size stone aggregate and of shape as per detailed drawing including fixing with cement mortar (1:2) in 13mm thick joints, finishing of joints with neat cement paste, making drainage opening where required etc all complete. rm a2414 supply and laying 200 mm dia r.c.c np 3 type hume pipe in raised shoulders as rain water drains as per detailed drawing including fixing with cement mortar (1:2) in 13mm thick joints, finishing of joints with neat cement paste etc all complete. rm 50.0 0.08113939 b2414 supply and laying 600 mm dia r.c.c np 3 type hume pipe in raised shoulders as rain water drains as per detailed drawing including fixing with cement mortar (1:2) in 13mm thick joints, finishing of joints with neat cement paste etc all complete. rm 100.0 0.542031541 a2415 supply and laying 150mm dia r.c.c np 3 type hume pipe in raised shoulders as rain water drains as per detailed drawing including fixing with cement mortar (1:3) in 13mm thick joints, finishing of joints with neat cement paste etc all complete. payment terms a) on receipt of materials at site 50%; b) on completion of erection & fixing 50%. rm 200.0 0.183120975 2416 dismantling of existing road consisting of premix carpet, kerb stone/ brick on edge, bitumen macadem course, wbm, prepairing subgrade to receive new wbm including camber consolidation including disposal of debris within a lead of 1 km etc all complete. sqm providing and placing concrete work in road including cost of labour, materials (unless otherwise specified in boq/contract specification) and equipment for handling, transportation, batching, mixing, placing, vibrating and curing (excluding cost of centering, shuttering and reinforcement) with mechanised equipments like batching plant, transit mixer, concrete pump etc. complete as per drawing, specifications and as per direction of engineer in charge for the following: 2418 concrete of grade m10 (1 part cement, 3 part sand, 6 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors at any depth below finished floor level etc (rmc shall be provided free of cost as per tcc). cum a2419 providing and laying (using fully mechanised paver)cement concrete of grade m35 using 20 mm nominal size stone aggregate with approved admixture (if required), provision for necessary joints including compaction, finishing to lines and grades, curing and providing & fixing forwork etc. all complete. (excluding the cost of reinforcement and dowel bar) (rmc shall be supplied free of cost as per tcc) cum a2420 supplying and filling sand for preparation of road sub base/ sub grade in layers not exceeding 300 mm thickness and compacted so as to achieve at least 80% relative density as per is 2720 (part xiv) including spreading, watering, ramming/ compaction by manual/ mechanical means, dressing, royalty (if any) etc all complete. cum a2421 providing & laying dry lean cement concrete of grade m15 with 20 mm nominal size graded stone aggregate over a prepared sub grade including compaction, finishing, curing etc all complete. (rmc shall be supplied free of cost as per tcc) cum b2421 providing & laying dry lean cement concrete of grade m10 with 20 mm nominal size graded stone aggregate over a prepared sub grade including compaction, finishing, curing etc all complete. (rmc shall be supplied free of cost as per tcc) cum 180.0 0.170635749 a2423 providing and fixing separation membrane of impermeable plastic sheeting of 125 microns thick laid flat without creases etc. all complete sqm 2250.0 0.100978684 reinforcement 2425 providing and fixing in position ms dowel bar reinforcement including surface painted with bitumen and greasing, dowel end caps with cotton fills etc all complete as per specification, drawing and as directed by engineer. (bhel will supply ms dowel bar free of cost as per tcc) mt 1.9 0.250943979 2426 providing, straightening, cutting, bending, placing in position at any level, binding in position of steel reinforcements of tmt steel of grade fe 500 confirming to is:1786 including cost of binding wire, labour, scaffolding, transportation to & from stores etc all complete as per specification, drawing and as directed by engineer. (bhel will supply tmt free of cost as per tcc) mt 15.0 0.301213784 2427 providing, straightening cutting, bending, placing in position at any level, binding in position of steel reinforcement of mild steel reinforcements including cost of binding wire, labour, scaffolding transportation to & from stores etc all complete as per specifications, drawings and as directed by engineer. (bhel will supply reinforcement free of cost as per tcc) mt miscellaneous 2428 providing & installation of bitumen impregnated fibre board of specified thickness confirming to is 1838 as joint filler including nailing, coating of both faces with coal tar pitch/bitumin etc. all complete as per specification, drawing and as directed by engineer. rm 2429 providing and filling in position hot applied bitumen sealing compund (grade a) of specified thick confirming to is 1834 including cleaning, mixing, heating, pouring/injecting sealing compound in gaps in joints, sealant primer etc all complete as per specification, drawing and as directed by engineer. rm 950.0 0.024811674 2430 providing and laying debonding strip/tape of specified thickness before applying sealant including cleaning etc all complete as per specification, drawing and as directed by engineer. rm 2431 providing & laying 75 mm thick precast interlocking concrete pavers of approved colour and pattern as per specification and recommendation of manufacturer. sqm 2432 providing and laying 50mm thick sand layer below concrete pavers including compaction etc all complete as per specification, drawing and as directed by engineer. sqm total for pkg a 100 100 earth work earth work: earth work in excavation, backfilling and disposal including necessary men/women, materials, equipment, loading, transportation, unloading, dewatering etc as per specification, drawing and as directed by engineer in charge for the following: a101 earth work in excavation in all types of soil/ash which can be excavated by any means including setting out, levelling, dewatering (but excluding special type of dewatering viz. well point method), shoring & strutting (wherever required), dressing the sides & bottom, all lifts, ramming/compacting the excavated bottom, stacking, disposal of surplus excavated materials within a lead upto 1 km, spreading/levelling of disposed materials etc all complete for following depths below ground level. a depth from ground level but not exceeding 2 m cum 1696.0 0.4324417588 b depth exceeding 2 m but not exceeding 4 m cum 1396.0 0.4449566000 c depth exceeding 4 m but not exceeding 6 m cum 70.0 0.0278904492 d depth exceeding 6 m but not exceeding 8 m cum 10.0 0.0049941855 e depth exceeding 8 m but not exceeding 10 m cum 10.0 0.0060031528 103 earth work in excavation in soft rock (rock without any recovery of exacavated materials in the form of hard stone/boulder) including weathered rock which can be excavated by means of crow bar, pick axe, pneumatic rock breaker attachment with excavator machine etc but does not require chiselling or blasting including setting out, levelling, dewatering (wherever required), shoring & strutting, (wherever required), dressing the sides & bottom, all lifts, ramming/compacting the excavated bottom, stacking, disposal of surplus excavated materials within a lead upto 1 km, spreading / levelling of disposed materials etc all complete for following depths below ground level. a depth from ground level but not exceeding 2 m cum 10.0 0.0037724841 b depth exceeding 2 m but not exceeding 4 m cum 10.0 0.0045261705 c depth exceeding 4 m but not exceeding 6 m cum 10.0 0.0054318098 d depth exceeding 6 m but not exceeding 8 m cum 10.0 0.0065177666 e depth exceeding 8 m but not exceeding 10 m cum 10.0 0.0074943173 104 earth work in excavation upto any depth below ground level in hard rock requiring blasting (but excluding controlled blasting) including wedging, line drilling, pre shearing etc as required for grading, setting out, levelling, dewatering (wherever required), dressing the sides & bottom, all lifts, necessary licenses/statuatory clearances for blasting, supply, storage & handling of blasting materials, stacking/disposal of surplus excavated material within a lead upto 1 km, spreading / levelling of disposed materials etc all complete as per specification, drawing and as directed by the engineer in charge. b depth exceeding 2 m but not exceeding 4 m cum c depth exceeding 4 m but not exceeding 6 m cum d depth exceeding 6 m but not exceeding 8 m cum e depth exceeding 8 m but not exceeding 10 m cum a107 earthwork in back filling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 300 mm thickness using/with selected materials from compulsorily excavated earth available within a lead upto 1 km and compacted as specified including re excavation of stacked earth, watering, ramming/compaction by manual/mechanical means, dressing etc all complete.for the following. a each layer compacted so as to achieve at least 90% maximum dry density as per is 2720 (part vii) cum 23550.0 5.7551676448 b each layer compacted so as to achieve at least 95% maximum dry density as per is 2720 (part vii) cum 100.0 0.0270901639 a108 earthwork in back filling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 300 mm thickness using/with selected materials earth directly from excavation within a lead upto 1km and compacted as specified including re excavation of stacked earth, watering, ramming/compaction by manual/mechanical means, dressing etc all complete.for the following: a each layer compacted so as to achieve at least 90% maximum dry density as per is 2720 (part vii) cum 300.0 0.0366510406 b each layer compacted so as to achieve at least 95% maximum dry density as per is 2720 (part vii) cum 50.0 0.0064144386 a109 extra over st no. 101 and 103 to a108 for carriage of material/earth for every 500m or part thereof beyond an initial lead of 1km. cum 100.0 0.0023886997 a110 earth work in backfilling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 300 mm thickness so as to achieve required compaction with approved borrowed soil (borrowed soil to be arranged by the bidder) and compacted as specified including supplying borrowed soil, royalty/seignorage fee (if any), sorting, spreading, breaking clods, watering, ramming/compaction by manual/mechanical means, dressing, finishing to required lines, grades and slopes, testing, all lead and lifts etc all complete as per specification, drawing and as directed by the engineer for the following: a each layer compacted so as to achieve at least 95% maximum dry density as per is 2720 (part vii) cum 10.0 0.0132928401 b each layer compacted so as to achieve at least 90% maximum dry density as per is 2720 (part vii) cum 10.0 0.0119637587 a111 supplying and filling sand upto any depth under floors, around foundations, plinths, paving, passages, etc. in layers not exceeding 300 mm thickness and compacted so as to achieve at least 80% relative density as per is 2720 (part xiv) including spreading, watering, ramming/compaction by manual / mechanical means, dressing, royalty (if any) etc. all complete. cum 200.0 0.5795362227 a112 supplying and filling clean and well graded sand (conforming to is 383 with grading zone i to iii) upto any depth under floors, around foundations, plinths, paving, tank foundations, etc. in layers not exceeding 300 mm thickness and compacted so as to achieve at least 80% relative density as per is 2720 (part xiv) including spreading, watering, ramming/compaction by manual / mechanical means, dressing, royalty (if any) etc. all complete. cum 200.0 0.5845162259 a113 earth work in stripping of top soil upto a minimum depth of 0.30m below ground level so as to exclude all debris, grass, vegetation, bushes, trees having girth upto 300mm including roots and organic materials etc for leveling and grading including dressing to specified levels & grades and compacting the graded/stripped surface by manual/mechanical means, disposal of stripped materials within a lead upto 1km etc all complete as per specification, drawing and as directed by the engineer in charge. sqm 10.0 0.0004234421 200 concrete works concrete work: providing and placing concrete work including cost of labour, materials (unless otherwise specified in boq/contract specification) and equipment for handling, transportation, batching, mixing, placing, vibrating and curing (excluding cost of centering, shuttering and reinforcement) with mechanised equipments like batching plant, transit mixer, concrete pump etc. complete as per drawing, specifications and as per direction of engineer in charge for the following:( bhel will supply ready mix as per scope of matrix). (scope of transportation of concrete through transit mixer from batching plant to pouring point & concrete pouring through concrete pump/suitable boom pressure as per site requirement is in bhels rmc agency scope) 201 concrete of grade m7.5 (1 part cement, 4 part sand, 8 parts of 40 mm graded aggregate by volume) as mass filling course, lean concrete, levelling course, mud mat under and around foundations/ floors, at any depth below finished floor level etc. cum 475.3 0.9015507665 202 concrete of grade m10 (1 part cement, 3 part sand, 6 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors at any depth below finished floor level etc. cum 245.0 0.4646962954 203 concrete of grade m15 (1 part cement, 2 part sand, 4 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors at any depth below finished floor level etc. cum 10.0 0.0189677746 204 concrete of grade m20 (1 part cement, 1.5 part sand, 3 parts of 20 mm graded aggregate by volume) under floors, paving, plinth protection, pipe encasing etc complete. cum 251.0 0.4760765549 a204 concrete of grade m20 (1 part cement, 1.5 part sand, 3 parts of 12 mm graded aggregate by volume) under floors, paving, plinth protection, pipe encasing etc complete. cum 10.0 0.0189677746 205 providing and laying design mix cement concrete conforming to is:456 & is 10262 2009 for reinforced concrete works with coarse sand and graded hard stone aggregate of 20mm nominal size in foundations/substructure, grade slab, paving, drains, under floors etc at all level below finished floor level, any shape, position or thickness etc complete including use of plasticizer/ superplasticizer conforming to is:9103 (latest) to achieve required slump in concrete all complete as per specification & drawing for the following. a m 25 grade cum 3342.5 6.3397750424 b m 30 grade cum 10.0 0.0189677746 ac m 35 grade cum 235.0 0.4457285208 206 providing and laying design mix cement concrete of grade conforming to is:456 & is 10262 2009 for reinforced concrete works with coarse sand and graded hard stone aggregate of 20mm nominal size in superstructure at upto 9 mtr above finished floor level, any shape, position or thickness etc complete including use of plasticizer/ superplasticizer conforming to is:9103 (latest) to achieve required slump in concrete all complete as per specification & drawing for the following. a m25 grade cum 475.5 0.9018891150 b m 30 grade cum 10.0 0.0189677746 a207 providing and laying design mix cement concrete confirming to is:456 & is 10262 2009 for reinforced concrete works of grade mentioned below in machine foundations for tg, gas turbine, id/fd/pa fans, bfp, coal mills, booster fans, ball mills, etc. at all elevations below/above finished floor level