South Eastern Coalfields Limited - Chhattisgarh

14965063 supply of hardware items 1.001 gi nut bolt with washer , unc full thread m6 x 50 mm 1.002 gi nut bolt with washer , unc full thread m10 x 50 mm 1.003 gi nut bolt with washer , unc full thread m10 x 75 mm 1.004 gi nut bolt with washer , unc full thread m10 x 100 mm 1.005 gi nut bolt with washer , unc full thread m6 x 38 mm 1.006 gi nut bolt with washer , unc full thread m16 x 75 mm 1.007 gi nut bolt with washer , unc full thread m12 x 50 mm / 1 / 2’’ x 2’’ 1.008 m.s. nut bolt with washer , full thread m16 x 76 mm 1.009 m.s. nut bolt with washer , full thread m16 x 100 mm 1.010 m.s. nut bolt with washer , full thread m16 x 152 mm 1.011 nail ms wire 100 mm 1.012 wire nails ms 2 inches 1.013 wire nail 3 in 1.014 wire nails ms 1 inches 1.015 screw wooden 1 / 2inch 1.016 wood screw 1 inch 1.017 wood screw 1 1 / 4 inch 1.018 wood screw 1 1 / 2 inch...

South Eastern Coalfields Limited - Chhattisgarh

14518615 supply of hardware items: 1 gi nut bolt with washer , unc full thread m6 x 50 mm 2 gi nut bolt with washer , unc full thread m10 x 50 mm 3 gi nut bolt with washer , unc full thread m10 x 75 mm 4 gi nut bolt with washer , unc full thread m10 x 100 mm 5 gi nut bolt with washer , unc full thread m6 x 38 mm 6 gi nut bolt with washer , unc full thread m16 x 75 mm 7 gi nut bolt with washer , unc full thread m12 x 50 mm / 1 / 2’’ x 2’’ 8 m.s. nut bolt with washer , full thread m16 x 76 mm 9 m.s. nut bolt with washer , full thread m16 x 100 mm 10 m.s. nut bolt with washer , full thread m16 x 152 mm 11 nail ms wire 100 mm 12 wire nails ms 2 inches 13 wire nail 3 in 14 wire nails ms 1 inches 15 screw wooden 1 / 2inch 16 wood screw...