except tg deck and top decks supported over vibration isolation system but including tg foundation columns with addition of suitable plasticizer conforming to is 9103(latest) to achieve a slump more than 125mm in concrete as per manufacturers recommendation with 20 mm nominal size graded aggregate in concrete all complete as per specification & drawing a m 30 grade cum 210.0 0.3983111103 b m 35 grade cum 30.0 0.0569012978 211 providing and encasing of structural steel member with concrete using nominial aggregate size of 12.5mm down. encased member shall be wrapped with welded wire mesh/chicken wire mesh with proper lap etc. complete as per specification for the following grades. (payment of welded wire mesh, chicken wire mesh shall be made separately) a m20 grade cum 10.0 0.0189677746 b m25 grade cum 10.0 0.0189677746 212 screed concrete conforming to is 456 with coarse sand and graded hard stone aggregate 12.5mm/6 mm nominal size on the roof at any level or thickness, drains etc complete as per following. a 1:2:4 (1 part cement, 2 part sand, 4 parts of aggregate by volume) (m15) cum 38.6 0.0731177118 b 1:1.5:3 (1 part cement, 1.5 part sand, 3 parts of aggregate by volume) (m20) cum 10.0 0.0189677746 213 providing and laying design mix cement concrete as per is:456 & is 10262 2009 for reinforced concrete works using graded aggregate for concrete in precast works like roof slabs/trench covers, fins, lintels, chajas, beams, columns, wall panels, facias etc.at all levels in all kinds of work including formwork/moulds, curing, rendering the top exposed surface with cement sand mortar (1:3), handling, storing, transpoting, all leads, erection without damage, setting in position with cement sand mortar (1:3), filling the gaps between adjacent preacast units with m30 grade concrete or cement sand mortar (1:3) and including making of holes for bolts for fixing, welding etc.complete with graded aggregate (20/12.5/10 mm) and as per specification and drawing for following grades. a m 25 grade cum 10.0 0.0189677746 b m 30 grade cum 10.0 0.0189677746 214 providing and laying design mix cement concrete as per is:456, is 3370 & is 10262 2009 for reinforced concrete works using graded aggregate for concrete in water retaining/conveying structures including addition of suitable plastisizer cum waterproofing cement additives confirming to is 9103 latest to achieve a slump more than 125 mm in concrete as per manufacturers recommendation and conforming to limits of permeability as per is 2545 and specification with 20 mm nominal size graded aggregate for following grades. watertightness is to be ensured including structural grouting if required. a m 25 grade cum 10.0 0.0189677746 b m 30 grade cum 10.0 0.0189677746 215 dismantling concrete work for all types of structures at all levels including stacking of servicable material to a lead of 500 m and disposal of unservicable material upto a lead of 2 km, cutting of reinforcement, labour, equipment, safety precautions etc all complete as per drawings, specification and instructions of engineer in charge. a plain cement concrete of all grades cum 10.0 0.0269057943 b reinforced cement concrete of all grades cum 10.0 0.0387783813 216 chipping of concrete in reinforced concrete work, cutting pockets, making openings at all levels and according to shapes, disposal of waste materials upto a lead of 2 km as directed by engineer including equipment, safety precautions, making good the broken surface etc all complete as per specification, drawing, instructions of engineer in charge but excluding cutting of reinforcement . cudm 10.0 0.0011953629 217 extra over and above st no 216 for cutting of reinforcement, all sizes and types including labour, equipment, return of cut reinforcement to store etc all complete as per specification, drawings and instructions of engineer in charge. measurement shall be on the cross sectional area of reinforcement cut. sqcm 10.0 0.0000790155 218 cutting reinforced concrete with mechanised tools like core drilling machine etc. for cutting pockets, holes, cores in slab, beam, column or foundation as per direction of engineer in charge. cudm 10.0 0.0056303616 219 providing and applying curing compound (water based) of approved make where ever required as per manufacturers specification. sqm 10.0 0.0024170642 223 cutting of existing concrete/ rcc slab (total thickness upto 250mm including floor finsih & deck sheet if any) inside control room/ pump house or anywhere inside boundary using power tools of (dd2e of hilti/ bosch make or equivalent) with low noise and dust including cutting reinforcements, removing the rubbish within a lead of 1 km, including making good the broken edges/ surface with cement mortar, painting, finishing to match with existing finishing, scaffolding/ supporting at all level, all complete and as directed by engineer (measurements shall be taken as per cutting surface area). sqm 1.0 0.0037704581 224 extra for rcc work above 9 mtr above ffl for each 5 mtr lift or part thereof cum 200.0 0.0376275913 300 form works formwork: providing, fixing and removing formwork at all elevations for all structures, as per specifications and including all labour, material, scaffoldings and centereing etc. complete as per drawing, specifications and as per direction of engineer in charge for the following: 301 fairface form work with good quality water proof ply wood of minimum 12mm thickness and smooth surface below finished ground floor level for foundations, footings, base of columns, walls, columns, pilasters, beams, mass concrete, trenches etc.including chamfering of edges as per drawing, specification and instruction of engineer in charge.. sqm 4639.0 5.5448182256 a302 fairface form work with good quality water proof ply wood of minimum 12mm thickness and smooth surface above finished ground floor level for columns, beams, suspended floors, roofs, lintels, cantilevers, staircases, landings, balconies, etc. including chamfering of edges as per drawing.for all heights as per specification, drawing and instruction of engineer in charge. sqm 9080.0 12.9030728078 b302 ordinary form work above finished ground floor level for columns, beams, suspended floors, roofs, lintels, cantilevers, staircases, landings, balconies, etc. including chamfering of edges as per drawing.for all heights as per specification, drawing and instruction of engineer in charge. sqm 200.0 0.2251455800 304 providing, fixing and removing formwork in block outs/pockets and openings (below 0.1 sqm plan area) at all elevations including cutting, formation of all shapes and all other operations required for making the required shape and size all complete as per specification, drawing and instruction of engineer in charge. a upto 150 mm depth each 10.0 0.0054176276 b pockets of depths more than 150mm and upto 300 mm depth each 50.0 0.0476767434 c pockets of depths more than 300mm and upto 600 mm depth each 50.0 0.0879179247 d pockets of depths more than 600mm and upto 1000 mm depth each 50.0 0.1403761195 e pockets of depths more than 1000mm and upto 1500 mm depth each 26.0 0.1066283924 f pockets of depths more than 1500mm and upto 2000 mm depth each 10.0 0.0543180984 400 reinforcement reinforcement work: reinforcement work including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling etc at all level as per specification, drawings and as directed by engineer in charge for the following:. 401 providing, straightening, cutting, bending, placing in position at all level, binding of mild steel reinforcements conforming to grade 1 of is:432 part 1 in concrete including cost of reinforcement steel, binding wire, labour, scaffolding, transportation to & from stores etc. all complete as per specifications & drawings. mt a402 providing, straightening, cutting, bending, placing in position at all level, binding in position of steel reinforcements of high yield strength deformed tmt steel bars of grade fe 500 having minimum elongation of 14.5 % or fe 500d conforming to is:1786 including cost of reinforcement steel, binding wire, labour, scaffolding, transportation to & from stores etc complete all as per specifications, drawings and as directed by engineer.(bhel will supply tmt free of cost as per tcc) mt 362.5 9.1027407887 a402 a taking delivery from bhel store, unloading the same at contractor’s yard straightening, cutting, bending, of steel reinforcements of high yield strength deformed tmt steel bars of grade fe 500 having minimum elongation of 14.5 % or fe 500d conforming to is:1786 including all labours and t&p all complete. mt 10.0 0.1141753866 a402 b placing in position, binding in position the cut and bend reinforcement steel using binding wires the steel reinforcements of high yield strength deformed tmt steel bars of grade fe 500 having minimum elongation of 14.5 % or fe 500d conforming to is:1786 including all labours and t&p all complete mt 10.0 0.1369359057 405 providing & fixing of rebar in existing concrete surface by inserting reinforcemnet bar with epoxy based suitable bonding compound of hilti or equivalent make (hit re 500 of hilti or equivalent make) for interconnection of new r.c. structure with existing r.c. structure. depth of drilled hole should be suitable to develop maximum recommended strength as per approved manufacturers recommendation. this item includes supply of all materials including bonding chemicals, t&p required to execute the work, cost of all labour, transportation of chemical, staging to reach work place etc. all complete as directed by engineer in charge. random pull out non destructive test as directed by engineer shall beconducted to ensure strength of bond and same is included in this item. reinforcement bar shall be paid separately under item no. 402, 403, 405 as applicable. a 12mm reinforcement bar nos. 1.0 0.0007901551 b 16mm reinforcement bar nos. 1.0 0.0012500659 c 20mm reinforcement bar nos. 1.0 0.0017626537 406 supply and fixing reinforcement bar couplers (of approved manufacturers as per the relevant is code) in position for steel reinforcements of tmt steel of grade fe 500d or 500eqr confirming to is:1786 including , labour, scaffolding, transportation to & from stores etc complete all as per specifications, drawings and as directed by engineer.(agency has to supply reinforcement bar couplers). a 12mm dia nos. 1.0 0.0000871197 b 16mm dia nos. 1.0 0.0001114321 c 20mm dia nos. 1.0 0.0001397967 d 25mm dia nos. 1.0 0.0002289424 e 28mm dia nos. 1.0 0.0002856715 f 32mm dia nos. 1.0 0.0003727911 500 water prooofing works roof treatment works: roof treatment works including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, curing, sampling, testing etc at all level as per specification, drawings and as directed by engineer in charge for the following: a502 providing and laying topping plaster with cement mortar 1:4 (1 cement : 4 sand) and thickness of 25 mm including preparation of surface, batching, mixing, leveling etc. all complete. sqm 10.0 0.0026824753 a506 providing and applying pu based water proofing treatment with one coat of polymerised mastic over the rcc roof to achieve smooth surface as primer with an application rate of minimum 6 sq.m per litre and two successive liquid coatings of high solids content urethane pre polymers or equivalent material based finish coats as per relevant is/astm standards(astm c 836 and astm c 898), to form an elastomeric membrane with overall dry film thickness 1.5 mm subject to minimum 500 gm/sqm/coat application rate. item includes surface preparation, polyscrim cloth /fabric, polymerised mortar base preparation, etc all complete as per specifications and directions of engineer in charge. sqm 1422.0 3.2331181640 507 providing and laying wearing course consisting of 25mm thick plain cement concrete of grade m15 (1:2:4) with graded aggregate of 12.5mm size cast in panels of maximum size 1.2mx1.2m and reinforced with 0.56 mm dia. galvanised chicken wire mesh and sealing of joints (in grooves of 6mm x 6mm) using silicon /elastomeric compound etc all complete. (bhel will supply rmc as per scope of work) sqm 1422.0 1.3672783156 510 providing and laying cement concrete chequered flooring tiles of 22 mm thickness and size 300x300 mm conforming to is 13801 with 8 mm thick 1:4 cement mortar over the top most layer of roofing treatment in pathway or entire area with fine joints including sealing of joints (silicon/elastomeric sealant) and providing expansion gap in both directions filled up with (silicon/elastomeric) joint sealant, including underbed(as per drawings) filled up with (silicon/elastomeric) joint sealant etc all complete. (water proofing paid elsewhere)(including cost of cement for tiles making) sqm 160.0 0.2439451934 b511 providing and applying min two coats of bitumen grade 85/25 as per is 702 ( @ 1.7kg/sqm)with 1% antistripping compound conforming to is 6241 in foundation, wall, column etc on concrete surfaces exposed to soil / ash including surface preparation etc. all complete. sqm 2938.0 0.9520437038 513 providing and mixing water proofing compound conforming to is:2645 in concrete or cement mortar all complete. kg 10.0 0.0031079434 a518 providing and applying waterproofing treatment (two component transparent polyamide cured epoxy sealer coating, having solid by volume minimum 40%+ 2%, of minimum 50 micron dft & sealer coat shall be followed with the application of epoxy phenolic coating, solid by volume minimum 63%, of minimum 400 micron dft for the concrete surfaces of underground water retaining structure including surface preparation etc. all complete as per specification. sqm 50.0 0.0252262082 a519 providing and applying waterproofing treatment with minimum 400 micron food grade epoxy coating complying to fda title 21, part 175.300 for the internal concrete surfaces of water retaining structure including surface preparation etc. all complete as per specification. sqm 50.0 0.0641950372 a520 providing and fixing lining on internal surfaces of sumps with replaceable chlorobuty/bromobutyl rubber lining of minimum 5 mm thickness or with vinly ester based flake glass lining of minimum 3 mm thickness etc. all complete as per specification. sqm 400.0 2.3630338050 a521 providing and fixing acrylic based polymer modified cementitious composite coating system etc. all complete as per specification. sqm 10.0 0.0068480109 a522 providing and fixing minimum two coats acrylic based polymer modified cementitious composite coating system including mixing of fine silica/quartz sand of 0.6 mm nominal size for better abrasion resistance and total nominal thickness of such coating shall be minimum 1.5 mm etc. all complete as per specification. sqm 10.0 0.0071904115 b522 providing and fixing waterproofing treatment to be provided on sunken portion of all vertical and horizontal surfaces of depressed portions of false floor, toilets, w.c., kitchen, pantry and the like consisting of : (i) ist course of applying cement slurry @ 4.4 kg/sq.m mixed with water proofing compound conforming to is 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) iind course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) iiird course of applying blown or residual bitumen applied hot at 1.7 kg. per sq.m of area. (iv) ivth course of 400 micron thick pvc sheet. (overlaps at joints of pvc sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sq.m) etc. all complete. sqm 10.0 0.0124763465 600 joints and fillers joints and fillers: joints & fillers including all labour, material, equipment, transportation, handling etc at all level as per specification, drawings and as directed by engineer in charge for the following: 601 supplying & installation of bitumen impregnated fibre board confirming to is 1838 as joint filler at joints in concrete including nailing, coating of both faces with coal tar pitch/bitumin etc. all complete. a 12 mm wide joints. sqm 10.0 0.0130679498 b 20 mm wide joints. sqm 15.0 0.0309173510 c 25 mm wide joints sqm 20.0 0.0506793328 d 50 mm wide joints sqm 25.0 0.1223139842 603 providing and applying polysulphide based sealant conforming to is:12118 in joints in concrete including cleaning of joints, raking out groove, application of primer, scaffolding etc. all complete for following size grooves: a 25mmx25mm rm 10.0 0.0147677963 b 50mmx25mm rm 10.0 0.0284476098 604 supplying and filling in position hot applied bitumin sealing compund (grade a) confirming to is 1834 including cleaning, mixing, heating, pouring/injecting sealing compound in gaps in joints including application of primer etc. all complete. a 10mm x 40mm rm 10.0 0.0008772748 b 12mm x 25mm rm 10.0 0.0007962332 c 20mmx25mm rm 10.0 0.0009562903 ae 100 mm wide joints with polystyrene board of type 1 conforming to is: 4671 with density 20 kg/cum sqm 30.0 0.0191926649 606 providing and installing pvc joint sealing strips of minimum 3mm thickness and minimum width 100 mm at the construction, expansion and isolation joints from reputed manufacturers as a continuous diaphragm to contain the filler material and/ or to exclude passage of water or any other material into or out of the structure, without any longitudinal joint; and shall be procured and installed in largest practicable lengths having a minimum number of transverse joints with jointing procedure as per the manufacturer’s recommendations including the material and tools required for jointing, testing, protection, etc all complete. the joints in rubber seals shall be vulcanished as needed. rm 10.0 0.0025507828 607 providing and installing strong and tough alkathene sheet or equivalent of about 1 mm in thickness in isolation joints and shall be fixed by an approved adhesive compound on the cleaned surface of the already set concrete as per the manufacturer’s recommendations, to cover it fully including the material and tools required for jointing, testing, protection, etc all complete. sqm 15.0 0.0031869589 608 supplying and filling in position hot applied bitumin sealing compund (grade b) confirming to is 1834 including cleaning, mixing, heating, pouring/injecting sealing compound in gaps in joints including application of primer etc. all complete. a 10mm x 40mm rm 5.0 0.0007435562 b 12mm x 25mm rm 5.0 0.0006240199 c 20mmx25mm rm 5.0 0.0008509363 609 providing and sealing of joints with premium grade silicon sealant ( silpruf of ge silicons or approved equivalent) including cleaning of joints, raking out groove, joint filler tapes, application of primer, curing, scaffolding etc. all complete as per manufacturers recommendation for following size groove: a 25mmx25mm rm 5.0 0.0026156160 b 50mmx25mm rm 5.0 0.0046740714 610 providing and fixing pvc water stops in joints conforming to is 12200 & is 15058 all complete for the following: (bulb or kicker type) d 230 mm wide and 6 mm thick rm 128.0 0.0652769419 612 providing and applying approved fire retardant sealant in joints/openings including cleaning of joints/openings, raking out groove, application of primer, scaffolding etc. all complete. a 25mmx25mm rm 5.0 0.0090300546 b 50mmx25mm rm 5.0 0.0175029486 613 providing and fixing g.i strips minimum 1.5mm thk and 150mm wide including fixing accessories etc. all complete. kg 10.0 0.0030289279 614 providing and fixing aluminium strips minimum 18 swg thk and 300mm wide over expansion joints with minimum lap of 50mm length including brass / aluminium screws, rawl plugs etc. all complete. kg 9.0 0.0085336751 615 providing and fixing 300 mm wide stainless steel strips over expansion joints with minimum lap of 50mm length including stainless steel screws, rawl plugs etc. all complete. kg 9.0 0.0078650824 700 ms embedments ms embedments: embedments including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling etc. at all level as per specification, drawings and as directed by engineer in charge for the following: 701 supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting etc. all complete. mt 1.0 0.1906360623 a701 supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting, manual cleaning and providing with primer coat of chlorinated rubber based zinc phosphate primer of minimum 50 micron dry film thickness (dft). etc. all complete. mt 1.7 0.4045087628 702 supply, fabrication, transportation, delivery at site and erection, installation and alignment of mild steel foundation bolt assembly conforming to is:2062 and grade 1 of is:432 in concrete along with nuts, lock nuts (as per is:1363, 1364 and is:3138), washers, anchor plates, stiffner plates, protective tape, pipe sleeves, templates etc. including welding, cutting, grinding, threading, drilling etc. all complete. mt 0.5 0.1189730464 a703 same as above items 701, a701 & 702 with bhel supplied material free of cost including loading, transportation, unloading etc. all complete from bhel store to plant site. a mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. mt 31.0 1.3452694569 b mild steel foundation bolt assembly conforming to is:2062 and grade 1 of is:432 in concrete along with nuts, lock nuts (as per is:1363, 1364 and is:3138), washers, anchor plates, stiffner plates, protective tape, pipe sleeves, templates etc. mt 6.8 0.2901793972 704 supplying, fabricating, erecting and installing following items in concrete/brickwall for all kind of works, including setting material in concrete, layout, scaffoling, cutting, forming, grinding, drilling, bolting, welding, jointing, testing etc. all complete. a ms pipes of all diameters kg 20.0 0.0038251611 b pvc pipes / conduits of all diameters kg 15.0 0.0101605842 c upvc pipes / conduits of all diameters kg 15.0 0.0105982086 d expansion anchor fasteners (galvanised) of hilti make(hud 1 universal fastners) or equivalent of safe tensile capacity as specified below for brick work with expansion sleeve of a6 polyamide: i 8mm dia each 10.0 0.0011426858 ii 10mm dia each 10.0 0.0013290814 iii 12mm dia each 10.0 0.0014871124 iv 14mm dia each e expansion fasteners (mechanical galvanised) of hilti make or equivalent of safe tensile capacity as specified below for concrete work with expansion sleeve of stainless steel: i hst m8 each 1.0 0.0002714892 ii hst m10 each 1.0 0.0003869734 iii hst m12 each 1.0 0.0006179418 iv hst m16 each 1.0 0.0011102692 v hst m20 each 1.0 0.0022691634 vi hst m24 each 1.0 0.0029863811 f chemical expansion fasteners (galvanised)of hilti make or equivalent of safe tensile capacity as specified below for concrete work with anchoring rod,nuts,washers,chemicals all complete,etc: i has e5.8 m8 each 1.0 0.0006321241 ii has e5.8 m10 each 1.0 0.0007496343 iii has e5.8 m12 each 1.0 0.0009218476 iv has e5.8 m16 each 1.0 0.0014668520 v has e5.8 m20 each 1.0 0.0023643872 vi has e5.8 m24 each 1.0 0.0031768287 706 supply and installation of approved 25mm thick vibration damping resilient pads on/around foundation of vibrating equipment and at other locations all complete. sqm 10.0 0.0327225515 707 providing, laying and fixing rails(52kg/rm) and guide rails in concrete for transformer, rail track including cutting of rails, joining of rails, anchoring lugs etc all complete. mt 0.5 0.0793113122 800 grouting grouting: grouting including all labour, material (unless otherwise specified in boq/contract specification), equipment, roughening surface, cleaning, ramming, curing etc. at all level , drawings and as directed by engineer in charge for the following: 801 providing & grouting with cement slurry mix of approved ratio using pressure pump for water retaining concrete structures as per approved procedure including cost of nipples/ nozzles, cement, admixture, curing, pressure pumps, slurry agitator etc. all complete. cost shall include fixing of nipples at maximum 500 mm centre to centre spacing, cutting of nipples after completing of grouting, making good of the nipple hole with appropriate non shrink cement paste, water tightness test etc. all complete wherever specified in the drawing. sqm 5.0 0.0069513389 802 providing & grouting of pocket holes, pipe sleeves under base plates, machinery, pipe supporting structures etc. with mix 1:1 (1 cement :1 sand ) using non shrink admixture etc. all complete. cum 0.5 0.0273697572 803 providing & grouting of pocket holes, pipe sleeves and under base plate of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing etc. all complete with mix 1:1:2 (1 cement : 1 coarse sand : 2 aggregate of 6 mm down graded stonechips ) using non shrink admixture as per specification, drawing and direction of engineer in charge. (cost of all material and cleaning the pocket by compressed air shall be in the scope of the contractor). cum 5.0 0.2080154225 804 providing & grouting of pocket holes, pipe sleeves and under base plates of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing etc. all complete with conbextragp 1 or equivalent as per specification, drawing and direction of engineer in charge. (cost of all material and cleaning of the pockets by compressed air shall be in the scope of the contractor). cum 5.0 0.8478364277 805 providing & grouting of pocket holes, pipe sleeves and under base plates of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing, etc. all complete with conbextra gp 2 or equivalent as per specification, drawing and direction of engineer in charge.(cost of all material and cleaning of the pockets by compressed air shall be in the scope of the contractor). cum 5.0 1.0018639962 806 providing chemical (epoxy) injection grouting with pressure pump for water retaining concrete structures conforming to is:6494, including fixing nozzles, cost of approved chemical, admixture, curing etc. all complete . payment shall be made as per the consumption of chemical grout. kg 4.0 0.0197194350 807 providing on the outer surface of walls, frames, rafts and roof slabs coming in contact with earth, polymer modified cementitious coating in two layers as specified and as per manufacturer’s specifications shall be provided directly on the concrete surface : 50 mm thick p. c. c. (1 : 2 : 4 with 10 mm nominal size stone aggregates) shall be provided under the raft i.e. over the lean concrete, followed by polymer modified cementitious coating in two layers ( slurry mix application ) as per manufacturer’s specification. 50 mm thick p. c. c. ( 1 : 2 : 4 ) with 10 mm nominal size stone aggregates shall then be laid over the polymer modified cementitious coating before laying the raft. sqm 100.0 0.2145493974 808 providing chemical injection grouting with minimum, 12 mm dia (nb) threaded nozzle of suitable length over the surface and along the construction joint line in a grid pattern at a spacing not exceeding 1.5m c/c before concreting operation after the nozzles are fully set, neat cement slurry admixed with water soluble non shrink polymer / monomer based chemical shall be injected through the net work of nozzles with low pressure grout pumps at a pressure of about 2.0 kg/sqcm. cement slurry shall be prepared by mixing cement with non shrink polymer/monomer @ 500 gm/50 kg bag of cement and water, ensuring that water: cement ratio does not exceed 2 (by weight). wetter the structure, lesser should be the water cement ratio. the property of the polymer/monomer should be such that when it is mixed with water @ 0.5% by weight of water, the viscosity of the resultant solution (water and polymer/monomer) should not be more than 1.2 centipoises. plasticizing agent shall be added wherever required. the grouting shall be started at very low pressure and increased gradually to a required pressure. the grouting shall continue, till the hole refuses to take any further grout, even at an increased pressure. applied pressure shall not be more than the designed strength of the concrete. after completion of grouting operation, the nozzles shall be sealed properly to the satisfaction of the engineer sqm 100.0 0.1431234280 900 doors, windows, ventilators, louvers doors & windows: doors, windows, ventilators, louvers, roof ventilators, rolling shutters, partitions including all labour, material (unless otherwise specified in boq/contract specification), equipments, transportation, handling, preparation of working drawings etc. at all level as per specification, drawings and as directed by engineer in charge for the following: a903 providing, fitting and fixing factory made pre laminated solid core flush door shutter as per is 2202 part ii, 35mm thick homogenous particle board bonded with bwp type phenolformaldihyde synthetic resin, partical board core conforming to is 3087 type i, 35x12 mm thick teakwood beading all around including preparation of working drawings. godrej or equivalent make mortice lock with handels on both sides,approved isi mark anodised fittings like door stopper,300mm long tower bolts,16x300mm long aldrops ,125mm long handles on both sides etc. butt hinges, sliding bolt, knobs, (all fittings shall be anoidised aluminium color dyed), finish synthetic paint over primer, screws etc. all complete as per drawing, specification and instruction of engineer in charge. with commercial faces and teak wood edges. (finish painting paid separately) sqm 2.6 0.0286542658 a904 providing and fixing single or double steel door shutters with 45mm thk flush design shutter comprising of two outer sheets of 18 gauge steel sheets rigidly connected and reinforced inside with continuous vertical 20 gauge stiffeners, spot welded in position at not more than 150mm on centres including void filled with mineral wool (density as per specification), all fittings, godrej or equivalent make mortice lock with handle on both sides, shop and final painting etc all complete. side , top sqm 59.5 0.8112866890 and bottom edges of shutters shall be reinforced by continuous pressed steel channel with minimum 18g. a906 providing and fixing anodized extruded aluminium doors (single or double shutter) conforming to is:1948, is:1949 fabricated from extruded sections of hindalco/jindal/indal or equivalent make having minimum 2mm wall thickness as per is:1285, is:733 and anodized and electro color coating of required shade as per is 1868 ( minimum anodized coating of grade ac15 ). fixed with rawl plugs, expansion fasteners,ss screws / fixing clips necessary filling of gaps at junctions, at top, bottom & sides with required pvc / neoprene felt for bi metallic protection etc. glazing shall be clear float/toughened glass of 6mm thickness including snap fit type beading, concealed screws, fixtures, godrej or equivalent make mortice lock with handle on both sides, etc all complete. aluminium section shall be smooth, free of stains, straight, mitred & jointed mechanically wherever required. (glazing shall be paid separately) kg 456.8 0.5532220317 a907 providing and fixing fire proof steel doors (single or double shutter) with panic devices shall be 45mm thk flush design comprising of two outer sheets of 18 gauge steel sheets rigidly connected and reinforced inside with continuous vertical 20 gauge stiffeners, spot welded in position at not more than 150mm on centers including all fittings, vision panel of minimum 11mm thick inter layered fire resistant glass, shop