Indira Gandhi Agriculture University - Chhattisgarh

6595229 1cleaning jungle including uprooting of rank vegetation, grass, brush wood ,trees and sapling of girth upto 30cm measured etc complete.2excavasion of all type and size of foundation , trenches, drain or any other purpose including disposal of excavated stuff unto 1.5m lift and 50m lead etc complete.in all type of soilin ordinary rockin hard rock where blasting in prohibited3filling plinth and foundation with sand, crushed stone dust and hard moorum in layers not exceeding 20cm in depth consolidation each deposited layer by ramming and watering etc complete.4filling from available excavated stuff in trenches ,plinth sides of foundation in layers not exceeding 20cm in depth consolidation each deposited layer by ramming and watering etc complete.5providing and laying nominal .mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work c.c.1:4:8 c.c. 1:4:8 with 40mm aggregatec.c. 1:3:6 with 40mm aggregatec.c. 1:2:4 with 40mm aggregate6providing and laying nominal .mix cement concrete with crushed stone aggregate using concrete mixer in all work upto floor five level excluding cost of form work     c.c. 1:3:6with 20mm aggregatec.c. 1:2:4 with 20mm aggregate c.c. 1:11/2;3 with 20mm aggregate 7providing and laying nominal .mix reinforcement cement concrete with crushed stone aggregate using concrete mixer in all work upto floor five level excluding cost of reinforcement and form work    c.c. 1:2:4 with 20mm aggregatec.c. 1:11/2:3 with 20mm aggregate8providing and mixing water proofing materials cement plaster work in proportion as recommended by manufacturer9providing and placing in position reinforcement for rcc work including straightening , cutting, bending, binding etc complete as per drawings including cost of binding wire all complete. tmt barscold twisted bar/ hot rolled deformed10providing and fixing form work i/c centering shuttering proppingetc. complete and including its removal forfoundation, footing, base of colum, plinth beamwall of any thicknesscollumn rectangular or square.beam lintel cantilevers & wallssuspended floors, roofs, platform, balconiessheds , chajja and mouldingextra for propping from level four11brick work with modular well burnt clay bricks crushing strength not less than 25 kg/sq.cm. and water absorption not more than 20% in plinth and foundation cm 1:5 plinth and foundation cm 1:6 super structure cm 1:6 gf super structure cm 1:6 ff super structure cm 1:6 2nd fabove p.l. and unto floor five levelexrea for b.w. in square /rectengular pillar12half brick thick brick masonry with modular well burnt clay bricks crushing strength not less than 25 kg/sq.cm. and water absorption not more than 20% in superstructure above plinth level upto floor five level cement mortar 1:4 with hoping 25x1.6mm or 2 nos 6mm dia ms bars reinforcement at every third course of half brick masonry.13providing and laying damp proof course 50mm thick with c.c. 1:2:4 including form work14p&f in position doors, windows frames made from m.s. sheet pressed steel as per specificationsingle rebate 100x50mm 1.60mm thick sheetdouble rebate115x50mm1.60mm thick sheet15steel work riveted or bolted or welded in built up section trusses and frames work i/c cutting, hoisting and fixing in position and applying a priming coat of red oxideprimer etc.16providing and fixing m.s. grill of approved pattern made of m.s. flats or square or round bars welded to steel frames of window etc.17providing and fixing in position collapsible steel shutter with vertical channels 20x10x2mm and braced with flat iron diagonal 20x5mm with top and bottom rails etc complete fittings locking arrangement.18supplying and fixing rolling shutter of approved make of 80x1.25mm m.s. laths interlocked together.fittings for rolling shuttersa)      27.5cm long wire springb)      top cover c) ball bearing19steel work in tubular structure in built up section , trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level hot finished welded tubeshot finished seamless welded tubes20p& f approved pipe hand rail by welding to iron railingm.s. pipe g.i. pipe21p& f approved pipe hand rail to wall ( ramps, stair cases)m.s. pipe g.i. pipe22providing and fixing steel glazed door, window of standard rolled steel section complete with fittings etc. complete as per specification23providing and fixing float glass pans with steel glazing clips and special metal sash putty of approved make in steel door, window , ventolators.a) 4mm thickb) 5 mm thickc) 6 mm thick24providing and fixing m.s. fan clamps /hook for ceiling fan made out of 16mm m.s. barbend to shape etc. complete.25p&f broken glass over compound wall26providing and fixing in position g.i. barbed wire (93.8kg/m) to concrete/wooden/ angle iron posts including securing and screwing with g.i. tying wire , g. i. stapping, g.i. u nails etc complete.27providing and fixing aluminium work door/ window / ventilator and partition made out of extruded aluminium standard section (main section with minimum 1.5mm thickness) with cleats,striping gasket,beading,screw, clips etc complete (glazing and panelling to be paid for separately) a) for fixed partitionb) for shutter of doors/ windows/ ventilator including providing and making provision for fixing of fittings including the cost of pvc/ neopren gasketrequired ( fittings shall be paid for separately) with power coated c) extra for powder coated (minimum 50 micron) aluminium section instead of anodized.d) extra for polyester powder coated (minimum 50 micron) aluminium section instead of anodized.e) providing and fixing 12mm thick laminated particle board with decorative laminated on one side and balancing lamination on other sidef) providing and fixing 12mm thick laminated particle board with decorative laminated on both side.g) p/f glazing in aluminium frames with float glass 4 mm thickh) p/f glazing in aluminium frames with float glass 5 mm thicki) p/f glazing in aluminium frames with float glass 6 mm thickj) p/f glazing in aluminium frames with float glass 8 mm thickk) p/f six/seven levers approved lock.l) p/f isi make floor spring with steel cover plate etc. complete.28providing wood work in frames of door,window and other frames and fixed in position. teak wood sal, bijasal, benteak, haldu29providing and fixing flush door shutters decorative type core of block board construction with frame of first class hard wood andwell matched teak ply veneering with vertical grains, cross bandsbut excluding hinges 40mm thick (single leaf) 35mm thick (single leaf) 30mm thick (single leaf) 30mm thick (single leaf)25mm thick (double leaf for cupboard)30providing and fixing flush door shutters interior grade commercial type core of block board construction with frame of first class hard wood andwell matched commercial ply veneering with vertical grains, cross bandsbut excluding hinges 40mm thick (single leaf) 35mm thick (single leaf) 30mm thick (single leaf) 30mm thick (single leaf)25mm thick (double leaf for cupboard)extra for double leaf shutter31providing and fixing 35mm thick wire gauge shutter using galvanized ms wire dia of 0.45mm for door, window excluding hinges. bija, haldu, sal etc.teak wood32providing and fixing galvanised wire mesh 85g ms wire dia of 0.45mm including 62x19mm teak wood beadingproviding and fixing stainless wire gaugeof average width os aperture 1.56mm with wire of 0.35mm including beading etc complete33providing and fixing factory made upvc door frame of upvc profile section etc as per specification.extruded section profile size 48x40mm34providing and fixing factory made 25mm thick pvc flush door shutter made out of a one piece multi chamber extuded pvc section of the size of 762mx25mm etc. as per specification.35providing and fixing stainless steel door, window fittings with steel screw butt hinges 125x2.5 mm (heavy) butt hinges 100x2.5 mm (heavy)    sliding door bolt 300x16mm    sliding door bolt 250x16mm door latch 250x12 mm     tower bolt 200x10mm      tower bolt 150x10mm      handle 125mm p/f hanging door stopper 36providing and fixing corrugated g.i. sheet roofing with galvanized iron j or l hooks, bolt, and nuts 8mm dia. with bitumen and gi limpet washers etc. complete as per specification. 0.8 mm thick sheet 7.03 kg/sqm 0.63 mm thick sheet 5.70kg/sqm37providing ridge or hips 60cm overall in plain gi sheet fixed with galvanized washers jorl hooks etc. complete.a) 0.8 mm thick sheet 275 gms/sqmb) 0.63 mm thick sheet 275 gms/sqm38providing asbestos cement 6mm thick corrugated or semi corrugeted sheet roofing fixed with galvanised jor l hooks, bolts,nuts 8mm dia,bitumen washer etc complete as per specification39providing and fixing ridges and hips in asbestos cement sheet roofing fixed with galvanised jor l hooks, bolts,nuts 8mm dia,bitumen washer etc complete as per specification a) serrated or plain adjustable ridges40applying cement slurry on rcc slab or cc work using 2.75kg/sqm