painting with approved post office/signal red color fire resistant paint and mineral wool insulation (64 kg/cum density) complete and shall be fire proof as per is:3614, tac requirements and as per specification. minimum ratings shall be 2 hrs. sqm 10.0 0.2293556885 908 providing and fixing steel windows/ventilator with steel sections as per is:1038, is:1361 & is:7452 latest revision including all fittings, metal beadings, hold fasts, shop and final painting ,glazing etc. all complete. (glazing shall be paid separately) a openable type sqm 10.0 0.0534935006 b fixed type sqm 10.0 0.0351943188 a909 providing and fixing anodised aluminium work of indal, jindal, hindalco or other equivalent approved make for door frames, windows, ventillators, partitions, railing etc with extruded standard tubular and other sections(of minimum 2mm wall thickness) including all fittings & fixtures and accessories of approved make conforming to is733 and is1285, anodised and electro color dyed to required shade according to is 1868 (minimum anodic coating of grade ac15), fixed with rawl plugs, expansion fasteners, ss screws or with fixing clips, including necessary filling of gaps at junctions, at top, bottom and sides with required pvc/neoprene felt for bi metalic protection etc. including preperation of working drawings, aluminium cleat angle, aluminium snap on beading for glazing/panelling, stair case tread nosing, with all fittings and fixtures (like tower bolts, handles, door stopper with rubber shoes, l drops, stays, floor springs, hydraulic door closures etc.), cp brass/stailess steel screws, providing and fixing hinges/pivots, and making provision for fixing of fitting wherever required including cost of pvc/neoprene gasket, all complete as per drawing, specification and instructions of engineer in charge (glazing and panelling shall be paid seperately).weight of aluminium section only shall be measured. kg 300.0 0.3386483218 911 providing and fixing of door closers as per specification ,of approved make & quality all complete of following type : a over head hydraulic door closures as per is 3564 each 2.0 0.0073565466 b floor mounted hydraulic door closers as per is 6315 each 2.0 0.0126384296 912 providing and fixing pressed steel frames fabricated from 16 gauge m.s sheet mortised, reinforced drilled and tapped for hinges and locks bolts strikes, hold fasts adjustable floor anchors, floor tiles/weather bars ,paintings etc all complete as per specifications. kg 100.0 0.0305465859 913 providing and fixing in position rolling shutter of hot rolled double dipped galvanised steel lath section of 18 swg tested mild steel strips at 75mm rolling centres interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation including wire springs, top cover, primer & shop coats of approved enamel paint etc, all complete as per is 6248 and specification of approved make of following types: the bottom lath shall be coupled to a lock plate fabricated from 3mm thick galvanised steel plate and securely rivetted with stiffening angles.(partly coiled and lath/full lath). a hand operated sqm b mechanically operated sqm 77.0 0.6366765930 c electrically operated sqm 116.0 1.0321715095 915 providing, fixing and fitting of glazing of first grade class in steel/aluminium/wooden frames, where ever required, cleaning after fixing including hardware, gaskets, clips, beadings etc. all complete. aa 6 mm thick ground glass sqm 10.0 0.0534752663 ad 6 mm thick laminated glass sqm 10.0 0.0399494317 ae 3mm thick polycarbonate sheet fire retardant and ultra violet resistant sqm 50.0 0.2023364360 ah 6 mm thick clear toughened glass sqm 91.0 0.4382159692 aah 6 mm thick wired glass sqm 20.0 0.0590995498 i two nos. 6 mm thick clear toughened float glass hermetically sealed and separated by 12 mm thick air gap for thermal insulation (only single elevation area to be measured) sqm 5.0 0.0373257115 ai two nos. 6 mm thick clear toughened float glass hermetically sealed and separated by 24 mm thick air gap for thermal insulation (only single elevation area to be measured) sqm 10.0 0.0896947607 e 6mm thick polycarbonate sheet multi (twin) wall fire retardant and ultra violet resistant with sealed open edges. sqm 15.0 0.0885277623 916 supplying and fixing weather stripping of approved make and quality to doors as per instructions of engineer in charge and specification complete. rm 20.0 0.0106772241 917 providing and fixing 12 mm thick bwp particle board, decorative veneer (prelaminated) on both sides, as panels in aluminium framed door shutter, fixed with necessary snap on beading etc. all complete (excluding aluminium works). sqm 10.0 0.0354860684 918 providing and fixing steel louvered window with ismc 100 frame all round including verticals with 18g pressed steel louvers, painting etc. all complete. sqm 5.0 0.0357514794 919 providing and fixing 1 mm thk. ms sheet sliding shutters with frame and diagonal braces of 50x50x6 angle iron, 3 mm ms gusset plates at junction and corners, 25 mm dia pulley, 50x50x6 angle and t iron guide at the top and bottom respectively including painting etc. all complete. sqm 5.0 0.0496561833 a920 providing and fixing of welded wire fabric of 1.6mm thick wire as per is: 4948 and 12mm x 30mm mesh size. in conveyor gallery windows. sqm a923 providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. (only weight of grill to be measured for payment). kg 10.0 0.0112890878 1000 brickwork brickwork: brickwork masonry including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, scaffolding etc. at all levels as per specification, drawings and as directed by engineer in charge for the following: 1001 providing brick work in cement mortar 1:6 (1 part cement 6 parts coarse sand) in walls, chambers etc. in thickness varying from 230mm to 460mm at all depths, places and positions below plinth including raking out joints, curing, scaffolding etc. complete excluding plastering and painting. a using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2 (including cost of cement for brick making) cum 20.0 0.1740103885 c using burnt clay bricks of class designation 7.5 of nominal dimension cum 1002 providing brick work in cement mortar 1:6 (1 cement 6 coarse sand) in walls, chambers etc. in thickness 230mm at all heights, places and position above plinth including raking out joints, curing, scaffolding etc complete excluding plastering and painting. a using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2 (including cost of cement for brick making) cum 471.0 5.0465302081 c using burnt clay bricks of class designation 7.5 of nominal dimension cum a1002 providing brick work in cement mortar 1:6 (1 cement 6 coarse sand) in walls, chambers etc. in thickness 345mm at all heights, places and position above plinth including raking out joints, curing, scaffolding etc complete excluding plastering and painting. d using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2(including cost of cement for brick making) cum 95.6 1.0243064272 1003 providing brick work in cement mortar 1:4 (1 cement 4 coarse sand) in partition walls, chambers etc. in thickness 115mm at all heights, places and position above or below plinth/graded level including providing two nos. 6 mm diameter ms bars at every third layer, raking out joints, curing, scaffolding etc complete excluding plastering and painting as per specification. a using fly ash lime bricks confirming to is 12894 with crushing strength of 75 kg/cm2(including cost of cement for brick making) sqm 95.0 0.1293625730 c using burnt clay bricks of class designation 7.5 of nominal dimension sqm 1005 breaking of existing brick work at all levels including plastering, removing the rubbish up to a distance of 500 m including transportation, loading, unloading etc. all complete as directed by the engineer. cum 5.0 0.0127701221 1006 providing and encasing of structural steel member with masonary work around flanges, webs etc. and filling the gap between steel and masonry by minimum 12mm thick mortar of 1:6. encased member shall be wrapped with chicken wire mesh with 50mm lap etc. complete as per specification. (chicken wire mesh to paid separately) cum 4.0 0.0372608783 1007 providing and laying 75 mm thick bed of dry brick aggregate including of excavation, disposal of surplus earth spreading of earth, ramming, watering etc. complete in all respects as directed by the engineer. sqm 4.0 0.0011953629 1008 making openings in existing brick wall or partition wall including making good the broken edges/surface with cement mortar 1:6 etc. complete. cum 5.0 0.0144760467 1009 supply and placing in position mild steel wire fabric of square mesh 25 mm size and wire diameter of 2 mm for encasing of steel sections in concrete including cutting, bending, fixing etc. complete. sqm 5.0 0.0036347135 1010 filling existing brick wall/ partition wall opening at all level including making good the broken edges/surface with cement mortar 1:6, painting, finishing to match with existing finishing, scaffolding/supporting at all level, removal of debris upto a lead of 1 km including loading, unloading, transportation etc. all complete. sqm 5.0 0.0077293378 1011 providing and filling brick bats in soak pits all complete. cum 5.0 0.0105556618 1100 damp proof course damp proof course: damp proof course including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, shuttering, centering, curing etc at all level as per specification, drawings and as directed by engineer in charge for the following: a1101 providing damp proof course of following thickness with m20 concrete (10mm and down graded aggregate) with 2% of approved admixture of water proofing compound all complete. two layers of hot bitumen coating 85/25 grade as per is:702 @ 1.7kg./sqm shall be applied one before & one after the dpc etc. all complete as per specification. b 50mm thick sqm 46.0 0.0448119246 1200 cement mortar plaster plastering: cement mortar plaster including making grooves wherever required including all labour, material (unless otherwise specified in boq/contract specification), scaffolding, curing etc at all level as per specification, drawings and as directed by engineer in charge for the following: a1201 providing 18mm thick plaster consisting first (base) layer of 12mm thick plaster in cement sand mortar 1:6 and second (finish) layer of 6mm thick plaster in cement sand mortar 1:4 including providing 3mmx3mm size grooves at junctions of two dissimilar materials all complete as per specification. sqm 1926.0 1.1057126634 1202 providing 12mm thick plaster inside the building/boundary wall in cement mortar 1:6 on walls finished to a smooth finish as per specification all complete. sqm 2740.0 1.0874540023 a1202 providing 12mm thick plaster inside the building/boundary wall in cement mortar 1:4 on walls finished to a smooth finish as per specification all complete. sqm 1094.0 0.4326139721 1203 providing 12mm thick plaster in cement mortar 1:6 on walls with rough finish all complete. sqm 80.0 0.0302649666 1204 providing 6mm thick plaster on ceiling in cement mortar 1:4 finished to a smooth all complete. sqm 1690.0 0.6519306386 1205 providing 12mm thick plaster in walls, drains/culverts with a paste of neat cement @ 1kg/sqm and rubbed smooth with trowel etc. all complete. sqm 280.0 0.1001835632 1207 forming groove of uniform size from 12x12 mm upto 25x15 mm in plastered surface as per approved pattern, using wooden battens nailed to the under layer, including removal of wooden battons, repair of the edges of plaster panel and finishing the groove etc. complete as per specification, drawing and the instructions of engineer in charge. rm 1208 providing and laying encasement to box type steel beams at all levels with lath plaster 50 mm nominal thickness with cement plaster (1:4) over chicken wire mesh including all labour, materials, equipment, handling, transporting, mixing, placing, leveling, curing and cleaning, finishing the exposed surfaces etc including centering and shuttering all complete as per specification, drawing and instructions of enginner in charge (chicken wire mesh to be paid separately) sqm 1209 ruled pointing in masonry in cement mortar 1:3 (1 cement and 3 fine sand) including raking out joints, curing etc. complete. sqm a1210 providing drip course in cement mortar (1:3) in parapet, chajjas, window/door heads, architectural facias, fins etc. all complete. rm 204.0 0.0170815325 1300 finishes to concrete / plastered surfaces finishes to concrete / plastered surfaces: finishes, painting to concrete, plastered surfaces including all labour, material (unless otherwise specified in boq/contract specification), equipment, surface preparation, scaffolding etc. at all level as per specification, drawings and as directed by engineer in charge for the following: 1301 two or more coats of white wash/ colour wash as per is 627 of approved brand and manufacture to give an even shade including a priming coat as per specifications. sqm 10.0 0.0007617906 1304 two or more coats of acrylic distemper of approved brand and manufacture to give an even shade including a priming coat with distemper primer complete. sqm 1805.0 0.3097104106 1305 providing and applying two or more coats of acrylic emulsion paint as per is 5411 of approved brand, shade and manufacture to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guideline. sqm 1485.0 0.3770458078 1306 providing and applying 2 or more coats of acid/alkali resistant paint of approved brand and colour to floors, walls and ceiling including preparation of surface to receive paint, providing and applying bitumen primer confirming to is 158 complete all as per manufacturers recommendations and as approved by engineer, at all heights above or below grade level, complete as per specifications. sqm 178.0 0.1430666989 1307 providing and applying two coats of epoxy coating with suitable pigments of approved shade as per specification and direction of engineer. the epoxy paint shall be a two pack material and shall be resistant to water, oil, splash, spillage & acidic environment. the epoxy paint coating shall be of minimum 150 micron thickness over epoxy primer. sqm 5.0 0.0024069340 1308 providing and applying 2 or more coats of chlorinated rubber paint of approved brand and colour to floors, walls and ceiling including preparation of surface to receive paint, providing and applying chlorinated rubber zinc phosphate primer confirming to is 158 complete all as per manufacturers recommendations and as approved by engineer, at all heights above or below grade level, inclusive of intermediate coat of titanium dioxide / micaceous iron oxide complete as per specifications. sqm 5.0 0.0020787157 1309 two or more coats of fire resistant transparent paint (@3.5 litre per sqm per coat) as per is 162 on all woodwork over french polish as per is 348 or flat oil paint as per is 137 of approved grade and manufacture to give an even shade as per specifications. french polish payment will be made seperately. sqm 10.0 0.0062098087 1314 providing and applying resin bonded granular textured finish, for external applications shall consist of crushed stone/quartz chips of .5 mm to 2.5 mm size and of approved natural color/shade and bonded with synthetic resins, adhesives and additives altogether in a single pack mix, applied on cured and dried plaster surface with a dry film nominal thickness of 2.5 mm. the final finish shall have uv resistance, fungus, bacterial resistance properties all complete with grooves filled with poly sulfide sealant of matching color and shade as per specification/drawing/approval of engineer in charge. sqm 1660.0 2.3902090625 1316 providing and applying 2 mm thick plaster of paris punning on walls including preparation of surface, staging, etc. to achieve a smooth even surface all complete as per specification and as directed by engineer. sqm 10.0 0.0018801639 1317 providing and applying 2 mm thick white cement punning on walls including preparation of surface, staging, etc to achieve a smooth even surface all complete as per specification and as directed by engineer. sqm 550.0 0.1119001451 a1317 providing and applying 2 mm thick polymer based water resistant putty on walls including preparation of surface, staging, etc to achieve a smooth even surface all complete as per specification and as directed by engineer. sqm 786.0 0.1803620199 1319 providing and applying two or more coats of acrylic based weather coat paint of approved brand and manufacture and required shade over one coat of primer after necessary cleaning/ washing, preparing the surface using coir brush/ wire brush, sand paper, including filling of cracks with putty wherever required etc. all complete to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guidelines. the final finished coating shall be fungus resistant, uv resistant, water repellant and extremely durable with color fastness as per specification. sqm 5.0 0.0017545495 a1319 providing and applying two or more coats of acrylic smooth exterior paint with silicon additives of approved brand and manufacture and required shade over suitable primer after necessary cleaning/ washing, preparing the surface using coir brush/ wire brush, sand paper, including filling of cracks with putty wherever required etc. all complete to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guidelines. the final finished coating shall be fungus resistant, uv resistant, water repellant and extremely durable with color fastness as per specification. sqm 50.0 0.0184207441 1320 providing and applying acid alkali and oil resistant high build, solvent free, self smoothing, seamless epoxy based amine cured floor finish 150 microns over primer on c.c. flooring. sqm 10.0 0.0080129832 1400 flooring and skirting flooring and skirting: flooring and skirting at all level including base layer, labour, material (unless otherwise specified in boq/contract specification), equipments, transportation, handling, curing, polishing etc. at all level as per specification, drawings and as directed by engineer in charge for the following: (bhel will not supply rmc for this item) 1401 providing and laying 50 mm thick heavy duty cement concrete in flooring with metallic hardener pigmented topping 12mm thick uniform graded treated iron particles in flooring. under layer of 38mm thick cement concrete mix 1:2:4 (1 cement: 2 sand : 4 stone aggregates 12.5 mm well graded) and top layer of 12mm thick metallic concrete of mix 1:2 (1 cement hardner mix with approved quality metallic hardening compound :2 stone aggregate 6mm nominal size) by volume including cement slurry, rounding off edges, aluminium strips etc. all complete for following (quoted item rate shall be inclusive of providing glass joint strips): sqm 450.0 0.4733738193 a1401 providing and laying 50 mm thick heavy duty cement concrete in flooring with metallic hardener pigmented topping 12mm thick uniform graded treated iron paricles in flooring. under layer of 38mm thick m20 grade cement concrete mix (with stone chips of size 12.5mm well graded) and top layer of 12mm thick metallic concrete of mix 1:2 (1 cement hardner mix with approved quality metallic hardening compound :2 stone aggregate 6mm nominal size) by volume including cement slurry, rounding off edges, aluminium strips etc. all complete for following (quoted item rate shall be inclusive of providing glass joint strips): sqm 1800.0 2.4122584420 1402 providing and laying 25 mm thick heavy duty cement concrete mix 1:2:4 (1 cement: 2 sand : 4 stone aggregates ) flooring with metallic hardener pigmented topping of 10 mm thick uniform graded treated iron particles in skirting and dado. under layer of 15mm thick cement concrete mix 1:2:4 (1 cement: 2 sand : 4 stone aggregates 12.5 mm well graded) and top layer of 10mm thick metallic concrete of mix 1:2 (1 cement hardner mix with approved quality metallic hardening compound :2 stone aggregate 6mm nominal size) by volume including cement slurry, rounding off edges, aluminium strips etc. all complete as per specification. (quoted item rate shall be inclusive of providing glass joint strips). sqm 10.0 0.0100349698 a1404 providing and laying interlocking m35 grade concrete blocks in paving with approved colour and pattern and should be laid on the subbase and bedding of sand minimum 50mm thick as per specifications and recommendations of manufacturer.(inclusive of cost of cement for paver manufacturing). b 80mm sqm 10.0 0.0195958466 1406 providing and laying polished kota stone 18mm to 20mm thk in flooring. under bed shall average 30mm thk of 1 cement : 2 sand : 4 stone aggregates by volume and brought to proper level. the kota stone slabs/tiles laid over under bed, pressed and tapped down with wooden mallet to the proper level, lifted and pressed again with thick cement slurry @4.4kg/sqm spread over the surface with fine joint finished including pigments, curing, grinding, granite polishing etc. all complete. sqm 200.0 0.6414803309 1412 providing and laying 18 20mm thick polished granite stone of approved color and texture in flooring with brass/ stainless steel strips. under bed shall average 30 mm thick of 1 cement : 2 sand : 4 stone aggregate by volume and brought to proper level. the granite stone slabs/tiles laid over under bed, pressed and tapped down with wooden mallet to the proper level, lifted and pressed again with thick cement slurry @3.3kg/sqm spread over the surface with fine joint finished including pigments, curing, grinding, granite polishing etc. all complete. sqm 50.0 0.6428560112 a1416 providing and laying vitrified ceramic tiles of mirror polished variety of size 600x600 from reputed / approved manufacturer, complete including underbed of cement mortar 1:3 minimum 18mm thick underbed for flooring and 12mm thick underbed for dado/skirting with neat cement slurry @3.3kg/sqm , 3 mm groove joint pointed neatly with 3x4mm stainless epoxy grout sp 100 of laticrete or approved equivalent etc. all complete for following b 10mm thick tiles in flooring sqm 50.0 0.1824164232 1417 providing and laying vitrified ceramic tiles of matt finish of size 600x600mm from reputed / approved manufacturercomplete including underbed of cement mortar 1:3 minimum 20mm thick underbed for flooring and 12mm thick underbed for dado/skirting with neat cement slurry @3.3kg/sqm etc. all complete for following b 10mm thick tiles in flooring sqm 10.0 0.0318391987 d 10mm thick tiles in skirting and dado upto specific height sqm 10.0 0.0320134380 a1419 providing and laying granite stone slab of 18mm thickness single piece for wash basin / sink slab /facia of black or approved colour with cutting,making corners,moulding and opening etc. all complete. sqm 5.0 0.0725301605 a1421 providing and laying heavy duty dust pressed (grade 5) ceramic tiles (matt finish) of size 300x300mm(approved size) and 7mm thick of reputed / approved manufacturer (kajaria,jhonson,spartek or equivalent) of approved finish, shade and colour. the tiles shall be scratch resistance of minimum 5 on mohrs scale and shall have a bending strength of 350 kg./sqm,with under bed shall average 43mm thk of 1 cement : 2 sand : 4 stone aggregates by volume and brought to proper level including cement mortar with neat cement slurry @3.3kg/sqm all complete. sqm 15.0 0.0501707971 a1422 providing & fixing 12mm thick acid / alkali resistant (chemical resistant) tiles confirming to is:4457 in flooring/dado and shall be laid over bitumastic lining of min 12mm thick (to be laid in layers of 6mm each). the tiles shall be applied with 6mm thick potassium silicate bedding mortar as per is:4441, 4443 & 4832, 6mm ythick pointing of joints of tiles with acid/alkali resistant epoxt/furane mortar up to a depth of 20mm and bituminastic end sealing and including preparation of surface, application of bitumen primer, curing etc. all complete as per specification. the tiles should be abrasion resistant & durable. sqm 5.0 0.0164088877 a1422 providing & fixing acid / alkali resistant (chemical resistant) tiles confirming to is:4457 in flooring/dado and shall be laid over bitumastic lining of min 12mm thick (to be laid in layers of 6mm each). the tiles shall be applied with 6mm thick potassium silicate bedding mortar as per is:4441, 4443 & 4832, 6mm thick pointing of joints of tiles with acid/alkali resistant epoxy/furane mortar up to a depth of 20mm and bituminastic end sealing and including preparation of surface, application of bitumen primer, curing etc. all complete as per specification. the tiles should be abrasion resistant & durable. a 12mm thick acid / alkali resistant (chemical resistant) tiles in dado sqm 47.0 0.1542403025 b 20mm thick acid / alkali resistant (chemical resistant) tiles in flooring sqm 34.0 0.2324535017 1428 providing and laying 3mm thick antistatic pvc flooring / skirting of approved shade,as per is:3462 and laying as per is:5318 all complete. sqm 10.0 0.0076503222 1429 providing and fixing removable type flooring system consisting of fire resistant particle board of size 600x600x35 mm with 0.05 mm thick aluminium foil lining at bottom and with 2 mm thick anti static pvc topping including proprietary floor supporting system complete as per specification. sqm 1600 false ceiling false ceiling: false ceiling including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation, handling, suspension system etc at all level as per specification, drawings and as directed by engineer in charge for the following: a1602 providing, fixing and laying light weight mineral fibre tile false ceiling of minimum thickness 15 mm and exposed surface semi perforated with depth of perforation as 4 mm and humid resistance of 95% rh and fire performance of class 0/1 as per bs 476 with metal suspension grid system with galvanized tees of section 24 x 38 mm for main runners of approved colour and make as per specification including 50mm thick mineral wool insulation (density48kg/cum) as per is:8183 backed with 0.05 mm thick aluminium foil & 24 g x 25 mm mesh wire netting and shall be fixed to ceiling with 24 g wire ties and suitable fixing arrangements. additional hangers and height adjustment clips shall be provided for return air grills, light fixtures. a.c. ducts etc. suitable m.s. channel (minimum mc 75 @ 1.2m) grid shall also be provided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, ac ducts etc. complete with cut outs etc. the size of tiles shall be 600 x 600 mm or 600 x 1200 mm. required ms channel shall be measured & paid extra under respective item unit rate. sqm 207.0 0.7895391892 a1603 providing and fixing permanently colour coated aluminium false ceiling of approved colour and luxalon 84 c or approved equivalent with corrosion resistant aluminium alloy panels of minimum thickness 0.5mm including 50mm thick mineral wool insulation(density 48 kg/cum) conforming to is:8183 backed with 0.05 mm thick aluminium foil & 24 g x 25 mm mesh wire netting and shall be fixed to ceiling with 24 g wire ties and suitable fixing arrangements. additional hangers and height adjustment clips shall be provided for return air grills, light fixtures, a.c. ducts etc all complete. suitable m.s. channel grid with minimum mc 75 shall also be provided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, ac ducts etc. ( materials for structural platform grid made up of ms channels/ beams / angles shall be supplied by bhel and shall be paid under st no a2301) sqm 1.0 0.0048969356 a1604 providing, fixing and laying permanently colour coated aluminium false ceiling of approved colour with stove enamel finsih of approved make in linear and square type with corrosion resistance aluminium alloys panels of minimum thickness 0.5mm including 50mm thick mineral wool insulation (as per is:8183)backed with 0.05 mm thick aluminium foil & 24 g x 25 mm mesh wire netting and shall be fixed to ceiling with 24 g wire ties and suitable fixing arrangements.. additional hangers and height adjustment clips shall be provided for return air grills, light fixtures etc. suitable m.s. channel (minimum mc 75) grid 1200 mm c/c maximum shall also be provided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, ac ducts etc. the work to be complete as per specifications, drawings and direction of engineer. (structural steel works for platform for movement is separately payable under relevant items of boq) sqm 1.0 0.0045869517 1700 rain water down take pipes rain water down take pipes: rain water down take pipes at all level including all labour, material (unless otherwise specified in boq/contract specification), transportation, 2 coats of approved paint over one primary coat, fixtures, accessories etc as per specification, drawings and as directed by engineer in charge for the following: a1704 providing and fixing galvanised ms down take pipes conforming to is: 1239/is: 3589 of 150 mm dia medium quality as per is:1239(part i) all complete as per specification. (galvanising shall be as per is: 4736. the minimum mass of zinc coating shall not be less than 400 gms/sq.m. as per is:6745. the zinc coating shall be smooth and shall be subjected to testing as per is: 2633, for uniformity of coating. the zinc coating shall be free from all defects as per is: 2629. all rain water down comers shall be provided with roof drain heads and complete with shoes bends, junctions, sockets, adapters, brackets and finished with anticorrosive painting over a coat or primer. downcomers shall be provided with 45 x 45 cm size khurras having minimum thickness of 30 mm with m 15 concrete over pvc sheet of 1mx1mx400micron and finished with 12 mm thick cement sand plaster 1:3.the rainwater down comers shall be provided with suitable c.i. grating at inlet point etc. all complete as specification. rm 107.0 0.4925300155 1705 providing and fixing upvc down take pipes of 110mm diameter class 3 as per is:4985 all complete. rm 10.0 0.0095851892 1706 providing and fixing upvc down take pipes of 160mm diameter class 3 as per is:4985 all complete. rm 10.0 0.0147130933 1710 providing and fixing galvanised erw steel down take pipes of medium duty as per specification of following diameters. c 273mm od and 4mm thick rm 10.0 0.0847390699 1800 miscellaneous works miscellaneous: miscellaneous works including all labour, material (unless otherwise specified in boq/contract specification), equipment etc. at all level unless otherwise specified as per specification, drawings and as directed by engineer in charge for the following: a1801 providing and filling in trenches, plinths, area paving and other underground structures with graded stone aggregate of size range 63 mm to 45 mm (complying irc specification) in layers not exceeding 200 mm compacted thickness including breaking of stone boulders to required sizes, filling the interstices with selected moorum/non expansive soil sand and compacting to 85 % of original volume of stone stack for all lifts etc. all complete. payment shall be made for the measurement of the volume of the compacted fill. cum 1399.0 4.9942057318 b1801 providing and filling in