for receiving cement concrete floor complete416 mm thick plaster with cm 1:3 with a floating coat of neat cement and a thick coat of lime for bearing of r.c.c. slab and beam426 mm thick plaster with cm 1:3 .4312mm plaster with cm 1:54415mm plaster with c m 1:54518mm thickcement plaster with under layer of 12mm thick plaster 1:5 finished with top layer of 6mm plaster 1:346neat cement punning4718mm thickcement plaster with under layer of 12mm thick plaster 1:5 and top layer of 6mm plaster 1:3 finished rough with sponge48providing and mixing water proofing materials cement plaster work in proportion as recommended by manufacturer49moulded morter band in cement morter 1:4 per cm width a) 18mm thick50cement concrete flooring with 1:2:4 finish with a floating coat of neat cement40 mm thick50 mm thick75 mm thick51cement plaster skirting unto 30cm height with 1:3 finish with a floating coat of neat cement a) 18mm thick52precast terrazzo tiles 25 mm thick with white and black marble chips of size 6mm thick laid in floor, tread of stepsand landing on 25mm thick bed of c.m. 1:6 including rubbing and polishing etc. complete as per specification  light shed using white cement dark shade using ordinary cement.53precast terrazzo tiles 25mm thick with white and black marble chips of size 6mm thick in skirting and rises of steps on 12mm plaster 1:3 including rubbing and polishing etc. complete as per specification  light shed using white cement dark shade using ordinary cement.54chequered precast cement concrete tiles 25mm thick in footpath & courtyard on 20mm bed of cm 1:4 dark shed using ordinary cement.55providing and fixing ceramic glazed wall tiles conferming to is : 15622 of approved make , colours, shades and size on wall and dados over 12mm thick bed of cement morter 1:3 etc complete.56providing and fixing ceramic glazed floor tiles 300x300mm conferming to is : 15622of approved make , colours, shades and size laid on 20mm thick bed of cement morter 1:4 etc complete.in all colours except white, ivory, grey, fume, red brownin colours such as white, ivory, grey, fume, red brown57providing and fixing vitrified floor tiles with soluble salt printing of size 600x600mm with water absorption less than 0.5% and conferming to is : 15622 of approved make , colours, shades and size laid on 20mm thick bed of cement morter 1:4 etc complete.5825mm thick kota stone slab flooring over 20mm thick base of cement morter 1:4 jointed with grey cement slurry mixed with pigment to match the shede including grinding rubbing and polishing etc complete 5925mm thick kota stone in rises and treads of steps, skirtind, dado laid in 12mm thick cement morter 1:3 jointed with grey cement slurry mixed with pigment to match the shede including grinding rubbing and polishing etc complete 60extra for nosing in steps and treads of kota stone slab6125mm thick local rajim/ red flag stone slab flooring over 20mm thick base of cement morter 1:6 jointed with grey cement slurry mixed with pigment to match the shede including grinding rubbing and polishing etc complete 6225mm thick local rajim/ red flag stone in rises and treads of steps, skirtind, dado laid in 12mm thick cement morter 1:4 jointed with grey cement slurry mixed with pigment to match the shede including grinding rubbing and polishing etc complete 6315mm thick marbla stone slab flooring over 18mm thick base of cement morter 1:4 etc complete.a) makrana white second qualityb) udaypur green marble6315mm thick table robbed granite stone slab flooring over 12mm thick base of cement morter 1:3 etc complete.a) granite stone lakha red/ shahi red64providing and applying 2mm thick ready mix exterior grade putty ( birla wall care, ncl, jk wall putty) on walls to make the surface smooth and even.65preparation of wall surface by applying a coat of putty of chalk mitti, white paint etc. and making the surface smooth to proper shape and presentable conditions66distempering 2 or more coat with acralic washable distemper to give an even shade on new work67applying one coat of cement primer on wall surface68painting new exterior surface (two or more coat) with primium taxtured paint as per specificationon new work (two or more coat)on old work (one or more coat)69wall painting with acrylic premium emulsion (plastic) paint to give an even shade70painting on new work (two or more coat) to give an even shade with synthetic enamel paintfinishing wall with water proofing cement paint to give an even shed...