trenches, plinths, area paving and other underground structures with graded stone aggregate of size range 63 mm to 45 mm in layers not exceeding 200 mm compacted thickness including breaking of stone boulders to required sizes, filling the interstices with selected moorum and compacting to 90 % of original volume of stone stack for all lifts etc. all complete. payment shall be made for the measurement of the volume of the compacted fill. cum 20.0 0.0749674851 1802 supply and laying approved quality stone aggregate 40mm size in transformer yards. cum 20.0 0.1032692201 1804 providing and fixing weep holes in retaining wall, drains, etc consisting of 100 mm dia hdpe pipe sleeves with single side covering for the pipe mouth with galvanised welded wire fabric of 20 mm sq. opening all complete. each 10.0 0.0045160403 1807 anti termite chemical treatment of soil with chlorpyriphos/lindane e.c. 20% with 1% concentration conforming to is:8944 and as per is 6313 all complete. (plinth area of building at ground floor only shall be measured for payment). sqm 1296.0 0.4819034423 1808 laying of earthing mats/rods including risers, transportation from yard stores, loading, unloading, cutting to length, welding, protective painting of joints etc. all complete. (excavation & back filling shall be paid separately under respective item of earth work. earthing mats/rods shall be supplied by bhel free of cost) mt 10.0 0.2018116919 1809 construction of below ground earthing system test pits as per drawing / sketches including concreting, reinforcement, formwork, providing & fixing gi strip etc as per drawing and specification (excavation & backfilling only will be paid under applicable boq items). each 10.0 0.2202729569 1810 construction of below ground earthing system test links as per drawing/ sketches including concreting, reinforcement, formwork, providing & fixing gi strip etc as per drawing & specification (excavation & backfilling only will be paid under applicable boq items. each 10.0 0.1650512452 1811 construction of below ground earthing system earth electrodes as per drawing and specification. ( excavation and backfilling only will be paid under applicable boq items) each 10.0 0.0126688202 1812 construction of below ground earthing system earth connection and riser pig tails as per drawing and specification. ( excavation and backfilling only will be paid under applicable boq items& steel shall be supplied by bhel free of cost.) each 10.0 0.0084465555 1813 providing earthing pit as per drawing with charcoal & salt, gi pipes, gi earth electrodes, gi wire, gi strips, brick chamber with covers including associated earthwork etc. all complete. each 10.0 0.6908852853 1814 construction of below ground earthing system test pits as per drawing/ sketches including brickwork, plaster, concreting, reinforcement, formwork, providing & fixing gi strips/pipes, gi wires, covers etc as per drawing & specification including associated earthwork. each 10.0 0.4027744736 1815 providing and fixing gi rungs in concrete/brick walls having zinc coating of minimum 900 g/sqm etc. all complete. kg 10.0 0.0020179346 1818 fire proofing of steel structures with vermiculite cementious coating including supply of all materials for vermiculite materials, reinforcement mesh (3mm thick wire, 50x50 size mesh) , nuts, tie wires, weldings, suface preparation, curing, staging, compatible paintings etc. all complete. cum 1.0 0.2002820327 1819 supply & fixing expanded metal steel sheet conforming to is:412. size of mesh shall be 10mmx40mm with strands of 2.5mm width and 1mm thickness to the structural steel for facilitating fireproofing works. sqm 10.0 0.0068257245 1821 sprinkling of water by water tanker fitted with perforated gi pipe (portable tanker minimum 3000 litre capacity) for roads and miscellaneous area within plant boundary, for dust supression and reduction of suspended material at site for day to day work, as directed by bhel site engineer (water for this purpose shall be provided by bhel free of cost and utilisation of machine will be in terms of tank hour put in actual use for water sprinkling). tank hr 1822 providing & filling bentonite powder (sodium base) mixed with water in electronic earthing pit as per drawing & direction below ground level including all materials, transportation, labour, incidental etc all complete as per specification. cum 2.0 0.0400547857 1823 providing and laying cinder filling in the toilets,roads,etc complete as directed by engineer in charge. cum 2.0 0.0095142779 1824 disposal of scrap steel, scrap wood, broken packing crates, cable scrap, debris and other civil waste, electrical waste materials etc. from project site to a designated place within 5 km range, with all manpower t & p etc. including loading and unloading as and when directed by bhel. a steel scrap / metal scrap mt 1.0 0.0014324094 b debris & other waste materials. cum 1.0 0.0002714892 1832 providing and fixing sliding layer of bitumen paper or craft paper over the screed layer for water retaining structures to destroy the bond between the screed and the base slab concrete of the water retaining structure etc all complete. sqm 20.0 0.0009036133 a1839 providing bore wells in ground with perforated/non perforated pvc pipe of standard approved make for rain water harvesting by means of mechanical equipment including pipe, drilling inside earth, weathered rock, sandstone, shale etc. upto required depth at locations shown in drawing etc all complete. depth of borewell shall vary from 6m to 15m. payment shall be made cumulative diamterwise as per actual length of bore well and diameter as mentioned below. (a) 200 mm diamter rm 4.0 0.0037198071 (b) 300 mm diamter rm 4.0 0.0046517849 a1840 supply & packing uniformly 6mm to 3mm size gravel in the bore hole surrounding the perforated pvc pipe. cum 1.0 0.0065441051 a1841 supply & packing uniformly downgraded 40mm size gravel at all depth in the pit/well dug for rain water harvesting. cum 1.0 0.0065441051 a1842 supply & packing uniformly downgraded 40mm size pebbles at all depth in the pit/well dug for rain water harvesting. cum 1.0 0.0065441051 a1843 supply & laying coarse sand layer at all depth in the pit/well dug for rain water harvesting. cum 1.0 0.0054034453 a1844 supply and fixing of bar screen of 5 mm square m. s. bar at inlet point of rain water collecting tanks with 50 mm x 50 mm opening etc all complete sqm 2.0 0.0005429784 a1845 supply & fixing 150mm dia perforated pvc pipe isi mark 6 kg/ cm2 with air vent at top as per the drawing & specification complete. rm 8.0 0.0143484063 a1846 providing & fixing 150 dia pvc pipe isi mark 6 kg/cm2 as per specification. rm 8.0 0.0143484063 a1847 supply & fixing netlon jali/ pvt net in the well dug for rain water sqm 8.0 0.0025062099 a1849 providing 50mm thick premix carpet surfacing laid to slope in two layers 30mm and 20mm respectively with 12mm downgraded stone chips mixed with 80/100 grade bitumen @ 52 kg/cu.m including compaction etc. all complete as per specification. sqm 100.0 0.1748977934 a1850 providing 50mm thick anti corrosive layer laid to required slope consisting of clean & well graded coarse sand mixed with a90 grade bitumen for softening point upto 45 degree celcius or a65 grade bitumen for softening point above 45 degree celcius as per is: 73 or its equivalent quality 8 to 10% by volume and rolled or compacted all complete as per specification. sqm 100.0 0.1489320811 2000 fencing and gates fencing and gates: fencing and gates including all labour, material (unless otherwise specified in boq/contract specification), equipment etc at all level as per specification, drawings and as directed by engineer in charge for the following: 2001 supplying and erecting in position 2.4 m high pvc coated gavanised chain linked fencing of minimum 8 gauge (including pvc coating ) of mesh size 75mm x 75mm. the diameter of the hot dip galvanised steel wire for chain link fencing excluding pvc coating shall not be less than 12 gauge. gi barbed wire fencing of height of 600 mm confirming to is 298 at top of chain link fencing shall be provided with 4 strands of barbed wire hot dip galvanised wire of 12g comprising of 2 ply of wires with barbs of 16g spaced at 100mm. cost to include for gi hook bolts, rings & washers, hot dip galvanised tension wires, 25x6 mm gi flat stretcher bar at end posts, rm 20.0 0.1047036556 accessories etc. all complete. (structural post shall be paid separately under item 2007) 2003 supplying and erecting in position 2.4 m high pvc coated gavanised chain linked fencing of minimum 8 gauge (including pvc coating ) of mesh size 75mm x 75mm. the diameter of the hot dip galvanised steel wire for chain link fencing excluding pvc coating shall not be less than 12 gauge. concertina of height of 600 mm at top of chain link fencing shall be provided with all accessories. concertinal shall be from tensile serrated galvanised wire (htsw) made with wire diameter of 2.5 mm which will be stretched to 6m and attached on two strands of galvanised htssw (high tensile spring steel wire) of 2.5mm dia by means of clips at 1m interval. these two htssw strands will be attached to the fence posts/ angles with 12 mm security fasteners. cost to include for gi hook bolts, rings & washers, hot dip galvanised tension wires, 25x6 mm gi flat stretcher bar at end posts etc. all complete. (structural post shall be paid separately under st no. 2007) rm 4.0 0.0195269613 2004 supplying and erecting in position 2.4 m high gavanised chain linked fencing conforming to is 2761 of 10g hot dip galvanised steel wires woven in the form of zigzag mesh giving an opening size of 50 mm square. concertina of height of 600 mm at top of chain link fencing shall be provided with all accessories. concertinal shall be from tensile serrated galvanised wire (htsw) made with wire diameter of 2.5 mm which will be stretched to 6m and attached on two strands of galvanised htssw (high tensile spring steel wire) of 2.5mm dia by means of clips at 1m interval. these two htssw strands will be attached to the fence posts/ angles with 12 mm security fasteners. cost to include for gi hook bolts, rings & washers, hot dip galvanised tension wires, 25x6 mm gi flat stretcher bar at end posts etc. all complete. (structural post shall be paid separately under st no. 2007) rm 4.0 0.0257003013 2005 supplying and fixing 600mm high g.i. barbed wire fencing on top of boundary wall consisting of min. 6 nos. strands of barbed wire hot dip galvanised wire of 12g comprising of 2 ply with barbs of 16g spaced at 100mm including gi clips, anchors, accessories etc. all complete. (structural post shall be paid separately under st no. 2007/ 2008 as the case may be) measurement shall be for per running meter of fencing. rm 4.0 0.0005672908 2006 supplying and fixing 600mm high concertina on top of boundary wall including gi tension wires, clips, anchors, accessories etc. all complete. concertinal shall be from tensile serrated galvanised wire (htsw) made with wire diameter of 2.5 mm which will be stretched to 6m and attached on two strands of galvanised htssw (high tensile spring steel wire) of 2.5mm dia by means of clips at 1m interval. these two htssw strands will be attached to the fence posts/ angles with 12 mm security fasteners. (structural post shall be separately under st no. 2007) rm 45.0 0.0225173945 2007 supply and fixing of hot dip galvanised mild steel posts for fencing. rate of zinc coating shall not be less than 710 g/m2 on steel posts. mt 1.0 0.1794158598 2008 supply, fabrication and fixing of mild steel posts for fencing including painting etc all complete. mt 0.5 0.0846134555 a2008 supply, fabrication and fixing of pre cast rcc of minimum m20 grade 3m high fence post including making arrangements for fixing of chain link fencing (covered in item no. 2001 above), painting etc. all complete as per specification. each 1.0 0.0021901479 2009 supply, fabrication and installing in position and testing galvanised ms gates out of channels, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, ms aldrops with locking arrangement, tempered steel pivot, guide track of ms tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete. mt 0.5 0.1002848651 a2009 supply, fabrication and installing in position and testing steel gates, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, aldrops with locking arrangement, tempered steel pivot, guide track tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete as per specification. mt 0.5 0.1002848651 2010 supply, fabrication and installing in position and testing ms gates out of channels, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, ms aldrops with locking arrangement, tempered steel pivot, guide track of ms tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete. mt 1.0 0.1915376495 2100 water supply water supply: water supply work including men, material (unless otherwise specified in boq/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer in charge for the following: 2101 providing and fixing in position tested heavy duty type chromium plated (cp) brass long neck bib cocks including sockets, union, nuts etc all complete 15mm nominal bore. each 8.0 0.0113681033 2103 providing and fixing in position heavy duty brass full way valve with wheel of approved quality including all specials etc all complete for following sizes: a 25mm nominal bore. each 10.0 0.0115544989 b 50mm nominal bore. each 5.0 0.0102395997 2104 providing and fixing gi pipes class b medium class conforming to is:1239 pipes shall be concealed and painted with anticorrsive paint, complete for internal works with gi sockets, unions, elbows, tees, nipples etc and clamps including cutting and making good the walls etc all complete for following sizes: a 15 mm nominal bore. rm 30.0 0.0242233191 b 20 mm nominal bore. rm 80.0 0.0730954253 c 25 mm nominal bore. rm 10.0 0.0110236767 d 50 mm nominal bore. rm 2.0 0.0032396359 2105 providing and fixing gi pipes class b complete for external work with gi sockets, unions, elbows, tees, nipples etc including trenching & refilling, anti corrosive paint etc all complete for following sizes: a 15 mm nominal bore. rm 5.0 0.0031606204 b 20 mm nominal bore. rm 5.0 0.0036914426 c 25 mm nominal bore. rm 5.0 0.0046355766 d 50 mm nominal bore. rm 70.0 0.1011459316 a2106 providing and fixing wall to wall mirror of height 450mm & 6 mm thk float glass from reputed mirror manufacturer. mirror shall be mounted with glass adjustable revolving cp brackets with cp screws etc all complete. each 3.0 0.0083594358 a2108 providing and fixing 20 mm diameter stainless steel towel rails (600mm x 20mm) all complete. each 3.0 0.0049800032 2110 providing and fixing c.p. soap holder mounted with c.p. screws etc all complete. each 3.0 0.0029640947 2111 providing and fixing stainless steel / c.p. liquid soap dispenser. dispenser shall be round and easily revolving with removable threaded nozzle and mounted on c.p. brackets etc all complete. each 3.0 0.0044552592 2112 providing and fixing glazed vitreous wall mounted paper holder with suitable cover cum cutter fitted with cp screws etc. sll complete. each 3.0 0.0020483252 2113 providing and fixing chromium plated brass shower rose 100mm dia with 15 or 20 mm inlet dia all complete. each 1.0 0.0003302443 a2114 providing & fixing in position high density polyethylene (cylindrical/vertical) molded seamless type tank of syntex or approved equivalent including making all necessary inlet & outlet pipes, fixture, ball cocks, valves etc all complete for following capacities. gi pipes shall be paid separately under st no. 2105. a 500 litres capacity each 2.0 0.0144395780 b 1000 litres capacity each 2.0 0.0288832081 2116 providing and fixing glass shelves 600mmx127mmx4 mm with chromium plated brackets all complete. each 2.0 0.0006341501 2117 providing and fixing metal storing cabinets all complete. each 2.0 0.0094068978 2118 providing minimum 600 mm long porcelain tray etc all complete.. each 1.0 0.0025082359 2119 providing and fixing recessed porcelain soap tray in shower area etc all complete. each 1.0 0.0007840770 2120 providing and fixing grab bars, barrier free access and appropriate fittings and fixtures for toilets for handicapped etc. all complete. each 1.0 0.0031363080 a2121 providing and fixing electric operated hand dryer with photo voltaic control including fittings, cutting and making good the wall where required etc. all complete. each 1.0 0.0452819656 2200 sanitary works sanitary: sanitary work including all labour, material (unless otherwise specified in boq/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer in charge for the following: a2201 supply and fixing glazed vitreous china wash basin of (oval shape) approved make (with photovoltaic control) conforming to is:2556 part 4 of oval shape with r.s. or c.i. brackets painted white, 15mm chromium plated brass hot & cold faucets with nylon washers, chromium plated brass chain with rubber plug, 32mm chromium plated brass bottle trap and waste of standard pattern, 32mm dia chromium plated brass trap unions, plastic connection pipe with chromium plated nuts, fittings, cutting and making good the walls where required etc all complete. a white each 3.0 0.0815581891 b colored each 1.0 0.0279552824 2202 providing and fixing approved vitreous china laboratory sink of size 600x400x200mm conforming to is:2556 (part 5) with r.s. or c.i. brackets, chromium plated brass chain with rubber plug 40mm, 40mm cp brass waste and 40mm cp brass trap with necessaary union complete including painting the fittings, cutting and making good the wall where required etc. all complete. each 1.0 0.0124540601 a2203 providing and fixing stainless steel kitchen sink of size 600x400x200mm conforming to is: 13983 including all fittings etc. all complete. each 1.0 0.0124743205 2204 providing and fixing colour glazed vitreous china european type water closet conforming to is:2556 with siphon, open front solid plastic seat and plastic cover, low level 12.5 litre pvc flushing cistern (same colour as wc) with valveless fittings, necessary c.p connections etc all complete. b wall mounted each 1.0 0.0272866896 a2204 providing and fixing colour glazed vitreous china european type water closet conforming to is:2556 with siphon, open front solid plastic seat, flush valve and plastic cover, low level 12.5 litre pvc flushing cistern (same colour as wc) with valveless fittings, necessary c.p connections etc all complete. b wall mounted each 1.0 0.0272866896 2205 providing and fixing colour glazed vitreous indian type orissa pattern (580x440mm) water closet conforming to is:2556 part 3 with all fittings including foot rests, low level 12.5 litre pvc flushing cistern with valveless fittings, necessary c.p connections etc all complete. each 1.0 0.0134589753 a2206 providing and fixing white flat back glazed vitreous china lipped urinals of size 440x265x355 mm with photo voltaic control flushing system as per is:2556 (part 6, section 1) with flush pipes, lead pipes, gratings, traps and necessary c.p. fittings,with provision of squatting urinal for ladies toilet etc. all complete. each 1.0 0.0170308816 2207 supply, laying and jointing upvc pipes of class 3 as per is:4985 including bends, branches and all other necessary fittings, m.s holder bats/clamps, cutting and making good the walls and floors, jointing, testing etc all complete for following. a 75mm dia pipes rm 10.0 0.0061632098 b 110mm dia pipes rm 10.0 0.0087909821 c 160mm dia pipes rm 10.0 0.0120063055 d 200mm dia pipes rm 10.0 0.0145814007 a2207 supply, laying and jointing cpvc pipes as per is:15778 including bends, branches and all other necessary fittings, m.s holder bats/clamps, cutting and making good the walls and floors, jointing, testing etc all complete for following. a 75mm dia pipes rm 50.0 0.0323517865 b 110mm dia pipes rm 20.0 0.0184632910 c 160mm dia pipes rm 20.0 0.0252120260 d 200mm dia pipes rm 20.0 0.0306215494 2208 providing, laying light duty non pressure np3 class rcc pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc all complete for following. a 200mm dia rm 25.0 0.0507320098 b 300mm dia rm 50.0 0.1459922989 c 450mm dia rm 25.0 0.1304910765 d 600mm dia rm 25.0 0.1694518013 2209 providing, laying light duty non pressure np2 class rcc pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc complete for following. a 150mm dia rm 20.0 0.0243610897 b 250mm dia rm 20.0 0.0368597226 c 300mm dia rm 8.0 0.0166317519 d 450mm dia rm 8.0 0.0232285340 2210 providing, laying light duty non pressure np3 class rcc pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc complete for following. a 150mm dia rm 10.0 0.0146198955 b 250mm dia rm 10.0 0.0223228947 c 400mm dia rm 15.0 0.0612309425 2211 providing and fixing c.i manhole heavy duty cover of size 600mmx450mm including frame from reputed manufacture etc. all complete. each 5.0 0.1400094065 2212 providing and fixing circular heavy duty c.i. manhole cover of 600 mm dia with frame etc. all complete. each 10.0 0.2929023933 2213 providing and fixing square mouth s.w gully trap grade a complete with ci grating, brick masonry chamber(clay brickwork in 1:6 mortar, 12mm plaster in 1:6 mortar & 1:2:4 cement concrete) and water tight ci cover with 300x300mm (inside). the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72 kg etc all complete for following sizes: 10.0 a 100x100mm p or s type. each 2.0 0.0076543743 b 150x100mm p or s type. each 2.0 0.0079420718 c 150x150mm p or s type. each 4.0 0.0170835586 2214 providing and fixing c.i. floor traps size 100 mm inlet and 100 mm outlet sand cast iron s&s as per is: 1729 with c.p jalli all complete. each 4.0 0.0103510319 2215 providing and fixing 100mm heavy duty upvc floor traps with 100 mm inlet and 100 mm outlet & c.p jalli all complete. each 4.0 0.0099985011 2216 providing and installing approved brand single tap water cooler of 80 l cooling capacity all complete. each 3.0 0.2631804051 2217 providing and installing approved brand single tap water cooler of 150 l cooling capacity all complete. each 5.0 0.5471094728 2218 providing and fixing white viterous urinal partitions of size 675x325x85mm all complete. each 5.0 0.0163359503 2219 providing and fixing eye and face drinking water fountain (combined unit with receptacle conforming to is: 10592) all complete as per specification. each 1.0 0.0625964926 2221 providing, laying spun ci pipes with conforming to is 1536 complete for following.(excavation,backfilling,concrete to be paid seperately) 2.0 c 150mm dia rm 2.0 0.0166114916 d 200mm dia rm 2.0 0.0254612287 f 300mm dia rm 30.0 0.5793822438 2400 road works road works: road works including all labour, material (unless otherwise specified in boq/contract specification), equipment, transportation etc. as per specification drawing, relevant irc & is codes and as directed by the engineer in charge for the following: 2401 preparation of sub grade by excavating earth to required depth for all types of soil/ rock, dressing to camber and consolidating the base including making good the undulation etc and disposal of surplus earth within a lead upto 1 km etc. all complete. cum 140.0 0.0245434332 2402 supplying and filling with selected good earth of approved quality in layers not exceeding 300 mm loose thickness using borrowed soil (borrowed soil to be arranged by the bidder) and compacted so as to achieve at least 95 % maximum dry density as per is 2720 (part vii) including royalty/seignorage fee (if any), sorting, spreading, breaking clods, watering, ramming/compaction by manual/mechanical means, dressing, finishing to required lines, grades and slopes, tesing etc all complete. cum 10.0 0.0074375882 2403 providing, stacking & laying granular morrum for shoulder including watering, compaction with road roller to required camber etc all complete. cum 2405 providing & laying water bound macadam base course in layers of required thickness with stone aggregate 63mm to 40mm size(irc 19 grading 1), stone screening and blinding material including screening sorting, spreading to template and consolidation with road roller including carriage, spreading and consolidation of blinding material moorum etc all complete. cum 200.0 0.9115837103 a2405 construction of granular sub base by providing close graded material conforming to specification,mixing in a mechanical mix plant at omc,carriage of mixed material to work site,for all leads and lifts,spreading in uniform layers of specified thickness on prepared surface and compacting with vibratory power roller to achieve the desired density,complete as per specifications and directions of engineer in charge. cum 160 cum 2406 providing & laying water bound macadam base course with stone aggregate 50mm to 20mm size stone(irc 19 grading 1) screening & binding material including screening, sorting, spreading to template & consolidation with road roller including carriage spreading & consolidation of blinding material moorum etc all complete. cum 20.0 0.1133102681 2413 supplying and laying 400mmx150mmx350mm deep precast concrete kerb stone of grade m 20 with 20 mm nominal size stone aggregate and of shape as per detailed drawing including fixing with cement mortar (1:2) in 13mm thick joints, finishing of joints with neat cement paste, making drainage opening where required etc all complete. rm 90.0 0.0654998061 a2414 supply and laying 200 mm dia r.c.c np 3 type hume pipe in raised shoulders as rain water drains as per detailed drawing including fixing with cement mortar (1:2) in 13mm thick joints, finishing of joints with neat cement paste etc all complete. rm 25.0 0.0507320098 b2414 supply and laying 600 mm dia r.c.c np 3 type hume pipe in raised shoulders as rain water drains as per detailed drawing including fixing with cement mortar (1:2) in 13mm thick joints, finishing of joints with neat cement paste etc all complete. rm 50.0 0.3389036027 a2415 supply and laying 150mm dia r.c.c np 3 type hume pipe in raised shoulders as rain water drains as per detailed drawing including fixing with cement mortar (1:3) in 13mm thick joints, finishing of joints with neat cement paste etc all complete. payment terms a) on receipt of materials at site 50%; b) on completion of erection & fixing 50%. rm 50.0 0.0572477504 2416 dismantling of existing road consisting of premix carpet, kerb stone/ brick on edge, bitumen macadem course, wbm, prepairing subgrade to receive new wbm including camber consolidation including disposal of debris within a lead of 1 km etc all complete. sqm 10.0 0.0026176420 providing and placing concrete work in road including cost of labour, materials (unless otherwise specified in boq/contract specification) and equipment for handling, transportation, batching, mixing, placing, vibrating and curing (excluding cost of centering, shuttering and reinforcement) with mechanised equipments like batching plant, transit mixer, concrete pump etc. complete as per drawing, specifications and as per direction of engineer in charge for the following: 2418 concrete of grade m10 (1 part cement, 3 part sand, 6 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors at any depth below finished floor level etc (rmc shall be provided free of cost as per tcc). cum 20.0 0.1575083030 a2419 providing and laying (using fully mechanised paver)cement concrete of grade m35 using 20 mm nominal size stone aggregate with approved admixture (if required), provision for necessary joints including compaction, finishing to lines and grades, curing and providing & fixing forwork etc. all complete. (excluding the cost of reinforcement and dowel bar) (rmc shall be supplied free of cost as per tcc) cum a2420 supplying and filling sand for preparation of road sub base/ sub grade in layers not exceeding 300 mm thickness and compacted so as to achieve at least 80% relative density as per is 2720 (part xiv) including spreading, watering, ramming/ compaction by manual/ mechanical means, dressing, royalty (if any) etc all complete. cum 5.0 0.0217535779 a2421 providing & laying dry lean cement concrete of grade m15 with 20 mm nominal size graded stone aggregate over a prepared sub grade including compaction, finishing, curing etc all complete. (rmc shall be supplied free of cost as per tcc) cum 2.0 0.0023704653 b2421 providing & laying dry lean cement concrete of grade m10 with 20 mm nominal size graded stone aggregate over a prepared sub grade including compaction, finishing, curing etc all complete. (rmc shall be supplied free of cost as per tcc) cum 10.0 0.0118543526 a2423 providing and fixing separation membrane of impermeable plastic sheeting of 125 microns thick laid flat without creases etc. all complete sqm 360.0 0.0202036582 reinforcement 2425 providing and fixing in position ms dowel bar reinforcement including surface painted with bitumen and greasing, dowel end caps with cotton fills etc all complete as per specification, drawing and as directed by engineer. (bhel will supply ms dowel bar free of cost as per tcc) mt 2.0 0.3388549777 2426 providing, straightening, cutting, bending, placing in position at any level, binding in position of steel reinforcements of tmt steel of grade fe 500 confirming to is:1786 including cost of binding wire, labour, scaffolding, transportation to & from stores etc all complete as per specification, drawing and as directed by engineer. (bhel will supply tmt free of cost as per tcc) mt 10.0 0.2511092663 2427 providing, straightening cutting, bending, placing in position at any level, binding in position of steel reinforcement of mild steel reinforcements including cost of binding wire, labour, scaffolding transportation to & from stores etc all complete as per specifications, drawings and as directed by engineer. (bhel will supply reinforcement free of cost as per tcc) mt miscellaneous 2428 providing & installation of bitumen impregnated fibre board of specified thickness confirming to is 1838 as joint filler including nailing, coating of both faces with coal tar pitch/bitumin etc. all complete as per specification, drawing and as directed by engineer. rm 10.0 0.0368455404 2429 providing and filling in position hot applied bitumen sealing compund (grade a) of specified thick confirming to is 1834 including cleaning, mixing, heating, pouring/injecting sealing compound in gaps in joints, sealant primer etc all complete as per specification, drawing and as directed by engineer. rm 200.0 0.0065319489 2430 providing and laying debonding strip/tape of specified thickness before applying sealant including cleaning etc all complete as per specification, drawing and as directed by engineer. rm 10.0 0.0017525235 2431 providing & laying 75 mm thick precast interlocking concrete pavers of approved colour and pattern as per specification and recommendation of manufacturer. sqm 10.0 0.0183721192 2432 providing and laying 50mm thick sand layer below concrete pavers including compaction etc all complete as per specification, drawing and as directed by engineer. sqm 10.0 0.0013999928 total for pkg b 100...