Public Health Engineering Department - Chhattisgarh

6248678 providing, supplying, fixing and testing of frp body bio fluoride removal plant hand pump attach unit including safety cage of ms wire with all taxes etc. complete 500 litre/hour capacity in the 1) ramchandrapur (a), 2) ramchandrapur (b), 3) balrampur blocks....

Coal India Ltd - Chhattisgarh

5854710 supply of hardware and miscellaneous items (spare kit for ml 10 contactor 415 v auxilary contactor 415 v 10 amp type:pak 8us, repair kit for contactor pak 450 u repair kit for contactor 415 v 315a type pak 225us, l&t make thermal timer 6t 200 440v50 part no.ss91270, over load relay range 180 300a ct optmn12 part no.ss91000, repair kit for ml12contactor operating coil for ml 12 contactor, contactor 415 v 400 a ml 12 eh 370, ac contactor rated 70 amp 415 v with auxilary conta., timer range 0.5 to 60 sec.cat. nokrtpn 10, auxilary contactor for ml 12 contactor 415 v 1no 1nc,actuator type tk 3 with element 2no 2nc,10 amps 415 v red color, operating coil for contactor type 3ta 26 415v 170 amp.,complete contactor unit 170 amp 415 v, 2no+2no 3 pole type 3tf 5202 0ar03t, over load relay range 160 to 250 amp 415 v, opearting coil for pak 22 us 415 v contactor, opearating coil for contactor type pak 450 us/420 a 415 v ac rope sealing 19 mm dia 5t capacity, battery terminal negative, battery terminal posetive, files round smooth 200 mm, files round rough 200 mm, hacksaw frame 12in x 1/2 inch, combination plier 8inch, nose plier 8 inch, screw driver 8 inch (22x90) 5x200 tip 0.8x5, screw driver 10 inch, screw driver set, spanner de 24x26 mm, spanner ring 24x26 mm, box spainner 12x13 mm, box spainner 16x17 mm, box spainner 21x23 mm, box spainner 18x19 mm, box spainner 20x22 mm, box spainner 24x26 mm, slide wrench size 10 inch (taparia make), hammer 2lbs, allen key 2 mm to 10 mm, socket set 1/2sq. drive,8mm to 32 mm 22, digital multimeter anolog multimeter 1000 vac 250 milli amp, measuring tape 3 mtr, hand drill machine 10 mm, crimping machinge complete, tong tester 1000 amp 600 volt tester neon line 500 v, earth tester, belt fastner 2 inch, soldring wire 50gmx20, hammer 10 lbs, hacksaw frame 12 inx 1/2 inch, hacksaw blade 1/2 inx 12 inch, combination plier 8 inch, nose plier 8 inch, screw driver set, spanner ring set 6mm to 32 mm, digital multimeter, crimping tool rj11, crimping tool rj45, krone tools, tester neon line 500 v, soldering iron 65 w 230 v,ht nut & bolt m27x200mm, ht nut and bolt 19mmx 25 mm (3/4x1), ht nut and bolt 19mm x112 mm (3/4x4 1/2), ht nut and bolt 20 mm x 100 mm x 2.5 mm, ht nut and bolt 22 mm x 60 mm (7/8 in x2.3/8, inch), ht nut and bolt 25 mm x 87 mm (1 in x3 1/2 inch), ht nut and bolt 25 mm x 280 mm(1 in x 11 1/4 inch), ht nut and bolt 12 mm x 162 mm (1/2x6 1/2), ht nut and bolt 16 mm x 100 mm (5/8x4), ht nut and bolt 22 mm x 100 mm 7/8 in x 4 in,ht bolt 16 mm x 25 mm/5/8 inch x 1 inch with dbl nut, ht nut and bolt 16 mm x 87 mm (5/8 x 3 1/2), ht nut and bolt 25 mm x 112 mm (1 in x 4 1/2inch), ht nut and bolt 25 mm x 152 mm (1x6 inch), ht nut and bolt 16 mm x 64 mm (5/8x2.50/2.75), ht nut and bolt 25 mm x 100 mm(1 in x 4 inch), pin insulator 33 kv with pindisc insulator 11 kv, disc insulator hardware for 11 kv, pin insulator 11 kv with pin, ht tape 3/4 inch, tape empire 3/4 inch, tape pvc steel grip 3/4 inch, lighting arrestor 3.3 kva, lighting arrestor 440 v, shackle insulator 115 mm x 100 mm, hardware/g.i.strip for shackle insulater 185x30x18, post insulator 33 kv grade turn buckles, stay rod g.i. with compt fitting 3/4 7/8 inch, bobbin insulator 40 mm, telephone cable jointing kit 10 pair, jointing kit 20 pair, thermoshrink jelly filled telephone, cable jointing kit size 50 pair, pvc cable drop 0.9 mm dia manila rope 25mm/1 inch, nylone rope 1/2 inch, thinner,red oxide paint/primer, painting brush 4 inch, gi nut and bolt 1/4 inch, gi nut and bolt 5/16 inch, gi nut and bolt 3/8 inch, gi nut and bolt 1/2 inch, ms nut and bolt 19 mm x 76 mm inch (3/4 x3), mm 19x76), ms nut and bolt 19 mm x 102 mm inch (3/4x4), mm (19x102), ms nut and bolt 19mm x 127 mm inch (3/4x5), mm (19 x127), ms nut and bolt 12 mm x 50 mm 1/2 inch x 2 inch, ms nut and bolt 12 mm x 75 mm 1/2 inch x 3, inch, wire nails ms 1 inches wire nails ms 1 1/2 inches wire nails ms 2 inches, nail 2 1/2 inch wire, nail 3 in nail ms wire 100 mm)....

Airports Authority Of India - Chhattisgarh

3355310 auction sale of ms angle/channel, ms angle framed, ms box section, ms flat strips, ms leaf gate, ms angle, gi chainlink fencing, ms wire fencing, old barbed wire, hydraulic door closer, brass fittings, wooden piecesm, hydraulic floor spring, ms pipe, g.i.pipe, old steel bars, ms road roller, signage board, false ceiling, old cattle catcher, door shutters, g.i.fittings, alu section/fittings, miscllaneous...