National Thermal Power Corporation Limited - Chhattisgarh

37366669 end to end contract for transportation of 3, 00, 000 mt coal from mcl end to end contract for transportation of 3, 00, 000 mt coal from mclmines in talcher area to ntpc solapur under rail ship rail ( rsr ) modeexcluding railway freight...

National Thermal Power Corporation Limited - Chhattisgarh

32861245 job contract for transportation of fly ash from fly ash silos of ntpcsingrauli to different locations including fly ash based bricksmanufacturing plants situated within the radius of 100 kms of ntpcsingrauli in closed trucks or bulkers job contract for transportation of fly ash from fly ash silos of ntpcsingrauli to different locations including fly ash based bricksmanufacturing plants situated within the radius of 100 kms of ntpcsingrauli in closed trucks or bulkers...

National Thermal Power Corporation Limited - Chhattisgarh

30783411 service contract for transportation of electrosila generator stator with service contract for transportation of electrosila generator stator withaccessories ( odc consignment ) from kudankulam nuclear plant ( unit 3 ) tontpc barh => limited...

National Thermal Power Corporation Limited - Chhattisgarh

29661792 rate contract for transportation of pond ash from ntpc mouda ash dyke rate contract for excavation, loading of pond ash from ash dyke ntpc mouda, transporting and unloading at construction site of road projects of nhai and other central or state government road construction department / authority / pmgsy road project...

National Thermal Power Corporation Limited - Chhattisgarh

29516592 s cpg1 194 job contract for transportation of fly ash to different locations situated within the radius of 100 kms of ntpc vindhyachal s cpg1 194 job contract for transportation of fly ash to different locations situated within the radius of 100 kms of ntpc vindhyachal...

Steel Authority Of India Limited - Chhattisgarh

25346349 contract for transportation of boiler coal from any location of bsp bhilai/nspcl (pp 2) bhilai to sru, bhilai and charging on the screening & crushing bunker after scrutiny.”...

Bharat Earth Movers Limited - Chhattisgarh

24955294 tender for road transport contract for transportation of components / engineering goods including spares by road from beml ltd, bilaspur to beml manufacturing units /regional & district offices and various parts of customer/vendors sites and vice versa for category – small consignment/lcv/mgv/16mt....

Bharat Sanchar Nigam Limited - Chhattisgarh

24914958 annual transport contract for transportation of telecom factory products as mentioned in this tender documents from telecom factory bhilai(cg) to different bsnl telecom circles including other telecom factories (to & fro) in anywhere in india on door to door delivery basis including loading at telecom factory, bhilai(cg) and unloading at the consignee’s place...

Bharat Earth Movers Limited - Chhattisgarh

24746827 tender for road transport contract for transportation of components / engineering goods including spares by road from beml ltd, bilaspur to beml manufacturing units /regional & district offices and various parts of customer/vendors sites and vice versa for category – small consignment/lcv/mgv/16mt...

Bharat Earth Movers Limited - Chhattisgarh

24595349 tender for road transport contract for transportation of components / engineering goods including spares by road from beml ltd, bilaspur to beml manufacturing units /regional & district offices and various parts of customer/vendors sites and vice versa for category – small consignment/lcv/mgv/16mt...

Bharat Sanchar Nigam Limited - Chhattisgarh

24493775 annual transport contract for transportation of telecom factory products as mentioned in this tender documents from telecom factory bhilai(cg) to different bsnl telecom circles including other telecom factories (to & fro) in anywhere in india on door to door delivery basis including loading at telecom factory, bhilai(cg) and unloading at the consignee’s place...